Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

Ford Performance High Performance Pushrods (85-95 5.0L)

AmericanMuscle no longer carries the Ford Performance High Performance Pushrods (85-95 5.0L). Please check out 1979-1993 Foxbody Mustang Cylinder Heads & Valvetrain Components for an updated selection.

Features & Details

  • Steel Construction
  • Heat-Treated
  • Press Fit Ball Tips
  • Sold as a Set of 16
Superior Construction. These Ford Racing Pushrods are made from durable steel that is heat treated for extra strength and feature a 5/16" diameter non-tapered tube shaft with press fit 5/16" ball tips.

Application. This set of 16 Ford Racing High Performance Pushrods are specifically designed for use in a 1985-1/2 to 1995 Ford Mustang equipped with the iconic 5.0L V8 engine.

Please Note. These are production style pushrods that are not compatible with guide plates.

Fitment: 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 Details

MPN# M-6565-L302

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (16) Pushrods
Installation Info
Tech Specs
Specifications:
  • Pushrod Material - Steel
  • Tubing Diameter - 5/16" (0.312)
  • Top/Bottom Tip Style - Ball
  • Top/Bottom Tip Diameter - 5/16" (0.312)
  • Intake Length - 6.272"
  • Exhaust Length - 6.272"
  • None Tapered
  • Press fit tip
  • Heat-Treated
Will it fit my Mustang?

    Customer Photos (4) Submit Your Photo

    View All 4 Photos

      Questions & Answers (5)

      5 Top Rated Questions

      I got edelbrock performer heads,1.6 RR, and an e303 will these work with that?

      • The Ford Performance High Performance Pushrods should work with your setup, however we do recommend checking pushrod length to ensure correct fitment.

      Helpful (0)

      How long are these?

      • These will be 6.25" long.

      Helpful (0)

      Will these work with fords high performance hydraulic rollers?

      • Yes, these would work on any 85-95 5.0L even if they have aftermarket lifters installed.

      Helpful (0)

      I have a 347 stroker with gt40x heads and a frp x cam 1.6 comp cam roller rockers will 6.250 push rods work for me?

      • The Ford Performance High Performance Pushrods (85-95 5.0L) should work for your application. First, you should check PTV clearance and ensure stock length push rods work. 1.6 Rockers should work with stock length rods as long as the block was not decked for a higher compression.

      Helpful (0)

      GT40 heads? i was wondering if these will work with GT40 head set up?

      • Yes it works with GT40 iron as well as aluminum heads, and works with pedestal or stud mount rocker arms and/or use of guideplates etc. If you are using OE style bolt on pedestal rockers I would get a set of shims (Item #50310 MPN# M-6529-A302) to go with this purchase. I use these pushrods with my Comp Cams XE264-HR cam and GT40X aluminum heads with pedestal 1.7 roller rockers no problem, I had to use shims under the rockers.

      Helpful (0)
      Post Your Question

        Customer Reviews (18) Write a Review

        Overall Rating 4.9

        out of 5 stars




        • 5/5

          November 22, 2018

          pushrods

          great product exact replacement for factory parts. they work well and great cutomee service

          BerryF

          Year: 1995 Submodel: GT

          Helpful (3)

        • 5/5

          January 14, 2018

          Just what I needed

          Pushrods showed up fast and can't wait to put them in...

          rowdyrob

          Year: 1994 Submodel: Cobra

          Helpful (11)

        • 5/5

          October 13, 2017

          Excellent value

          For a basic H/C/I, these are a great value. Bought these for my GT40P update.

