Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

Ford Performance Intake Manifold Gaskets for Z Heads (79-95 5.0L)

Item 50358
AmericanMuscle no longer carries the Ford Performance Intake Manifold Gaskets for Z Heads (79-95 5.0L). Please check out Mustang Gaskets & Seals for an updated selection.

Features & Details

  • Designed for "Z" Cylinder Heads - M-6049-Z304P
  • Genuine Ford Racing Part
  • Sold as a Pair
  • Fits 1979-1995 5.0L Mustangs
Leak Free Performance. When installing a set of Ford Racing high flow "Z" cylinder heads on your 5.0L Mustang you will need these specific Ford Racing gaskets to prevent leaks and to ensure a proper seal.

Legendary Ford Racing Quality. When you're adding performance parts to your Pony, you can't go wrong by installing parts from the folks that know it best. Ford Racing's legendary quality ensures a perfect fit and years of hassle-free use.

Application. This set of two Ford Racing Intake Manifold Gaskets are specifically designed for use on 1979-1995 Mustangs equipped with high flow "Z" cylinder heads (ford part# M-6049-Z304P) only, including the LX 5.0, GT and SVT Cobra. Technical Note. Fits most single plane intake manifolds, but needs to be checked for port alignment and for adequate sealing surface.

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (2) Gaskets
Installation Info
Tech Specs
Will it fit my Mustang?
  • Cobra - 93, 94, 95
  • Cobra R - 93, 95
  • GT - 87, 88, 89, 90, 91, 92, 93, 94, 95
  • LX - 87, 88, 89, 90, 91, 92, 93
  • Other - 79, 80, 81, 82, 83, 84, 85, 86

For use with "Z" cylinder heads only - M-6049-Z304P

    Customer Photos

      Q & A

      No questions about this product yet.

      Ask the First Question

        Customer Reviews (2) Write a Review

        Overall Rating 5

        out of 5 stars




        • 5/5

          September 14, 2019

          Top notch

          Fitment was great especially for those of us with a mild port job. Should seal for a long time to come

          Skrappy

          Year: 1994 Submodel: Cobra

          Helpful (0)

        • 5/5

          December 23, 2012

          z head intake gaskets

          tried felpro and ford boss gaskets and didn't work. the z head intake gasket is the right gasket. i have the svo heads and all i had to do was trim a 1/8" off the top of the gaskets and they fit perfect.they give you more coverage between water ports and intake port. this engine is a 347 stroker

          knobby

          Year: 1990 Submodel: GT York, PA, USA

          Helpful (15)

        Related Mustang Categories