Simple installation for anyone.
- How to Install AmericanMuscle Wheels on Your Mustang
- Customer Submitted:
- How to Install Wheels on Your 1979-2013 Mustang
$399.99 (each)FREE Shipping
Popular Tire Setups for this Wheel
Sorry, mount & balance is not currently available for tires on this wheel. Wheels & tires ship separately.
Hey Justin here with AmericanMuscle.com, and I'm checking out Forgestar's F15 monoblock wheels, available in your choice of either matte black, gun metal, piano black, and silver, fitting all 2005 and newer Mustangs. At first glance you can see the design of the F14 Is more of a multispoke mesh wheel design, which has become extremely popular with the Mustang crowd as of late, which is course due to cars such as the RTR and the 2013 GT 500, both of which sport a variation of the mesh wheel design. These monoblock or one piece aluminum wheels go through an advanced process during production called rotary forging, this greatly improves the strength of the wheel, specifically the barrel, and generally reduces the weight of the wheel itself. The F14's are offered in a wide variety of sizing options including an 18, 19, and 20 inch diameter, and in 9, 10, and 11 inch widths. Because there are a few different width options available, you can easily achieve that classic staggered look, by sticking a wider rear wheel and tire in the back versus the front, which in my opinion is the only way to roll. Chances are if you're buying new wheels, you're going to need new tires, we offer a pre built combinations, where we pair your F14's up with some of the top tires on the market today, in sizes that are guaranteed to fit your car without rubbing, even if you're lowered an inch or two. Of course you can also take advantage of our free mounting and balancing, free shipping and handling. Finally, all Forgestar wheels are backed by a lifetime structural warranty. When it does come time to install your new wheels just grab a floor jack and some basic hand tools. You'll want to crack the lugs loose first on the stock wheels before getting the car in the air, after you do that, jack the car up and swap the 4 wheels and tires. Doesn't get a lot easier than this, but since there is a little work involved, we'll call it an hour from start to finish. So if you're looking to take a break from the standard 5 spoke wheel and you want to go with a more modern multispoke mesh wheel design, then be sure to check out these quality lightweight aluminum wheels from Forgestar available right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Recommended Tire Size:
Note: Requires either tuner lug nuts or 6-spline style lug nuts. - The stock lug nuts (13/16”) prove to be too large when used in conjunction with these wheels. Please take a look at the Lug Nut Ordering Options above for some compatible options.
Fitment: 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
May 10, 2016
More Rubber equals More Traction
I bought these in combination with the 19x11's for the rear. The Performance Pack wheels are nice but simply do not hold enough footprint, especially when you start adding power. With these wheels, I am able to get a ten inch footprint and help my cornering ability. They look great with the car lowered a little over an inch. I was waiting for the GT350 wheels, which were backordered, but I am glad that I couldn't wait anymore. The weight savings were huge when compared to my factory wheels. Traction and weight savings while adding to the appeal of my ride!Helpful (19)
November 13, 2015
These wheels are alright. I got these one because I thought they were going to look good and be made right. They don't look as good as I thought they were going to. I think the design just doesn't work with the car.Helpful (17)
I have these wheels on the front of my 2013 Boss and want to know if they'll fit on the front of the 2017 GT350?
Yes, this is the same wheel we as the one we advertise to fit your 2013 so this one will fit no problem. You also have nothing to worry about fitment for the front. As a good rule of thumb, any wheel where the second dimension is 10 or larger, it will not fit up front.
Simple installation for anyone.
What's in the Box
|Placement:||Front or Rear|
|Offset:||1.14 Inches, 29mm|
|Backspacing:||6.40 Inches, 163mm|