Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

OPR EGR Valve (99-04 V6)

Item 100971
AmericanMuscle no longer carries the OPR EGR Valve (99-04 V6). Please check out 1999-2004 Mustang Valves, Sensors and Sending Units for an updated selection.
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P

Features & Details

  • Direct Fit Replacement
  • Regain Lost Power
  • Gasket Included
  • Ford Motor Company Equivalent Part# XL3Z9D475BA
  • Fits 1999-2004 V6 Mustangs
Improve Performance. Is your V6 Mustang suffering from poor acceleration, rough idle, or failing emissions testing? Then you may need to replace your old stock EGR Valve with a brand new direct fit replacement from OPR.

Reduce Emissions. An EGR (Exhaust Gas Recirculation) Valve recirculates a portion of your exhaust gases back into your engines combustion chamber to more efficiently and completely burn the fuel to reduce your Mustangs toxic emissions.

Application. This OPR EGR Valve is a direct fit replacement for the 1999 to 2004 V6 Ford Mustangs equipped with either the 3.8L or 3.9L V6 engine. Gasket is included.

OPR

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) EGR Valve
  • (1) Gasket
Installation Info
Tech Specs
Will it fit my Mustang?

    Customer Photos (2) Submit Your Photo

    View All 2 Photos

      Questions & Answers (1)

      1 Top Rated Question

      What tools are needed to remove the EGR valve?

      • You should only need a pair of pliers with a simple socket and wrench set to fully replace the EGR Valve.

      Helpful (0)
      Post Your Question

        Customer Reviews (17) Write a Review

        Overall Rating 4.8

        out of 5 stars




        • 5/5

          September 05, 2018

          Easy to do

          This is an easy replacement. Once you get the bolts and hose nut to let go. Make sure you have some WD40 to use. Otherwise it was very easy to do.

          Kabar

          Year: 2003 Submodel: V6

          Helpful (6)

        • 4/5

          March 15, 2018

          EGR Valve '01 V6

          Fit was a little snug on one of the bolts, so easing both bolts at the same was what I had to do. 5 minute install otherwise and smooths out the motor, got rid of a rough idle when semi-warm. The rough idle was intermittent so I wasn't sure if I should really replace this, but I'm glad I did! Replaced at 190,000 miles, but you'd never know it.

          PrestonG

          Year: 2001 Submodel: V6

          Helpful (11)

        • 5/5

          July 03, 2017

          Great replacement

          Great replacement for the old broken one I had and stop that annoying valve knocking that kept coming from the engine

          Gerardo

          Year: 1999 Submodel: V6

          Helpful (10)

        • 5/5

          March 27, 2017

          Same fit and finish as OEM part

          Quick delivery, perfect OEM fit. A must for getting your EGR system operating efficiently . Install time 10 minutes.

          KROD99

          Year: 1999 Submodel: V6

          Helpful (11)

        • 5/5

          March 09, 2017

          Recommend

          Clean and functional..................................................................................../..........

          Chris

          Year: 2001 Submodel: V6

          Helpful (13)

        • 4/5

          January 03, 2017

          Great part.

          Works wonderful! Breaths like a new pony! Only downfall isnt the part itself its ford's bolts. Shredded one off taking it out. Use some decent penetrating oil and you should be fine

          04SmurfStang

          Year: 2004 Submodel: V6

          Helpful (11)

        • 5/5

          August 22, 2016

          Recommend

          Great product and cheaper than any other place I look for it

          Juan93

          Year: 2001 Submodel: V6

          Helpful (11)

        • 4/5

          February 11, 2016

          Straightforward, easy to install. Recommend

          My mustang just hit 88,888 miles and was having some issues with running lean. Checked for vacuum leaks, fuel injectors and fuel pump were good. Turns out it was this bad boy. Very easy to install, took about 5 mins. If you have a high mileage motor there is likely more carbon buildup in your EGR than you expect. After I swapped this one in, no more lean codes. Car's idle has been more steady overall as well. My only complaint is that is has Made In China printed on the top of it, but what doesn't these days.

          Zw15091

          Year: 2004 Submodel: V6 Salisbury, MD

          Helpful (12)

        • 5/5

          September 24, 2015

          Erg Valve 99-04 Ford Mustang

          Error code P0401 was a pain to fix when I got the Service Engine Soon light, however once I bought this part in order to replace my old broken egr valve it not only erased error code P0401, but it made my Mustang run extremely well. I highly gurantee this part to all Mustang owners.

          AlexAzdar

          Year: 2001 Submodel: V6 Hayward, CA

          Helpful (12)

        • 5/5

          September 26, 2014

          EGR Valve

          The EGR Valve bolted up perfect & easily! Highly-rated!

          Dleiker2000

          Year: 2000 Submodel: V6 West Hills, Los Angeles, CA, USA

          Helpful (12)

        • 5/5

          August 24, 2014

          Exact fit!!

          Part came in quickly and only took a couple of minuets to install and fixed the rough idle and poor gas mileage I had been dealing with, along with the bad valve of course.

          Tanner19

          Year: 1999 Submodel: V6 Colorado Springs, CO, USA

          Helpful (11)

        • 4/5

          July 24, 2014

          Quick fix

          This product was easy to install after I got the old lock nut to break free it was smooth sailing from there. It does the job thanks am

          Aaron30

          Year: 2002 Submodel: V6 Everett, WA

          Helpful (11)

        • 5/5

          May 10, 2014

          EGR Valve

          Valve arrived on time and undamaged although it was loose in carton. Installation was made by owner in a matter of several minutes. Noticed improved engine performance immediately.

          Al75

          Year: 2002 Submodel: V6 Vancouver, BC, Canada

          Helpful (10)

        • 5/5

          April 13, 2014

          Good Quality Replacement

          There aren't really any performance gains, but it does look a lot better under the hood. Fits great and takes about 10 minutes to install. A great choice if you need to replace your EGR valve.

          PRoss

          Year: 2004 Submodel: V6 Springdale, AR, USA

          Helpful (10)

        • 5/5

          March 12, 2014

          Pleasant surprise

          I have a 2001 V6, so my old EGR valve was rusted and rust was beginning to spread. I read that it might give you some lost power, and i read right. Took me ten minutes to install, took it around the block and to my surprise, acceleration was smoother and my car was a bit faster. worth it!

          Susheelover

          Year: 2001 Submodel: V6 Smyrna, GA, USA

          Helpful (9)

        • 5/5

          February 21, 2014

          EGR Valve (99-04 V6)

          Easy, inexpensive, and perfect fit. After swapping out the factory valve unit for this new one, it brought some life back into the engine. Worth the repair if you still have the old factory EGR valve installed.

          apothicjer

          Year: 2003 Submodel: V6

          Helpful (10)

        • 5/5

          February 03, 2014

          Nice product

          Perfect fit look great under the hood, i recomanded this product for remplacement OEM stock valve.

          mustaddic

          Year: 2001 Submodel: V6 St-narcisse, QC, CA

          Helpful (8)

        Related Mustang Categories