- (4) Wheels
- (4) Center Caps
- (4) Tires
- Hardware included:
- None Required
Free Shipping On Orders Over $49. Details
$1,343.92
FREE ShippingAdd FREE Nitrogen Fill
Add Road Hazard Protection
Add TPMS Sensor Kit (recommended for 2007+)
Add TPMS Tool (Required to Sync TPMS Sensors)
Notify me when it's back in stock.
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Current Item:
Staggered 2010 GT500 Style Black Machined Wheel & Mickey Thompson Tire Kit - 18x9/10 (05-14 All)
Total Price with All Options:
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Hey everyone, I’m Justin with AmericanMuscle.com, and I’m taking a look at our AmericanMuscle GT500 Style Wheels for your 2005 and up Mustang. GT500’s have always been one of the baddest Mustangs on the block and now your ride can enjoy the stylings of the 2010 GT500, thanks to these split 5-spoke wheels. The wheels are available with 3 different finishes, including a black painted finish, a triple dipped chrome finish, or a black machined finish. As for the sizes, the wheels are available in either an 18” diameter with an 8 inch front and 9 inch rear, or a 19” diameter with an 8.5 inch front and a 10 inch rear. Staggered fitment is cool for a couple of different reasons. First off, it looks awesome. A wider rear wheel not only improves your stance, but also helps get that power down to the ground thanks to the wider rear tire and contact patch. Not only that, it also makes for more responsive handling as well, thanks to the narrow front tire. It’s a win-win. Now, you can purchase these wheels without tires if you want; however, the smart move would be to take advantage of one of our wheel and tire combos that pair your new GT500 style wheels up with some of the better performing tires on the market today in sizes that are guaranteed to fit without rubbing, even if you’re lowered an inch or two. Not only that, you also get to take advantage of our free shipping and handling, free mounting and balancing, and optional nitrogen fill. Remember, you 2007 and up folks have to keep in mind your vehicles are equipped with a TPMS sensor. This means a tire pressure monitoring system that needs to be addressed when ordering new wheels. These aluminum AM wheels are extremely durable, but if you ever encounter any problems, every rim features a lifetime structural warranty, as well as a one year warranty on finish, you can’t beat that. There are very few mods on the market today that can change the attitude of any ride like a new set of shoes. These AmericanMuscle wheels are sure to offer the modern aggressive stylings that look great on any Mustang.
Road Hazard Protection. AmericanMuscle is proud to offer an optional Road Hazard Tire Protection program to our customers who purchase a Wheel and Tire Package from us. With this program, you will receive a 3-Year/36 Month protection plan for changing of flat tires and flat tire repair.
36 Months of Protection. The Road Hazard Protection Program is good for 3-Years (36 Months) from the purchase date printed on the program certificate or until any part of the tire tread that comes in contact with the road has a tread depth of 2/32” or less, whichever comes first.
Flat Tire Changing Assistance. Enrolled customers are eligible for reimbursement of up to $75 for roadside flat changing assistance provided by a licensed service provider. This is limited to the roadside installation of the customer’s own usable spare tire. Customer must have a spare tire. The customer would pay the service provider for flat tire changing and then be reimbursed.
Flat Tire Repair. Enrolled customers are eligible for Flat Tire Repair up to $20 per tire. This repair would include labor and patch. Reimbursement is limited to two flat tire repair claims during the coverage terms of 3-Years/36 months. The customer would pay the service provider for flat tire repair and then be reimbursed.
Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details
Mounting & Balancing: AmericanMuscle offers professional mounting and balancing on all wheels and tires when purchased together on the same order for an additional fee. This will allow you to swap out your old wheels for your new set when they arrive. We even offer Free Nitrogen tire fill.
What is TPMS? The Tire Pressure Monitoring System (TPMS for short) is a factory installed safety feature on all 2007 and newer Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels do not come with TPMS sensors. However, if you select 'Add TPMS Sensor Kit' and your specific year range from the options listed above, we'll install the TPMS Sensors in your new wheels free of charge!
