Review & Install Video
Hey, everybody, I'm Justin with americanmuscle.com, and welcome to my detailed overview of the Airaid MXP cold air intake system with the Synthaflow oiled filter, available for your 2015 and newer 5.0-liter powered F-150.
Well, you guys should know the deal by now. We're gonna talk about what you can expect as far as benefits when running the Airaid kit. We're gonna talk about what's included as far as construction and materials. And then last but not least, we'll quickly break down the install. And on the surface, you're looking at a very straightforward one out of three wrenches on the difficulty meter, with some more detail later in the video. The MXP from Airaid is going to appeal to the 5.0-liter truck owners out there looking to get their hands on one of the nicest cold air intakes in the category and don't mind spending top dollar to get that. Now, this is also gonna be a pretty versatile intake being able to run with or without a tune, in addition to being able to run with a sealed enclosure like it is now or removing that top on the airbox and being able to run as an open element style filter.
So the Airaid stuff continues to be a top choice here at americanmuscle.com for both Mustang and F-150s alike, and it's pretty easy to see why, at least in my personal experience. Their intake continues to be one of the nicer options you can get your hands on, as we already pointed out. They fit great. And for the most part, they're gonna perform as advertised. And I say for the most part in regards to performance because Airaid's claims with this particular intake for the 5.0-liter truck are a little lofty. In fact, they're claiming 19 horsepower, 26-foot pounds of torque at the rear wheels, with this no tune intake installed onto your 5.0-liter truck. Frankly, I just don't think that's gonna happen. The more realistic expectation when bolting something like this up is going to be high single digits, low double digits, and that's what I would expect here with the MXP.
Yes, ultimately a tune would help uncork some of the true potential of the MXP intake along with your 5.0-liter powerplant, but that is going to be your call at the end of the day. One good thing to point out, however, with this intake is that, yes, it is 50-state legal, it is CARB certified, does come along with the matching sticker, of course, so you don't have to worry about catching any flack from your local authorities. But as always, guys, there's more to just an aftermarket cold air intake than power alone. There are some other cool benefits to talk about. One in particular with the MXP here is very unique, and that is the removable lid. I like this for two big reasons. First and foremost, it's gonna allow you to check the condition of the Synthaflow oiled filter at any time, just letting you know when it's time to clean this thing.
The second reason I like this is that it does give you some options on how you want to run the cold air. Leave it on for a sealed enclosure. It's gonna help keep things quiet, but it's also gonna help combat some of the high engine bay temperatures that can oftentimes hurt your intake air temps. Now, pop that top off, and you're instantly looking at an exposed element type intake here which is gonna deliver a whole bunch of noise that is oftentimes awesome, especially with the 5.0-liter truck, with the slight drawback of maybe slightly higher intake air temperatures. Either way, guys, the best part is, it's only four screws you have to remove to remove or put this thing back on, making it very easy to switch at any point.
Let's talk a little bit more about the construction and materials with the Airaid because obviously I'm on record saying how nice this thing is, and I'm definitely not lying, guys. I really enjoy these intakes. Roto-molded plastic intake tube and matching airbox here, also includes some ducting which will help draw in fresh cool air from the front of the truck, something that I really enjoy. Inside the roto-molded plastic intake box, you will find one of Airaid's signature filters. This is their Synthaflow oiled filter. It is washable, it is reusable, and obviously you do have to re-oil this thing to properly maintain it. Some of you guys might have your own hangups about using an oiled filter on your truck, and if that is the case, then you can always check out one of Airaid's Synthamax dry filters instead.
We do also offer those here on the site. But either way, guys, the Synthaflow filter that is included with this particular kit is one of Airaid's most popular options in their lineup. Does feature a synthetic nanoweb material and captures particles down to two microns in size. How small is that? I don't know, pretty damn small. I'm sure it'll filter everything just fine. And in my opinion, there's really no drawback to using an oiled filter on your 5.0-liter powered truck, as long as you're very careful not to over-oil the filter when cleaning.
You are definitely getting a big boy intake in regards to price here. As I pointed out at the top of the video, guys, this is a premium option, and as such, you're dropping just over 400 bucks for the MXP from Airaid. But, again, in my experience, you get what you pay for in this industry, and the Airaid certainly doesn't disappoint there in regards to materials and of course the fitment.
