Win $5,000 For Your F-150! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

JLT V3.0 Black Oil Separator - Passenger Side (11-18 2.7L/3.5L EcoBoost, 5.0L, 6.2L)

Market Price $166.99 You Save 17% ($27.99)
Starting At

$139.00 (each)

FREE Shipping
  • Item T529996
  • MPN# 3016P-B

Will this fit your F-150?

Features, Video & Details

  • Reduces Blow-By and Engine Sludge
  • Version 3.0 - 3 oz Capacity
  • Aluminum Honeycomb Filter with Fine Mesh Screen
  • Solid Billet Aluminum Construction
  • Black Anodized Finish
  • Passengers Side (PCV Side) Kit
  • Not CARB-Approved
  • 1-Year Limited Warranty
  • Fits 2011-2018 F-150 with 2.7L/3.5L EcoBoost, 5.0L and 6.2L Engines

Review & Installation Video

Review & Install Video

Keeps Oil Separate. Heavy use can cause a great deal of oil to vent through the crankcase vent. Your engine’s PCV system feeds this waste oil back into the intake system for burning in the cylinders. However, the oil can dilute fuel and lower octane. The JLT V3.0 Black Oil Separator catches the oil fumes from the crankcase vent, storing them for occasional safe disposal. The oil separator keeps your fuel pure, ensuring maximum performance in your F-150.

Version 3.0. JLT improved on the designed of its old Oil Separator with the introduction of the new and improved Version 3.0. The first big change you will notice is that the Version 3.0 Separator has a larger 3 oz. capacity, that is almost double that of its previous model. Another important difference is the filter media. Older JLT Separators used a Ford Motorcraft pre-filter, but now JLT uses a 1/2" thick 1/16th" aluminum honeycomb filter with a mesh stainless steel screen to trap even more fine oil vapors than before. That helps prevent them from gumming up your engine.

Superior Quality. This JLT Performance Air/Oil Separator is proudly manufactured in the USA. JLT CNC-machines its Air/Oil Separator from a solid block of billet aluminum for superior strength. Designed with a rubber o-ring, this Separator will maintain a tight leak-free seal. The base features a knurled texture, so that it can easily be gripped for removal during routine oil changes. JLT then completes the Catch Can in a durable black anodized finish for impressive good looks and long lasting corrosion resistance.

Easy Installation. Installation is quick and easy. All parts and hardware necessary are included.

Application. This black JLT V3.0 Oil Separator is specifically designed to be used on the passenger side of the 2011-2018 F-150s equipped with either the 2.7L/3.5L EcoBoost, 5.0L or 6.2L engine. Not for use in California on any emissions-controlled vehicle.

Fitment: 2011 2012 2013 2014 2015 2016 2017 Details

What's in the Box
  • (1) Oil Separator
  • (1) Mounting Bracket
  • (2) Fine Thread Machine Screws
  • (1) 6mm Nut
  • (1) J-Clip
  • (1) M6 Bolt
  • (1) 18" Hose with 90 Degree Fitting
  • (1) 21" Hose with 45 Degree Fitting
Installation Info
Will it fit my F-150?

People Who Bought This Item Also Bought

Most Helpful Reviews

3/5
Check your hoses

JLT makes excellent oil separators, but check to see what kind of hoses you receive. The Mustang JLT separators all use the OEM hard nylon tubes that are rated for use with oil/gas vapors. But for some ...

Read More
Helpful (7)

5/5
Perfect fit

Fits and quality are great as expected from JLT no more oil getting into my intake system to clog everything up

Helpful (3)

Overall Rating 4.4 out of 5 stars
Read All 10 Reviews

Customer Photos (3) Submit Your Photo

View All 3 Photos

You Might Also Like

3 Questions / 2 Answers

Ask a Question

Why isn't the driver's side needed?

Sean

  • With the new models the oil only tends to come through on the passenger side and not the driver side, which is why many people run just the passenger side oil separators. You can run the driver side as well but most likely it will not catch anything as nothing comes through the driver side.

    Ricky36

Helpful (1)

Will this void the factory warranty? Do you need one for the driver side also?

PatrickR

  • We suggest reaching out to your Ford dealer to check and make sure the JLT V3.0 Black Oil Separator will not void your warranty. The oil separator isn't required for the drivers side.

