Win $17,760 For Your Truck! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

4 More Days for Free Shipping! Get it by Dec 24th available on most items - Details

JLT Performance Ram Air Intake (97-03 5.4L)

Market Price $186.44 You Save 12% ($22.44)
Starting At

$164.00

FREE Shipping
  • Item T26002B
  • MPN# RAI-FEF-9703

Will this fit your F-150?

Features & Details

  • Streamlines Airflow
  • Gains up to 8-12 RWHP and 10-14 RWTQ
  • Black Powdercoated Aluminum Intake Tube
  • Reusable 4x12 Oval S&B Air Filter
  • Simple Installation and Maintenance
  • CARB EO #: D-761
  • Designed and Manufactured in the USA
  • Fits 1997-2003 5.4L F-150s
  • Not Compatible with Lightning and 2002-2003 Harley Davidson Editions
Serious Power. There is serious power at stake here that you can access with this JLT Performance Ram air intake. You can bring between 8 and 12 more HP to your pickup truck with this simple addition. That's enough power for you to start driving more confidently and to make the most of your truck. This intake kit makes your truck more streamlined and gets air going to the engine at an increased rate.

No Tune. It might seem necessary to tune up your truck to make use of this intake kit, but that's not necessary. It will work fine without any tuning at all thanks to careful design. If you do tune your truck make sure that the company factors in the intake and does everything to make it as effective as possible and you could see even greater benefits.

8 Layer Filtering. This JLT Performance Ram air intake comes with an eight layer filter that's very effective without being too restrictive. It cuts off the flow of most debris with aluminum mesh filtes on the end of the unit. From there you get 8 layers of cotton fabric that's oiled for maximum protection. This fabric is highly effective and it's washable too.

Simple Quality Material. JLT relies on aluminum and stainless steel for this intake. The intake pipe is made from a smooth black powder coated aluminum that's durable and corrosion resistant. The hardware used to lock it in place is stainless steel and highly durable to most conditions. Silcone couplers and reducers are also relied on to connect everything together and to keep an air tight fit.

Just an Hour. It's amazing how simple this kit is to install. You can put this JLT Performance Ram air intake into position in one hour with minimal tools. Simply install it and start making use of it immediately. It's that simple.

Two Year Protection. There is a two year warranty on this JLT Performance Ram air intake from the company. That's enough time for you to decide if the product is working properly or not.

CARB Approval. Thanks to CARB certificate D-761 this unit is legal for use in just about every single state. It's legal for you to use and you don't have to worry about local restrictions.

Application. This JLT Performance Ram Air Intake is specifically designed to fit on 1997-2003 F-150s powered by the 5.4L V8 engine. It is not compatible with the SVT Lightning and 2002-2003 Harley Davidson Editions.

Fitment: 1997 1998 1999 2000 2001 2002 2003 Details

What's in the Box
  • (1) Intake Tube with IAT & PCV Fittings
  • (1) 3.5 x 2" Silicone Coupler
  • (1) 3-3.5" x 3" Silicone Reducer
  • (4) #56 Clamps
  • (1) 4x12” Oval Air Filter
  • (1) MAF Adapter w/ Bolts
  • (1) MAF Gasket
  • (1) MAF Wire Harness Extension
  • (1) Section of 3/4" Hose
  • (1) Section of 5/8" Hose
  • (2) Small Clamps
Installation Info
Will it fit my F-150?

Most Helpful Reviews

4/5
JLT intake

I love this new intake it looks sweet and sounds good can't really tell a performance gain but maybe a little better throttle response, be prepared if you get this to go to autozone or oriellys and get ...

Read More
Helpful (2)

5/5
Very clean look

Works great, looks good and really cleans up the engine bay, not having the stock air box gave me the perfect place to add a second relay/fuse box for off road lights and accessories as well as a great ...

Read More
Helpful (1)

Overall Rating 4.7 out of 5 stars
Read All 7 Reviews

Customer Photos (1) Submit Your Photo

View 1 Photo

You Might Also Like

6 Questions / 5 Answers

Ask a Question

Can this intake be used with the BBK 75 mm throttle body for the 5.4 and what is used to clean the air filter?

KevanL

What's the difference between the 5.4 and the 4.6 on the ram air intake

ThomasR

  • The only difference between the 4.6 and the 5.4 JLT Performance Ram Air Intake for the 97-03 F150s is fitment. The one for the 4.6 will only fit the 4.6L engine and the same for the 5.4 will only fit the 5.4L engine. They both provide the same gains.

