Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install Axial Black Projector Headlights w/ LED DRL (15-17 w/ Halogen Headlights) on your Ford F-150

Tools Required
  • Ratchet
  • 7 mm socket
  • 10 mm socket
  • Flathead screwdriver
  • 8 mm socket
  • Plastic Pry bar
American Muscle
Shop Parts in this Guide

BEFORE INSTALLATION

If you experience any difficulties that the instruction did not cover, please seek assistance at local automotive shop. Please wear protection before you work on any vehicle.

• An assistant is useful when removing the front bumper from your vehicle.

• Please be cautions when working with the bumper or any parts belonging to the vehicles's body to prevent scratching. Do not make direct contact with the halogen bulbs or the wire assembly until the unit has cooled down after use.


Remove the headlight trim fastener


Remove (2) 7mm headlight trim bolts


Remove the headlight trim


Remove (1) 8mm bolt and (5)10mm headlight bracket bolts       


Remove (1) 8mm bolt and (5)10mm headlight bracket bolts      


Press down retaining clip with flathead screwdriver to loosen bracket


Gently pry and loosen headlight bracket


Remove (1) 10mm front headlight bolt deep behind grille      


Remove (2) 10mm upper headlight
bolts


Remove the healight housing and
disconnect the sockets and connectors


Remove the parking light socket


Remove the parking light bulb


Attach the LED connector to the parking light socket


Secure the parking light socket onto LED headlights


Connect the main light connector to the projector headlight housing


Secure all the connectors and sockets to the LED headlight housing


Secure the headlight housing


Reinstall (2) 10mm upper headlight bolts


Reinstall (1) 10mm front headlight bolt deep behind grille


Secure the headlight bracket back into the original position


Secure the headlight bracket fastener


Reinstall (1) 8mm and (5)10mm bracket bolts


Reinstall the headlight trim


Reinstall (2) 7mm headlight trim bolts


Secure the top headlight trim fastener


Please repeat the steps from 1 to 25 for the opposite side


The installation is now complete