Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Bushwacker Pocket Style Fender Flares - Set of 4 (10-14 Raptor)

Market Price $564.99 You Save 12% ($65.00)
Starting At

$499.99 (set of 4)

FREE Shipping
  • Item T528112
  • MPN# 20938-02

Will this fit your F-150?

Features, Video & Details

  • OE Matte Black
  • 3.5 Inches of Coverage
  • 100% UV Protected
  • Dura-Flex® 2000 Construction
  • Made in the USA
  • Limited Lifetime Warranty
  • Fits 2010-2014 Ford F-150 Raptor Models

Review & Installation Video

Review & Install Video

Hey, everybody. I'm Justin with the AmericanMuscle.com, and this is my detailed review of the Bushwacker Pocket Style flare set available for your 2010-2014 Raptor. This detailed review is gonna cover what you're gonna expect with the Bushwacker flares in regards to construction materials, what they're gonna offer when installed as far as functionality and appearance, and then finally what it takes to get them installed onto your Raptor. And one of the nice things about the Bushwacker options here is that they do install without the need for any drilling or cutting, so expect a very strong one out of three wrenches on my difficulty meter. There are a few steps involved, but again, you should be able to accomplish this one in your garage or driveway without issue. And I'm gonna have a little bit more detail coming up later on. The Pocket Style flares from Bushwacker should appeal to the Raptor owners out there looking for a little bit more coverage compared to your factory flares and maybe a little bit more of an aggressive styling thanks to the included hardware and rivets. Now, these are gonna be one of your pricier options here in the site in regards to aftermarket fenders, but again, they will install with no drilling whatsoever, and they are gonna work with both factory and aftermarket bumpers. Now, Bushwacker is definitely one of the leaders when it comes to producing aftermarket flares and accessories for a wide variety of applications but mainly with the focus on the truck and jeep aftermarket. Their flares range from everything from stock OE Style flares to crazy big and over-the-top flares, kind of like what we have here, and everything in between. Now, I don't have to tell you guys this but the factory Raptor is a pretty tough-looking rig in stock form. The factory flares seem to do a good enough job in the looks and functionality department for most owners out there. However, like anything in the truck and car aftermarket, owners are oftentimes not satisfied with the factory parts, maybe looking for a little bit more appearance, a little bit more functionality over those factory parts, so they start changing things out. The Bushwacker Pocket Style flares here are a perfect example of this. Not only are you gonna toughen up the look of your truck by adding the Pocket Style flares here from Bushwacker, but you're also adding a little bit more coverage for those stock or aftermarket wheel and tire packages. For the front, you're gonna be looking at three and a quarter inches of coverage from the body line to the outside of the fender. And for the rear, you're looking at three and a half inches of body line or coverage for the rear wheels and tires. As far as total height for the fender flares, you're looking at five and a half inches for both front and rear options. So again, this is a lot of extra coverage you're getting for the side of the truck, protect it from rocks, mud, whatever debris you might encounter on or off road. As far as construction, you're gonna be looking at a Dura-Flex 2000 material here that Bushwacker does utilize for their Pocket Style flares, and essentially this is going to be an ABS compound. So it's gonna hold a lot of abuse or handle a lot of abuse without really showing it. This is really important if you enjoy your Raptor taking it off road, riding some trails, hitting some mud pits, as it will stand up to some abuse here. But if you do run into any issues, Bushwacker does have your back with a limited lifetime warranty. The Dura-Flex 2000 material is kind of giving off this matte black appearance, which I think looks really good. It is finished off in a UV-resisting coating to help resist any fading over the years or chalking as it's sometimes called. However, this material is easily paintable, so if you're not a big fan of the contrast that these are gonna offer, you can totally have these things body matched to your ride. It might give off a totally different look. Staying with the appearance a little bit more here guys, you'll notice the Pocket flares do include the hardware or rivets to be used with this particular style of fender flare. Some of you guys might be into this look, others not so much. I will say the fender flares do look right at home on a Raptor, definitely adds a more aggressive appearance overall to the already wide, already imposing truck. Now, that added size, coverage and appearance does come at a cost as these particular fender flares are gonna set you back roughly 500 bucks, which does fall in line with the rest of the Bushwacker options for other trucks. But I will say they're not hitting you with the Raptor tax like I have seen with other products before. Switching gears, let's talk about installing. Again, like I mentioned at the very top of this video, there is absolutely no drilling required to get the Pocket Style flares in place here, but there are a few steps involved. So with that said, I am gonna stick with one out of three wrenches on my difficulty meter. I'll be at a strong one out of three wrenches, and maybe a couple of hours from start to finish. As far as basic tools here guys for this install, you're gonna be looking at a socket set and wrench, a Phillips-head screwdriver, a utility knife, a plastic non-marring pry tool to help you remove those factory fender flares, and then finally a grease pencil or dry-erase marker to help you make some marks. I will say the Bushwacker does include all the hardware you need for this install along with some very detailed instructions which should help you along the way. Before you even get started with the truck itself, go ahead and install the hardware onto each fender flare using the included rivets that Bushwacker does include with the kit here. Once all four fender flares are ready to go, you can start by removing the factory fender flares on your Raptor using that non-marring pry tool. Once those are out of the way, remove the yellow clips that are in place in the fender and then go ahead and clean the area. Grab your new flares and secure them to your Raptor using the included plastic pushpin retainers and do this on all four corners. Once all four fender flares are in place, go ahead and grab the included trim and trim tool, which is a white piece of plastic, and use that to help you get the rubber trims seated between the fender flare from Bushwacker and the sheet metal of your Raptor. That's pretty much gonna wrap up your install, guys, after you nail all four corners. But again, I do wanna remind you, no drilling, no permanent modification here, so I am gonna stick the strong one out of three wrenches on my difficulty meter and overall getting all four flares in place shouldn't take you a couple of hours from start to finish. All the factory fender flares from the 2010 through 2014 Raptor do a good enough job for most owners out there. There are definitely some owners who prefer a little bit more coverage for those more aggressive wheel and tire setups, and maybe a slightly more aggressive look thanks to the included hardware. If you're the latter, then you're definitely gonna enjoy the Pocket Style flares from Bushwacker, which you can find right here at AmericanMuscle.com.

