Transform your stock truck into a sexy low rider that turns heads and offers a nice smooth ride over the road with this Belltech lowering kit. It's simple to install and can cut between 2"" and 3"" off the height of your truck. Sure you'll cut out some of your ground clearance, but you'll add to your style and create a more efficient truck. The kit comes with a flip kit and springs to do the job, and everything's made from rock solid parts for performance you can count on after the modification. Put it into place and you'll be riding lower to the ground, it's that simple.
Coated Pro Steel Springs.
The pro springs included in this Belltech lowering kit is smaller than standard springs to effectively drop the level of the truck down by between 2"" and 3"" in height. The springs are protectively coated against corrosion and designed to offer the same level of support as longer springs, so they are a bit stiffer.
Plate Steel Flip Kit.
The included flip kit is made from durable plate steel that's powder coated for strength. It's designed to swap your leaf springs up above your axle instead of below it. This drops the height of the truck significantly.
Detailed Installation Steps.
Belltech estimates 2 to 4 hours to install this kit properly making it a mid-level lowering kit in terms of installation. Seek professional help to swap the rear axle position around and to swap the installed springs with these aftermarket springs.
Extended Warranty Protection.
Belltech offers a lifetime limited warranty on both the springs and the flip kit included in this lowering kit. You're protected the entire time that you make use of them.
Drop your 2009 to 2013 Ford F-150 standard cab short bed truck down with this Belltech Flip Kit.