And speaking of fitment, let's talk a little bit more about what you can expect when it comes time to start wrenching. Very straightforward stuff, guys. We're calling it one out of three wrenches on the difficulty meter. We call it an hour on the site from start to finish, but I wouldn't be surprised if most people can bang this one out in about 30 minutes or less, just like your favorite pizza joint. Now, you're gonna need some basic hand tools. I'm talking Phillips-head screwdriver, flathead screwdriver, 8-millimeter socket, 10-millimeter socket, and the one random tool that you will need to help you out here that you might not have in your arsenal is a set of torques bits, just to help you remove that mass airflow sensor.
So once you have everything you need to get started, remove that factory intake. Very simple stuff there, guys. Disconnect it at the throttle body. And I like to kind of remove everything in one piece. Once that is out of the way, go ahead and assemble your Airaid out of the truck. Again, just get everything together, get it put together, and then install it in one piece as well. Trust me. This is the easier way to do things. Once you have everything in place, just tighten everything down, and you should be good to go.
The quality of build and fitment with Airaid products continue to make them one of my favorite for both Mustang and F-150 owners alike, and the MXP simply just carries on that tradition. You're getting a small bump in power here, a nice little underhood appearance bump as well, and last but not least, you do got some versatility with that removable top. So that is my review of the MXP, which you can grab right here at americanmuscle.com.
Notch up the Power.
This Airaid MXP Series cold air intake adds real power to your truck in everyday driving situations. It's carefully molded to bring in as much oxygen as possible to the engine during use. That means you get more horsepower and a more efficient engine as well. That's why this is the upgrade of choice for many truck owners looking for more power. Consider adding this intake system if you want to maximize your engine.
There isn't a demand to retune your truck to make this kit work. It's a good idea if you want to make the most of the upgrade, but it will function just fine once installed without going through the trouble of tuning it all. That's why many people just decide to use the stock tune settings with this upgrade and they do so just fine.
Top Grade Filter.
This Airaid MXP Series cold air intake comes with an industry-leading auto filter. The filter is fully resuable so you can wash it and put it back in your truck again and again. It's made of oil coated cotton strands that block most dust and particles and a very fine layer of nano mesh behind that for the really small stuff.
Tough Design Materials.
The whole unit is made to last and to hold up against weather, corrosion, heat and other issues. The body of the intake is composed of very carefully molded polyethylene that's been assembled for maximum strength. Silicone and rubber is used at the joints of this product and stainless steel clamps hold it all in position. a billet aluminum plate adds style and added protection to the whole kit.
This Airaid MXP Series cold air intake is fitted with a polyethylene MAF box that's fitted with a billet aluminum plate for addes strength and style points. What you get is a functional box that permits excellent airflow.
Installation Goes Fast.
There's no need to worry about going through a complex installation procedure to make this kit work. You put it into position and you bolt it on. That's all there is to it and it's very simple.
Long Term Protection.
A warranty for two years is given to this Airaid MXP Series cold air intake. You can expect the company to back it up for that long.
This CARB certified intake is good for use in all 50 states. It's legal and will pass emissions tests without trouble.
The Airaid MXP Series Cold Air Intake is specifically designed for the 2015-2017 Ford F-150s equipped with the 5.0L V8 engine.
Note: Coupon codes cannot be applied to this product.
- What's in the Box
- (1) Premium Filter
- (1) Cold Air Box
- (1) Air Inlet
- (1) Intake Tube
- (1) Air Box Lid
- (1) Lid Gasket
- (1) Hump Hose
- (1) Reducing Coupler
- (1) Filter Adapter
- (1) #56 Hose Clamp
- (1) #64 Hose Clamp
- (1) #68 Hose Clamps
- (1) Small Aluminum Fitting
- (1) Large Aluminum Fitting
- (7) Button Head Cap Screws
- (7) 1/4" Flat Washers
- (2) 8-32 x 5/8" Button Head Screws
- (2) #8 Split Lock Washers
- (2) #8 Flat Washers
- (1) 5/8" ID Grommet
- (1) 1/2" ID Grommet
- (1) 13/16" ID Grommet
- (1) Spacer
- (2) Plastic Rivets
- Installation Info
Installation Time: (approx) 1 Hour
Difficulty Level:Simple installation for anyone
- Will it fit my F-150?