          DavidG

          Year: 1990 Submodel: LX

          Helpful (11)

        • 5/5

          August 16, 2017

          best bang for your buck

          when getting a new cam it a good idea to replace pushrods

          JesusR

          Year: 1989 Submodel: LX

          Helpful (10)

        • 5/5

          February 23, 2017

          It worked great

          It worked great really not much to say about a pushrod it looks good easy to put in pretty simple to just actually didn't really address them just put them in and talked him down and go through all that process and go from around inground valves valves them so they want together pretty good would recommend

          TimW

          Year: 1987 Submodel: GT

          Helpful (11)

        • 5/5

          September 29, 2016

          Pushrods are strong

          They worked really good with my set up and they are holding up to my power

          Antoniotrim99

          Year: 1991 Submodel: GT

          Helpful (13)

        • 5/5

          November 07, 2015

          FRP Pushrods

          Awesome quality you can feel how much better these are over stock and even though you'll never see them they sure do look good going in thanks again AM

          JcStang97

          Year: 1992 Submodel: Other Woodstock GA

          Helpful (12)

        • 5/5

          September 24, 2015

          Ford racing pushrods.

          Perfect fitment, good looking, and affordable. What more could you ask for in a Ford Racing product?

          Spitfire81

          Year: 1990 Rio Grande, NJ

          Helpful (11)

        • 5/5

          December 21, 2013

          Awesome Choise

          I resentley perchased a Ford Racing E303 Cam and Roller Lifters. I also needed push rods so I went with the Ford Racing Push Rods Witch I am very Happy with.! My Car sounds Great at idle but when I get on it omg!,Not only do I have a lot more power but my car sounds like a Muscle Car Should. Thank You American Muscle and Thank You Ford Racing.

          Reno9450

          Year: 1994 Submodel: GT Napa Ca

          Helpful (14)

        • 5/5

          December 20, 2013

          Quality product at a great price

          Easy install,perfect fittment and a great price. And you cant beat delivery time, 2days!

          Mikes07

          Year: 1992 Submodel: GT Hartford, CT, USA

          Helpful (11)

        • 5/5

          November 23, 2013

          Great product.

          Was installing gt40p's and these pushrods fit perfect.

          Sapierce90

          Year: 1987 Submodel: GT Oklahoma

          Helpful (12)

        • 5/5

          August 26, 2013

          High quality part.

          These are very high quality push rods and I have no worrys about using them in an engine build.

          Homerbs

          Year: 1995 Submodel: GT Locke, NY 13092, USA

          Helpful (11)

        • 5/5

          July 20, 2013

          My Performance Pushrods

          I installed these pushrods when I installed my F303 Cam also from AM and trust me, they work just fine. I guess you can say I broke them in real good lol. Don't hesitate, get them now...

          PATRICK95GT

          Year: 1995 Submodel: GT Kissimmee, FL

          Helpful (11)

        • 5/5

          March 22, 2013

          Perfect fit

          These pushrods had a great price attached to them and they are great quality made perfect for engine rebuild.

          trevor50smith

          Year: 1990 Submodel: GT Fairfield, CA, USA

          Helpful (10)

        • 4/5

          February 15, 2013

          So far so good! nice packaging, rust protection paper!

          Using them in my 347 stroker w/AFR 165cc! There doing there job! Engine runs great.

          Diponu420

          Year: 1990 Submodel: Other Salinas, CA, USA

          Helpful (11)

        • 5/5

          April 30, 2012

          ford racing push rods

          They arrived on time and look great. Very happy with the performance of them.

          tj25n1

          Year: 1988 Submodel: GT Bunker Hill, IL 62014, USA

          Helpful (11)

        • 5/5

          March 31, 2011

          great Replacement Product

          this is a great replacement if you're rebuilding you top end of the Engine, make sure you double check your push rod lengths to prevent any valves from being held open or not opening or closing properly

          Robert

          Year: 1986 Submodel: GT

          Helpful (12)

        • 5/5

          December 08, 2010

          Great Product!

          i say definitely buy these push rods if you are still thinking, because they are twice as stronger than stock and they're the same length. just remember to prime the motor before you reassemble the motor. Thanks American Muscle!

          Robert

          Helpful (14)

        Related Mustang Categories