Free Shipping On Orders Over $75. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$5,000 Up for Grabs! Enter to Win >

Ford Performance Naturally Aspirated Cobra Jet Engine

Item 50359
AmericanMuscle no longer carries the Ford Performance Naturally Aspirated Cobra Jet Engine. Please check out 2015-2021 Mustang Crate Engines and Blocks for an updated selection.
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Q&A, Specs & Installation

    Features

    • Ready to race right out of the box
    • Natuarally aspirated
    • 5.0L Ti-VCT aluminum block
    • 12.5:1 compression ratio
    • Super Cobra Jet mono blade electronic throttle body
    • Boss 302 CNC ported cylinder heads
    • Electronic control module with Cobra Jet calibration

    Description

    Race Ready! Proven Performance Out of the Box! The 2013 5.0L Ti-VCT Cobra Jet natuarally aspirated engine kit comes fully dressed just like the production engines used in the Cobra Jet race car. This engine is hand-assembled on Ford Racing's low volume production line and is built to be used in any 2013 Cobra Jet project competing in NHRA's B/Stock class.

    Built Ford Tough. This Ford Racing crate engine is built from a lightweight aluminum cylinder block that features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength. Assembled with a precision balanced forged crankshaft, Mahle forged graphal coated pistons and forged H-beam Manley connecting rods that feature Ford GT leaded rod bearings for improved strength, this Coyote engine includes a Ford Racing Cobra Jet intake manifold, a Super Cobra Jet mono blade electronic throttle body and a 123mm MAF housing and air filter.

    Additional Features. The Natuarally Aspirated Cobra Jet crate engine also features Boss 302 CNC ported cylinder heads, Boss 302 intake and exhaust cams, 12 qt oil pan with forged steel gerotor oil pump, Aeromotive fuel rails and fuel lines, as well as electronic control module with Cobra Jet calibration.

    Application. This Ford Racing Natuarally Aspirated Cobra Jet Engine is designed to be used in any 2013 Cobra Jet project competing in NHRA's B/Stock class.

    Technical Note. Does not include engine wiring install kit part# M-6017-A504V.

    NOTE: Ships Continental 48 States ONLY. No Canada, APO/FPO, Hawaii, Alaska, Puerto Rico, Guam or Us Virgin Islands.

    If shipping to a business, please include the business name. Also, after your order is placed, be prepared to let us know if you will need a Lift-Gate service. You will be contacted via email before your order ships.

    Fitment:

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Engine

    Tech Specs

    • 5.0L Ti-VCT aluminum block
    • Precision balanced forged crankshaft with ATI SFI approved damper
    • Boss 302 leaded main bearings
    • Forged H-beam Manley connecting rods with Ford GT leaded rod bearings
    • Mahle forged graphal coated pistons.12.5:1 compression ratio with file fit piston rings
    • Boss 302 CNC ported cylinder heads M-6049-M50BR, M-6050-M50BR
    • Boss 4 layer head gaskets with 12 mm head bolts M-6067-M50BR
    • Ford Racing Boss 302 intake and exhaust cams
    • Ford Racing 12 qt oil pan M-6675-M50BR with forged steel gerotor oil pump
    • Aeromotive fuel rails and fuel lines
    • Ford Racing Cobra Jet intake manifold with M-9600-CJ 123mm MAF housing and air filter
    • Super Cobra Jet mono blade electronic throttle body M-9926-SCJ
    • Improved wiring and crank position sensor system for increased rpm capability
    • Provision for brake vacuum and PCV valve is deleted
    • Underdrive alternator pulley
    • Electronic control module with Cobra Jet calibration

    Questions & Answers

    10 More Questions

        Related Mustang Categories