Intense Styling. Enhance your Raptor's dominating look by upgrading with Bushwacker's Pocket Style Flare Set. They feature an OE styled matte black finish and exposed stainless bolt heads that will easily complement your Raptor's grille for an intense look. These Pocket Style Flares provide 3.5 inches of coverage from your truck's wheel well sheet metal, making them perfect for covering oversized tires. They're easy to mount and can even be painted for a truly custom appearance for daily drivers and show rigs alike.

Durable Construction. These Raptor Fender Flares are proudly made in the USA from Bushwacker's very own Dura-Flex® 2000 material. They're designed for superior durability and flexibility off or on road. They're 100% UV protected to prevent fading and chalking for long lasting style and performance.

Installation. These Raptor Pocket Flares install easily with no drilling or modification. Bushwacker includes an easy to follow instruction guide and a Torx bit for a simple and straightforward upgrade.

Lifetime Limited Warranty. To ensure quality craftsmanship Bushwacker backs these Pocket Style Flares with a Lifetime Limited Warranty. Some exclusions may apply, please seek manufacturer's warranty for details and specifics.

Application. This set of four Bushwacker Pocket Style Fender Flares is specifically designed to fit 2010 to 2014 Ford F-150 SVT Raptor models.

Fitment: 2010 2011 2012 2013 2014 Details

What's in the Box
  • (2) Front Fender Flares
  • (2) Rear Fender Flares
  • (1) Torx Bit
  • (1) Trim Tool
  • Edge Trim
  • Hardware
Installation Info
Will it fit my F-150?

Most Helpful Reviews

5/5
Raptor Bushwacker fenders flares

Well worth every penny spent. Protects the side from mud and rocks getting flung up better then the stock fender flares. These are the fender flares that SVT should have installed to begin with. I've had ...

Read More
Helpful (1)

5/5
AWESOME!!! BUY THEM NOW!!!

These flares fit the truck perfectly. They hug the truck tight and are very solid. Ford should have had these come stock on the Raptor! They provide a lot more coverage and add and aggressive look to ...

Read More
Helpful (0)

Overall Rating 4 out of 5 stars
Read All 3 Reviews

Customer Photos (2) Submit Your Photo

View All 2 Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (3) Write a Review

Overall Rating 4.0

out of 5 stars

Installation Time:Afternoon

  • Fit 3.666667 3.7
  • Appearance 5 5
  • Bang For Your Buck 4 4



  • 5/5

    Installation Time: Afternoon

    March 16, 2017

    Raptor Bushwacker fenders flares

    Well worth every penny spent. Protects the side from mud and rocks getting flung up better then the stock fender flares. These are the fender flares that SVT should have installed to begin with. I've had them on for about a month and they've already protected the side of my truck from a lot.

    kgbrls

    Year: 2012 Submodel: 6.2L V8 Raptor SVT Raptor

    Helpful (1)

  • 2/5

    Installation Time: Afternoon

    April 29, 2017

    Look Good...but...

    Mainly purchased to pass inspection in my state. only offers 1 inch of coverage over OEM. Not nearly enough! Fit was terrible. Buy cheaper ones, they might fit better. There are better options out there for wide tires.

    davidh

    Year: 2011 Submodel: 6.2L V8 Raptor SVT Raptor

    Helpful (0)

  • 5/5

    Installation Time: Afternoon

    April 14, 2017

    AWESOME!!! BUY THEM NOW!!!

    These flares fit the truck perfectly. They hug the truck tight and are very solid. Ford should have had these come stock on the Raptor! They provide a lot more coverage and add and aggressive look to the truck. Overall the install was pretty easy but it was time consuming with all the prep before you even get started. It took just under 4 hours to get all four of them on. I would suggest having someone there to help. These flares are big and really hard to keep in place while you are putting in all the push pins. I would 100 absolutely recommend these fender flares to any Raptor owner.

    whitemamba

    Year: 2012 Submodel: 6.2L V8 Raptor SVT Raptor

    Helpful (0)

Related F-150 Categories