Eliminate Pedal Lag.
When you are driving your F-150 on the highway and you need to speed up to pass the slower traffic, you may notice a delay between the time you step on the gas pedal and when you accelerate. This throttle response delay is caused due to the modern Electronic Throttle Control (ETC) Technology, which is also known as Drive-By-Wire. If you're looking to eliminate the annoying delay and improve your driving experience, then JMS has exactly what you are looking for with their PedalMAX Drive By Wire Throttle Enhancement Device. The PedalMAX is designed to enhance the signal between the pedal and ECU, which in turns sends the signal to the throttle body to make it more sensitive, so you can accelerate quicker.Improves Power and Eliminates Turbo Lag.
The JMS PedalMAX will not only eliminate pedal lag, but it will also enhance the throttle response, horsepower and torque in the low to mid RPM range. The PedalMAX is also ideal for eliminating turbo lag when accelerating, which is an issue for the F-150s equipped with a 2.7L or 3.5L EcoBoost V6 engine.Maximum Throttle Response.
Out of the box, the PedalMAX Throttle Enhancer is preset to provide maximum increase in throttle response. If you find the stock setting to be too aggressive for your driving needs, you can insert the supplied 4-pin RED de-sensitizing plug into the device. The RED de-sensitizing plug will reset throttle response to about 60% of the maximum setting. However, with the optional Remote Throttle Control Knob (part# BX-6999
) you can adjust throttle response from 0% to 100% on the fly to match your specific driving style.Stackable.
The JMS PedalMAX can be stacked or used in conjunction with other aftermarket OBD-II programmers and monitors. It is compatible with products from manufacturers such as SCT, DiabloSport, Edge, Superchips, Bully Dog, and Hypertech.Modern Electronics.
The PedalMAX Drive By Wire Throttle Enhancement Device features JMS's exclusive state of the art digital technology housed in a proprietary sealed enclosure. The PedalMAX comes complete with plug and play wiring harness using OEM connectors for a quick installation.Easy Plug & Play Installation.
The PedalMAX Throttle Enhancement Device simply connects to the factory stock pedal position sensor using an OEM style connector with no permanent modifications required. PedalMAX is 100% reversible making it warranty friendly.Application.
This JMS PedalMAX Drive By Wire Throttle Enhancement Device is designed for use on all 2009-2017 F-150s, excluding 2017 EcoBoost Models.Application Note.
Some early 2009 F-150 models may have a plug that is the same as the 2004-2008 model years. If you do, then you will need the JMS PedalMAX Drive By Wire Throttle Enhancement Device part# PX-5000-0510F.Technical Note.
This device is not
compatible on the 2017 model year equipped with the 2.7L EcoBoost, 3.5L EcoBoost or High Output 3.5L EcoBoost V6 engines. You would need JMS part# PX17FT instead.