    TerriB

Helpful (1)

why only passenger side? its just this needed?

JoseM

More Products You Might Like

Customer Reviews (10) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 3.8 3.8
  • Fit 4.4 4.4



  • 3/5

    Installation Time: Less than 1 Hour

    January 06, 2017

    Check your hoses

    JLT makes excellent oil separators, but check to see what kind of hoses you receive. The Mustang JLT separators all use the OEM hard nylon tubes that are rated for use with oil/gas vapors. But for some reason, JLT chose to use Thermoid Air Brake Hoses (SAE J1402A) for some of the other applications (EcoBoost F-150/SHO/Explorer). Thermoid does not recommend the use of these hoses for gas vapors, and the pin hole vents in the hoses don't help as they were designed for moisture to vent out. Instead, gas vapors seep out of the pores of the hoses, and I found out the hard way after my garage just smelled of gasoline after 2 weeks of using the JLT. It was easy to switch out the hoses for Gates PCV/EEC hose (SAE J30R6) or fuel hoses (SAE J30R7) as they were 1/2" ID. Some of the vehicles don't have problems if all the separators catch is engine oil, but the EcoBoost GTDI engines have a lot of fuel dilution in the oil - so the separators are catching mainly fuel vapors and condensation. Again, these are great overall separators (not as efficient as RX or UPR - but still decent) if they use the OEM hard nylon tubes. If they have Thermoid Air Brake hoses, be prepared to swap them for PCV/EEC/Fuel hose which isn't hard or expensive to do.

    fusionvic

    Year: 2016

    Helpful (7)

  • 5/5

    Installation Time: Less than 1 Hour

    May 06, 2017

    Perfect fit

    Fits and quality are great as expected from JLT no more oil getting into my intake system to clog everything up

    Kyle

    Year: 2016 Submodel: 5.0L V8 XLT

    Helpful (3)

  • 4/5

    Installation Time: Less than 1 Hour

    July 10, 2017

    2017 Ecoboost

    No pictures for the 2017 EB f-150. The fit was a little tight with the wire harness and the tube on the left (intake manifold). I was able to make it for after I moved a little clip holding the harness. I hope that doesn't cause friction and ruin the wires. Great at what it's supposed to do though.

    KieferR

    Year: 2017

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    October 19, 2017

    Jlt v3.0 oil separator

    Good product, does what it says. After 2k mi or so had about 1 tblspoon of oil. Thats oil not coating my intake valves. I have black and it dissappears under hood. Is difficult to pull the canister off as it is close to firewall, scrape knuckles a little. Hoses are fine, dont notice any extra smell of fuel in my garage as some others have noticed.

    Shawn

    Year: 2016 Submodel: 2.7L V6 EcoBoost XLT

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    October 19, 2017

    great catch oil

    its was a little complicated to install, the instruction was black and white and was really hard to see where to mount the bracket.

    FeM

    Year: 2017 Submodel: 3.5L V6 EcoBoost XLT

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    October 19, 2017

    New motor install.

    Just installed on 2.7 EB, very easy, checked for oil only after 1000 miles, wasn't any! Will check after a few thousand. Might be new motor/no load.

    TimO

    Year: 2016

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    October 07, 2017

    Works exactly as advertised.

    Super easy to install!! It does collect oil as advertised. Best plug and play equipment I have ever purchased! Have not noticed any increase in performance or ease of cold start driving. But it definitely collects the oil, so I know it is working, as far as that.

    JoeR

    Year: 2013 Submodel: 3.5L V6 EcoBoost XLT

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 20, 2017

    Great Investment

    This is a great investment for protecting your motors longevity. Great fit and quick install.

    DorianF

    Year: 2016 Submodel: 3.5L V6 EcoBoost Lariat

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 08, 2017

    easy install

    100 great easy install works great just like all the other stuff I bought from American muscle

    CharlesH

    Year: 2016 Submodel: 2.7L V6 EcoBoost XLT

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    June 18, 2017

    Works Fine

    The hole you need to mount it to was too high for the bracket. I just cut a little plastic to make it fit.

    NotAMustang

    Year: 2012

    Helpful (0)