Win $17,760 For Your Truck! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping! Get it by Dec 24th available on most items - Details

Airaid Cold Air Dam Intake w/ SynthaFlow Oiled Filter (11-14 3.5L EcoBoost)

Market Price $468.27 You Save 13% ($61.08)
Starting At

$407.19

FREE Shipping
  • Item T527268-C
  • MPN# 400-101

Will this fit your F-150?

Features, Video & Details

  • Improves Horsepower and Acceleration
  • Black Intake Tube
  • Oiled - SynthaFlow Filter Included
  • No Computer Re-Tune Required
  • Washable and Reusable Filter
  • CARB EO Number: D-609-14
  • Fits 2011-2014 3.5L EcoBoost F-150s

Review & Installation Video

Review & Install Video

Pack in the Power. Make your pickup truck into a more capable tool by boosting its power with this Airaid Cold Air Dam intake. It's simple in construction but helps boost power in a big way. The set allows air to move to the engine faster and with less effort. This results in major power increases. The set features a washable filter, a heat shield and intake tubes.

Without Tuning. Tuning your truck is a method to increase its power, but it's not always necessary and you don't have to do it to make use of this intake kit. Instead you can just install it and start using it from there. Without worrying about tuning this upgrade is more affordable and a good investment for you to make.

Effective and Fast Filtering. Take your filtering power to the next level with this intake set. It's designed with a top level filter setup that will stand out during use. While using it you'll cut out most of the particles fast with premium cotton covered in a special oil compound. What is remaining will be removed with a fine mesh nano material that gets rid of items down to 2 microns in size. What is left is clean air that is ready for use in the engine.

Designed to Last. This Airaid Cold Air Dam Intake is made to hold up thanks to top quality materials. It's built from a mix of plastic and stainless steel. The clamps and fittings are made from tough stainless steel. The heat shield and the intake pipe are made from thick plastic material. Together you get a tough product that will hold up nicely over time.

Install with Speed. This Airaid Cold Air Dam Intake goes on in an hour or less and it does so easily. The kit relies on standard hardware to lock it in place. Put it on and you'll be ready to use it without tuning, or any special tools to get the job done.

A Two Year Warranty. Airaid offers 2 years of warranty protection on this kit. It's offered to inspire confidence in the product.

Widespread Acceptance. This CARB approved part is designed to pass smog tests all over the country. It can be used in all 50 states legally.

Application. This Airaid Cold Air Dam Intake with a SynthaFlow Oiled Filter is specifically designed to fit the 2011-2014 3.5L EcoBoost F-150s.

Note: Coupon codes cannot be applied to this product.

Fitment: 2011 2012 2013 2014 Details

What's in the Box
  • (1) Air Filter
  • (1) Intake Tube
  • (1) Sensor Tube
  • (1) Rear Panel
  • (1) Front Panel
  • (1) 4" Coupler
  • (1) 3" Coupler
  • (1) Hump Hose
  • (1) Weather Strip
  • (2) #48 Hose Clamps
  • (1) #56 Hose Clamp
  • (2) #64 Hose Clamps
  • (1) #68 Hose Clamp
  • (1) Hex Plug
  • (1) Barbed Fitting
  • (2) 1/4-20 x 1/2" Button Head Screws
  • (2) 1/4" Flat Washers
  • (4) 6-32 Kep Nuts
  • (4) #6 Flat Washers
  • (4) 6-32 x 5/16" Phillips Head Screws
  • (1) MAP Plug
  • (2) 8-32 x 1/2" Button Head Screws
  • (1) MAF Cap
  • (1) MAF Gasket
  • (1) #8 Flat Washer
  • (1) 8-32 x 5/8" Button Head Screw
  • (1) T-20 Torx Bit
Installation Info
Will it fit my F-150?

Most Helpful Reviews

5/5
Intake

This is by far the best cold air intake I ever bought.

Helpful (0)

4/5
Great buy first real mod

I bought it to get my truck to intake more air for my duel exhaust up grade easy to install sounds really good too

Helpful (0)

Overall Rating 4.5 out of 5 stars
Read All 2 Reviews

Customer Photos (1) Submit Your Photo

View 1 Photo

You Might Also Like

1 Questions / 1 Answers

Ask a Question

Does the cold air intake enhance horsepower or torque? If so, by how much? I have a 2014 ford f150 eco-boost and I'm wondering what the benefits would be with this intake. Thanks

pipergraves

  • The Airaid Cold Air Dam Intake - SynthaFlow Oiled Filter will increase horsepower and torque as a direct result from being more efficient. Airaird has not release the power yield, and since we have not yet measured using a dyno, we would not be able to provide accurate yields.

    AMJEFF

Helpful (0)

More Products You Might Like

Customer Reviews (2) Write a Review

Overall Rating 4.5

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 3.5 3.5
  • Fit 5 5



  • 4/5

    Installation Time: Less than 1 Hour

    November 27, 2017

    Great buy first real mod

    I bought it to get my truck to intake more air for my duel exhaust up grade easy to install sounds really good too

    DerickS

    Year: 2013 Submodel: 3.5L V6 EcoBoost FX4

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 16, 2017

    Intake

    This is by far the best cold air intake I ever bought.

    GeorgeA

    Year: 2014

    Helpful (0)

Related F-150 Categories