Win $5,000 For Your F-150! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Injen Evolution Cold Air Intake (10-14 6.2L Raptor)

Market Price $383.99 You Save 17% ($63.64)
Starting At

$320.35 (each)

FREE Shipping
  • Item T527891
  • MPN# EVO9101

Will this fit your F-150?

Features & Details

  • Improves Airflow for More Power
  • Evolution Series Air Induction System
  • SuperNano-Web Dryflow Air Filter
  • Built-in Filter Minder
  • No Computer Tune Required
  • Simple Bolt-On Installation
  • Designed and Manufactured in the USA
  • Fits All 2010-2014 6.2L Raptors
Boost Power and Performance. There is no doubt the 6.2L Raptor is one of the baddest trucks to roll down the road. If you feel your Raptor is lacking in acceleration to pass the slower traffic or getting off the line when the light turns green, consider adding the Injen's Evolution Cold Air Intake to your rig. Injen designed this black enclosed polyethylene cold air induction system to completely replace your factory air box and paper filter element. The free-flowing airbox, intake tube and massive high flow SuperNano-Web Dry Filter maximizes your airflow to provide an increase up to 15 horsepower and 16 ft-lb of torque to the rear wheels, all while providing superior filtration.

No Tune Required. Unlike other Cold Air Intakes on the market for the 6.2L Raptors, the Injen Evolution CAI does not require a computer re-tune. The engineers at Injen designed, tuned, and dyno-tested this Cold Air Intake to improve your Raptor's power using the stock tune.

Reusable Dry Air Filter. Injen SuperNano-Web Dry Air Filters are made from an oil-free, synthetic filter media for outstanding air flow, filtration and performance. They are re-usable and can be easily cleaned by using compressed air or a common house-hold vacuum cleaner. For best results, the SuperNano-Web Filter should be serviced every 10,000 to 20,000 miles (depending on driving conditions).

Built-in Filter Minder. One of the unique feature of this Evolution Cold Air Intake is the Built-in Filter Minder. With a quick glance of the dial, you'll now when your air filter is in need of maintenance, without having to disassemble the housing.

Made in the USA. Proudly manufactured in the USA, this Cold Air Intake is constructed from roto-molded cross-linked polyethylene for excellent durability and heat insulation. Injen designed this Cold Air Intake to provide smooth unrestricted airflow.

Straight Forward Installation. The Injen Evolution Cold Air Intake Kit is designed to install easily with just basic hand tools. No extra modifications or special tools are required for proper installation. All necessary parts and instructions are included.

Recommended Upgrade. Even though a re-tune is not required for operation, AmericanMuscle recommends a custom tune with a F-150 Handheld Tuner. It would reprogram the vehicles computer (ECU) to get the best performance possible out of this cold air intake.

Application. This Injen Evolution Cold Air Intake System is specifically designed to fit the 2010 to 2014 SVT Raptors, equipped with the 6.2L V8 engine. The intake does not require re-tuning the vehicles computer for operation.

Technical Note. This Injen Cold Air Intake is not legal for use in California or other states adopting California emission standards.

Fitment: 2010 2011 2012 2013 2014 Details

What's in the Box
  • (1) Cold Air Intake
  • Hardware
Installation Info
Will it fit my F-150?

Most Helpful Reviews

5/5
Great

Install was easy. Instructions left out a few small things.

Helpful (1)

3/5
Not all expected

The product fit perfect, except for the four screws to connect the upper box to the lower box of air intake. The screws bottomed out and I still had a quarter inch of gap. Had to add 3 small washers to ...

Read More
Helpful (1)

Overall Rating 4 out of 5 stars
Read All 2 Reviews

Customer Photos (1) Submit Your Photo

View 1 Photo

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (2) Write a Review

Overall Rating 4.0

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 3.5 3.5
  • Fit 4.5 4.5



  • 3/5

    Installation Time: Less than 1 Hour

    June 11, 2016

    Not all expected

    The product fit perfect, except for the four screws to connect the upper box to the lower box of air intake. The screws bottomed out and I still had a quarter inch of gap. Had to add 3 small washers to each of the screws to get it flush. Then noticed the top and bottom seemed slightly warped and not even. (Top and bottom of box). Sad since they boast "Made in America"! Honestly, I don't see the big deal! The stock and the Injen are almost the same thing with exception of the gauge for the filter. Little more of an opening to suck in more air. It's nice! It fit to the truck very well, I just don't think it was worth $330 when all said and done. Little less money and it would have been worth the it. Guess I could have stuck with the stock. Very nice looking, just could have used the money for something else more needed on the truck. Hope you have better luck.

    Zuel1

    Year: 2013 Submodel: SVT Raptor

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    May 13, 2016

    Great

    Install was easy. Instructions left out a few small things.

    Jay

    Year: 2010 Submodel: SVT Raptor

    Helpful (1)

Related F-150 Categories