    AMJustin

Helpful (0)

Why doesn't this work with the 5.4?

JosephH

  • For the 5.4L you would want to look at T26002B JLT Ram Air Intake.

    Rob D

Helpful (0)

Is it possible to add a second filter (just the filter) and if so how much?

BobE

  • At this time we do not offer separate filters for the JLT Ram Air Intake. These can be sourced directly from JLT.

    Rob D

Helpful (0)

Does this product affect my mass air flow sensor

Buzzducky

  • This item will not your MAF sensor.

    KevinD92

Helpful (0)

Just wondering if this would work with the BBK 75mm throttle body for the 4.6?

Max

  • Yes, the coupler this uses will be able to stretch.

    AMSam

Helpful (0)

More Products You Might Like

Customer Reviews (7) Write a Review

Overall Rating 4.7

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 3.857143 3.9
  • Fit 4.714286 4.7



  • 4/5

    Installation Time: Afternoon

    June 23, 2017

    Review from JLT Performance Ram Air Intake (97-03 4.6L)

    JLT intake

    I love this new intake it looks sweet and sounds good can't really tell a performance gain but maybe a little better throttle response, be prepared if you get this to go to autozone or oriellys and get some more 1/2" and 3/4" hose I think it was when it's fully installed it sticks to far away from the cob and idler air hoses I think they are so just busy some more tube and extend them and you'll be good to go probably an extra $10 or so so just be prepared to do that. Maybe a 2.5 hour job with the time include driving to the store and back

    TalonA

    Year: 2000

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    October 20, 2017

    Very clean look

    Works great, looks good and really cleans up the engine bay, not having the stock air box gave me the perfect place to add a second relay/fuse box for off road lights and accessories as well as a great spot to put my gang blocks for the wiring literally took 10 minutes to install

    MajorPain

    Year: 1999 Submodel: 5.4L V8 XLT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    September 16, 2017

    Great product

    Looks great, Can tell a difference. Easy installed

    JeffM

    Year: 2003

    Helpful (1)

  • 5/5

    May 30, 2017

    JLT Ram Air Intake (97-03 5.4L)

    This was a great purchase, really feel a difference. I've used all kinds of cold air intakes and this one by design really works well. Also the price on it was a deal and the install was easy.

    Texasjack6823

    Year: 1997

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    February 10, 2017

    Review from JLT Performance Ram Air Intake (97-03 4.6L)

    Definitely "ram" air.

    I have just installed this product on my 04 Crew Cab Heritage Edition with the 4.6 V8. The longest part of the install was removing the stock mass airflow housing from the contraption that Ford decided to entomb it in. Installation is pretty straight forward although I had to purchase a foot of 3/4 breather hose. There is a tube which I believe goes to the idle control valve that has a plastic contraption that puts the hose at a 90 degree angle. With the supplied tubing, this product will work. However on my truck there was no way to retain the stock engine cover because that plastic 90 degree piece could not be positioned far enough out of the way. Ran to my local Advance auto and just ran about a 10 inch long section of hose from the idle air motor to the ram air intake and clamped it down. This allowed me to re-install the engine cover. As for performance it is negligible. Im sure with some sort of canned tune it will wake the truck up. I use the truck for towing snowmobiles and the occasional Miata so I will see how it performs with a heavy load. Heat soak will definitely be an issue with this "ram air" intake as the air making its way in from the gap between the hood and the grille will be minimal. More disappointing is the fact that the engine's soundtrack has not changed much. A very slight growl under 3/4 to full throttle is noticeable, which tells me that the stock intake wasn't very restrictive at all. Fit and finish is good, product seems quality. Good luck getting the intake air temperature sensor out of the stock intake tube, mine was practically glued in there. Product as described, not sure about performance gains though.

    Micky

    Year: 2003 Submodel: 4.6L V8 XLT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    February 01, 2017

    Review from JLT Performance Ram Air Intake (97-03 4.6L)

    Air intake

    It works great!it was pretty easy to install took me less than an hour to do put it on its a good upgrade!

    Joeyakadaddy

    Year: 2000

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 11, 2017

    Great ram air

    This JLT comes with everything to hook up correctly and it looks great as well and the placement of the intake gets much more fresh air then the stock air box. JLT really know what they are doing and freed up some HP and throttle response in my truck. This won't be the last product from JLT I buy.

    sicksix

    Year: 2003 Submodel: 5.4L V8 Lariat

    Helpful (0)

Related F-150 Categories