For more Information, check out TPMS Sensor Kits or TPMS Tool in detail.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Difficulty Level:Simple installation for anyone
Installation Guides:
Manufacturer: | AmericanMuscle Wheels | Style: | GT500 |
Size: | 18x9 / 18x10 | Finish: | Black Machined |
Placement: | Front and Rear | Centercap Size: | N/A |
Back Spacing: | 6.18" (157mm) / 7.24" (184mm) | Offset: | +30mm (1.2") / +45mm (1.77") |
Bolt Pattern: | 5x4.5”(5x114.3mm) | Weight: | |
Material: | Aluminum | Lip Size : | N/A |
Best Tire : | Included | Year/Model: | 2005-2014 All, Excluding 2013-2014 GT500 |
Tech Guides:
My 07 mustang is lowered 1.5" will these tires and rims stay with in the wheel well or will the stick out some or rub the fenders at all?
All of our premade wheel and tire kits are guaranteed to not cause any rubbing as long as your Mustang is lowered 2" or less.
What is the hub bore for these wheels? I want to put them on a car with a 70.5 mm hub and was wondering if they'll fit.
The 2010 GT500 Style Black Machined Wheel will have a 70.6mm hub bore.
Will a 295/40/18 tire fit on this rim and still fit within the rear fenders on a 2013 gt convertible?
Yes, a 295/40/18 will fit the 18x10 2010 GT500 Style Black Machined Wheel and will sit within the fender on a 2013 GT Convertible with stock suspension. If the vehicle is lowered you may run into issues with the tire rubbing against the fender.
Will these fit a 235/45 r 18 tire without having a bunch of rim showing.
While capable of fitting a 235/45R18 tire, the 2010 GT500 Style Black Machined Wheel in 18x9 would not be recommended as it will have a slight "stretched" look.
What is the offset and backspacing on the 18x10 wheel? I was wondering if I can fit it up front with 285s. Planning to run a square stance. Thanks
These 2010 GT500 Style Wheels have a +45mm offset which would only allow it fit properly in the rear. Most 10 inch wide wheels in the front are going to cause rubbing, especially with a 285. The use of this wheel on the front would require some modification and an aggressive alignment - however, it could ultimately still result in rubbing.
The Staggered 2010 GT500 Style Black Machined Wheel and NITTO INVO Tire Kit is designed to sit flush with the fender lips.
The machined surfaces will have a clear coating to them.
These wheels will certainly fit on the front and back with standard brakes.
The 2010 GT500 Style Black Machined Wheel - 18x9 will fit a 2011 V6 Mustang. We do not offer the SUMITOMO HTR Z III Max Performance Summer Tire in a size that would fit, however we do offer the Sumitomo High Performance HTR Z II Tire - 255/45R18 (Item 63008) which is the recommended size for that size wheel. Sumitomo High Performance HTR Z II Tire - 255/45R18: http://www.americanmuscle.com/sumitomo-htrzii-255-45-18.html
Yes, this wheel and tire kit will fit on a 2010 Shelby GT500 convertible Mustang.
Yes, these will support both the stock tires and the stock TPMS sensors.
There are some chemicals out there, however, we have not tested any particular coatings to suggest a particular brand, but there is non-corrosive wheel cleaner, and sealant. If you are looking for a longer protection, I would recommend speaking with a detailer regarding ceramic coatings for your wheel.
The 2010 GT500 Style Black Machined Wheel - 18x10 (05-14 All) can work with the same size tire all the way around however a 235 would not work. The 235 would be to small for the 18x9s also. You would need at least a tire size of 245 for the 18x9. or a tire size of a 265 to fit on all four staggered wheels.
The same size lug nuts you have now should fit perfectly fine. The stock size lug nuts will work as well.
