(approx) 1 Hour
Simple installation for anyone.
$299.00 (kit)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Increased Horsepower and Torque. Give your Dodge Challenger with a 6.4L HEMI engine a performance boost with this JLT Performance Series 2 Cold Air Intake. What sets this intake apart from the others is the Roto-molded, ABS plastic construction. The opening is 5 inches wide for maximum airflow, while the plastic tube helps keep the intake charge nice and cool. This improved airflow provides a noticeable increase in throttle response as well as an incredible gain of up to 15 HP and TQ enough to push you back onto your seat while you roar through any city street or track.
No Tuning Needed. Thanks to the dedicated engineers at JLT, this Performance Series 2 Cold Air Intake can work in your Dodge Challenger using factory tuning. If you want to experience the most out of this intake, then a custom re-tune is recommended.
S&B Powerstack Air Filter. This JLT Performance Series 2 Cold Air Intake uses a state-of-the-art S&B Powerstarck Air Filter. This filter features an inverted cone design, which maximizes airflow while providing a high level of filtration. With this filter, you don’t have to worry about those nasty power-robbing particulates. And best of all, it's completely washable and reusable.
ABS-Plastic Construction. At the core of this JLT Performance Series 2 Cold Air Intake is a Roto-Molded ABS plastic construction. The specially designed ABS plastic effectively insulates against the warm air in the engine bay so that no heat passes through the intake. The kit also comes with a Roto-Molded Heat shield designed to keep your engine cool during idle and low cruising speeds. Topping of this assembly is a textured black, powder-coated finish for additional protection from the elements.
Hassle-Free Installation. Installing this JLT Performance Series 2 Cold Air Intake requires only simple hand tools. The process is completely bolt-on and no drilling is needed.
Covered by a 1-Year Limited Warranty. Each of this JLT Performance Series 2 Cold Air Intake is covered by a 1-year limited warranty. This is to ensure the intake complies with factory standards and are free from any known defects.
Application. This JLT Performance Series 2 Cold Air Intake fits all 2011-2020 Dodge Challenger 6.4L HEMI models without Shaker Hoods.
Fitment: 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 27, 2020
2016 Challenge 392
Fit perfectly and only took 15 minutes to install. Feels like the cars got a little extra get up in 4th but it's probably just in my head. You can hear it sucking more air and sounds good.Helpful (2)
November 10, 2019
It’s great make the car way different then before make it sound different it’s sound beast now make car way faster the before it really make big difference.Helpful (1)
July 15, 2019
Cold air intake
I just installed my JLT cold air intake yesterday. I followed the instructions from you tube that was provided by JLT. Very simple installation.Helpful (1)
February 07, 2019
JLT Intake for 2019 Challenger
When I started looking for an intake replacement, JLT and another were the top two recommendations. People spoke highly of the JLT intake so I thought I would give it a try. Buying from American Muscle was pretty straight forward, they shipped out pretty fast and I got my intake pretty fast (less than a week, I’m in the southwest). I had no issues and would buy from American Muscle again. Getting the intake, it was boxed up nicely, my only issue was the filter, it’s an SandB filter which I hear requires their solution/oil to take advantage of a warranty if need be. All the parts were accounted for, the directions were nice and colorful and explained in detail the install but not making it difficult by unnecessary explanations. The install was pretty straight forward, even without the instructions. Not much to say, it took me less then 30 mins to do. Butt dyno says there’s an improvement, but I don’t put much faith into it. One of the reasons I went with JLT, it was proven gains without tuning. In time it will tell, it does amazing with the 392, at idle you can hear it suck a bunch of air in and at WOT is loud and nice. My IAT has been much of a difference I think, but it does cool down a lot faster then stock (going from idle to vehicle movement. The other I like is the intake box, it’s huge and almost enclosed, especially when compared to a KandN or another equal brand.Helpful (8)
January 17, 2019
Challenger TA fitment issue
Ok guys cut straight to it this product is awesome I will not bash it because it does work looks good sounds good and it definitely feels good when you are driving you can feel good power. My issue is it did not fit on my TA challenger the box sits high so modding is required it’s simple but you do lose the seals but as you all know the TA has a seal on the hood for the ram air so it compensates for the two rubber seals that you have to remove. That being said I give it 4 stars but not because of performance I give that a 5Helpful (6)
December 29, 2018
Really simple install directions are clear simple tools are needed and was a noticable difference.Helpful (3)
(approx) 1 Hour
Simple installation for anyone.
What's in the Box