Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

Ford Performance BOSS 302S Brake Ducts (2013 BOSS 302)

AmericanMuscle no longer carries the Ford Performance BOSS 302S Brake Ducts (2013 BOSS 302). Please check out 2010-2014 Mustang Brake Accessories for an updated selection.

Features & Details

  • Original Equipment on Boss 302 Race Car
  • Improves Braking Performance
  • Thermoformed ABS Plastic
  • Fits 2013 BOSS 302 Mustang Front Fascia
Boss Race Car Original Equipment. Originally designed for the extreme demands of the 2013 BOSS 302 race car these Ford Racing Upgrade Brake Ducts are a must for all track or serious performance enthusiast.

Improves Braking Performance. Designed to rivet in from behind the front fascia, these Ford Racing BOSS 302S Brake Ducts replace the smaller ducts to allow more air to flow across your brakes. These larger brake ducts are the perfect upgrade to the Boss 302 Brake Duct Kit.

Legendary Ford Racing Quality. When you're adding performance parts to your Pony, you can't go wrong by installing parts from the folks that know it best. These brake ducts are thermoformed from ABS plastic to ensure a perfect fit and years of hassle-free use.

Application. These BOSS 302S Replacement Brake Ducts are designed for use on the 2013 BOSS 302 Mustang in combination with the Boss 302 Brake Duct Kit.

Fitment: 2013 Details

MPN# M-2004-MR

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) Passenger side brake duct bezel
  • (1) Driver side brake duct bezel
Installation Info
Tech Specs
Will it fit my Mustang?

    Customer Photos

      Questions & Answers (4)

      4 Top Rated Questions

      The boss 302 bumper has the same opening as the standard gt/v6 bumper. Based on what I can see, does the diameter of this duct still fit the 13-14 gt/v6 opening on either side of the lower grille? I understand it may not have the same mounting hardware on the back side, just wanting to know if the if the size is correct?

      • The Ford Performance BOSS 302S Brake Ducts is only designed to work with the 2013 BOSS 302. The size is slightly different which can cause it not to fit with any other models.

      Helpful (0)

      I have a 13 Boss Laguna Seca with the factory Brake Ducts Question do you have to cut the factory tabs on the bumper facia that holds the factory air duct bezels in place in order to install these 302S ducts.

      • The Ford Performance BOSS 302S Brake Ducts will not require any trimming if you have a factory Boss 302 bumper cover, these will be a direct fit.

      Helpful (0)

      What diameter brake duct hose work with these?

      • The diameter of the brake duct hoses would be 3" which will allow it to plug right up to the duct.

      Helpful (0)

      Will these fit on a 2013 GT ? My GT is equipt with the Track Package so it has many Boss parts on it ...including the Brembos. I plan on purchasing the Boss 302 brake duct kit also.

      • If you install a 2013 Boss bumper cover then these should be able to mount up, they will not however mount to a 2013 GT bumper cover.

      Helpful (0) Show 1 more answer
      Post Your Question

        Customer Reviews (2) Write a Review

        Overall Rating 4.5

        out of 5 stars




        • 5/5

          November 09, 2017

          Part is oem as expected

          Very strong and light weight part. Perfectly formed.

          SteveK

          Year: 2014 Submodel: GT

          Helpful (15)

        • 4/5

          May 04, 2016

          Significant improvement

          I'm really impressed with these brake duct inlets. These inlets allow a greater volume of air to flow over the front rotors via the laguna seca brake duct kit to which they are mounted. I have confirmed they do work by measuring the front rotors with an infrared thermometer before and after the inlet install. After high performance driving the front rotors showed average cooler temperatures under similar conditions. Build quality is pretty good, the plastic is rigid and strong. However there is a small collar that reinforces the area where the hose attaches to the inlet, this collar doesn't look like it's well mounted to the inlet. The collar looks more like an after thought. In the end it's a good improvement if reliable brakes are a must. Awfully expensive for what they are though. Four stars!

          DarthDuggan

          Year: 2013 Submodel: Boss

          Helpful (19)

        Related Mustang Categories