Even though the center caps for the Staggered 2010 GT500 Style Black Machined Wheel & NITTO INVO Tire Kit - 18x9/10 (05-14 All) and the standard Mustang center cap are both 2.5", the Mustang center caps will not fit properly as they have a different tooth length.
Installation Time:Afternoon
Installation Cost:0-$100
November 12, 2018
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
Awesome wheels!!
These are the absolute best looking wheels for a S197 Mustang!
Installation Time: Afternoon
October 13, 2018
Review from Staggered 2010 GT500 Style Black Machined Wheel & Sumitomo Tire Kit - 18x9/10 (05-14 All)
Great wheels
Great look clean and easy to install balancing is off a bit but free
March 24, 2018
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
Should be part of an SUV conversion kit
The wheels undoubtedly look great by themselves, but unfortunately when they are installed, due to their offset, these wheels stick too far out when compared to the actual OE GT500 wheels. This causes the following: - Viewed from the side, accentuates the tall OE ride height. it makes my Mustang have now the ride stance of a truck. That pretty much forces me to buy a lowering kit. - Pushing the tires out also ruins the looks from the front, now I also need a front chin to try to make up for the front look. A lower suspension would also help to tuck the rims in a little bit. Initially I thought it would take some time for me to get used to the looks, but an year later I still don't like the overall change in looks. - As the tires are pushed out, it seems that a lot more road debris is being sent by the tires hitting the sides of the rear bumper, which is getting some nasty marks. These are going to Craigslist.
Installation Time: Less than 1 Hour
March 13, 2018
Review from 2010 GT500 Style Black Machined Wheel - 18x10 - Rear Only (05-14 All)
New Look for the Tang !
I'm very pleased to inform everyone that these Wheels really set a New and Owesome look too my GT 5.0
Installation Time: Less than 1 Hour
February 17, 2018
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
Good
Look good. Great for winter rims. Worth the money. Kinda a pain to clean though
Installation Time: Less than 1 Hour
February 09, 2018
Review from 2010 GT500 Style Black Machined Wheel - 18x10 - Rear Only (05-14 All)
2010 GT500 Wheels
These wheels look amazing, but I'd recommend that your car be lowered before you put them on. Otherwise, fantastic look!
Installation Time: Less than 1 Hour
February 06, 2018
Review from 2010 GT500 Style Black Machined Wheel - 18x10 - Rear Only (05-14 All)
Wheels are great, but ....
The look of the wheels is stellar. Unfortunately the packing could be better as one of my wheels suffered a gouge during shipping. The mounting and balancing done by AM was also sub par as I had to have all 4 re-balanced.
Installation Time: Less than 1 Hour
October 06, 2017
Review from 2010 GT500 Style Black Machined Wheel - 18x10 - Rear Only (05-14 All)
Gorgeous!
They look great! I got the short black acorns lug nuts and they blend in and let the wheels get all the attention.
Installation Time: Afternoon
August 24, 2017
Review from 2010 GT500 Style Black Machined Wheel - 18x10 - Rear Only (05-14 All)
A Must Have!
These rims are a Must have for any Mustang fan that is looking to add a hint of black to their wheels but still keep the chrome accents. They arrived very fast and were flawless! These wheels give a very aggressive look to your beloved pony and are actually fairly easy to keep clean. I couldn't have asked for a better delivery from AM! Thank you!
Installation Time: Shop Install
Installation Cost: 0-$100
August 24, 2017
Review from Staggered 2010 GT500 Style Black Machined Wheel & Sumitomo Tire Kit - 18x9/10 (05-14 All)
My latest purchase!
Now my Stang really pops!!!!!! Looks awesome with my 2011 race red GT/CS. There is a lot of bang for the buck with these wheels. Viper
Installation Time: Shop Install
Installation Cost: 0-$100
August 08, 2017
Review from 2010 GT500 Style Black Machined Wheel - 18x10 - Rear Only (05-14 All)
2010 gt500 wheels
Great fit! Car looks great with them.. lots of compliments
June 12, 2017
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
GT 500 Black machined wheels
I have a redfire 2006 GT. The car had OE aluminum 5 spoke wheels. Don't get me wrong the car looked great. I contemplated for over two weeks on which wheels to buy. I went round and round between chrome bullitts, anthracite bullitts, chrome GT 500 and the machined GT 500. I finally settled on the black machinesdGT 500 wheels. Without a doubt I made the right decision. I get complements everyday about how good my car looks. If you're on the fence. Get down and make the purchase. You won't regret it.
Installation Time: Less than 1 Hour
May 20, 2017
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
Awesome transformation
I was wanting something Different more aggressive and that's exactly what I got with these couldn't be more satisfied
May 04, 2017
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
AM service is the best-the wheels not so much
I loved these wheels when they arrived last June. I ordered a staggered set up, with 18X9 in the front and 18X10 in the rear. My black Mustang NEEDS these wheels! They absolutely transform the look of the car. I wrapped them with summer only performance tires and put them in storage come October. I pulled them out this spring, and the machine faces were all pitted. They look bad, but worse than that, you can't even try to polish them up, because they are not polished- they are machined. Once the aluminum starts to pit, there's nothing you can do. AM offers a 1 year warranty on the finish, which they honored- took really good care of me. But- the new 18X9 wheels have a different center cap than last year's wheels, and different than the 18X10's. Be aware- if you order a staggered set up like I did, you'll have to order a set of center caps too, if you want them to match. Again, AM took care of me, and sent me a pair of center caps to match. BUT... when the tire shop installed them with the set of 3/4" lug nuts I ordered for my old set, they did not fit on my car! Apparently, the new 18X9 wheels aren't as thick as last year's model, meaning the lugs bottomed out against the end of the wheel stud before they seated against the face of the rim. The techs at the tire shop compared the 2 wheels and confirmed- where the lug nuts seat against the face of the wheel, the metal is thinner on the new ones, so the lugs never come into contact with the face of the rim. The fix? Techs at the tire shop cut 1/4" off the end of my wheel studs so the lug nuts would seat against the wheel before they bottomed out against the end of the stud. That's a big deal to me- that the shop had to cut my lug bolts shorter to make these wheels fit on my car. I give them 4 stars because they look amazing, but it took some "modding" to make them fit, and I know they are going to require constant cleaning and waxing to protect the machined faces from pitting- even in the summer.
Installation Time: Less than 1 Hour
April 16, 2017
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
amazing wheels, great price
Ordered them this winter and i have been waiting months to install them... I got to say i am very statisfied! They meet all my expectations and are better looking than a lot of the more expensive wheels set i see on other cars.
October 12, 2016
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
Mustangv6
These wheels are the best ones for my mustang I just love it more with this new wheels.
October 10, 2016
Review from 2010 GT500 Style Black Machined Wheel - 18x10 - Rear Only (05-14 All)
Perfect look
These wheels look amazing and fit great. But don't forget to order lug nuts with them.
August 30, 2016
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
Limegreenmachine
Bought the tire and wheel combo for my 05 (see separate rating for tires). These wheels are great, just enough bright work with the black background. They look huge and mean. A smaller size would look good on my 69 ragtop.
June 08, 2016
Review from 2010 GT500 Style Black Machined Wheel - 18x10 - Rear Only (05-14 All)
Great wheel
I bought 2 of these to mount drag radials on so that the wheels matched my fronts
Installation Time: Less than 1 Hour
June 06, 2016
Review from 2010 GT500 Style Black Machined Wheel - 18x9 (05-14 All)
Great Looking Wheel
I really like how these wheels make my black on black 2005 Mustang look. The only drawback for me is the noticeable water spots on the black finish of the wheels. This wasn't a problem with my previous chrome rims.