Win $17,760 For Your Truck! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Last Day for Free Delivery by Dec 24th available on most items - Details

K&N Series 77 High Flow Performance Cold Air Intake (11-12 6.2L, Excluding Raptor)

Market Price $371.44 You Save 13% ($48.45)
Starting At

$322.99 (kit)

FREE Shipping
  • Item T525668-C
  • MPN# 77-2584KP

Will this fit your F-150?

Features & Details

  • Series 77 High Performance Cold Air Intake
  • Estimated Horsepower Gain of 18.74 HP @ 5267 RPM
  • Estimated Torque Gain of 12.61 TQ @ 3431 RPM
  • Free-Flowing Aluminum Intake Tube
  • Washable & Reusable Filter
  • No Computer Tune Required
  • CARB EO Number: D-269-48
  • Simple Bolt-On Installation
  • Fits 2011-2012 6.2L F-150s, Excluding Raptors
Big Power Gains from a Simple CAI. Bring cool air flooding into your 2011-2012 F-150’s combustion chamber via the non-restrictive aluminum tubing of the K&N Series 77 High Flow Performance Cold Air Intake for some extra power. Whether for towing or the track, highway driving or off-road dirt wrangling, the bonus +18.74 horsepower and +12.61 ft-lbs of torque will come in handy wherever you’re using your vehicle. The easier breathing your F-150’s 6.2L engine experiences also improve its throttle control, acceleration, and fuel economy, to boot.

No Tuning Required for Use. No tune is needed for the K&N Series 77 High Flow Performance Cold Air Intake. The CAI will run at its normal high capacity with the stock tune in place on the ECU.

Professional Grade Reusable Filter. Air entering the K&N Series 77 High Flow Performance Cold Air Intake passes through an extra-large conical air filter to reach the engine. This filter consists of oiled red cotton gauze, precision made for the correct pleat depth for maximum inflow and filtration. The first cleaning isn’t needed until approximately 100,000 miles of driving, at which point the filter can be washed, dried, oiled, and reused repeatedly.

Constructed and Finished to High Standards. The cotton gauze air filter of the K&N Series 77 High Flow Performance Cold Air Intake has a chrome top plate and is penned inside an injection molded polyethylene cold air dam. The dam is black and has a matte finish. Beyond this point, there is an aerodynamically shaped free-flowing aluminum intake tube. The tube is polished for aesthetic reasons and is, of course, rust-proof. Various sections of this USA-made component are held together with 5 stainless steel clamps.

MAF Housing for Stock MAF. The MAF housing found in the K&N Series 77 High Flow Performance Cold Air Intake is designed to reuse the MAF found in the factory intake. Furthermore, there are fittings for the EVAP hose and an included silicone crankcase vent hose.

Attaches with No Hassle. The K&N Series 77 High Flow Performance Cold Air Intake fits onto the mounting holes already present in your F-150, using its own hardware kit (included). You can complete the installation using ordinary tools like wrenches and ratchet sets, and don’t need to drill or cut.

Warranted for 1 Million Miles. The K&N Series 77 High Flow Performance Cold Air Intake is protected by a million mile limited warranty.

CARB Certified for Emissions. The K&N Series 77 High Flow Performance Cold Air Intake is made to meet the requirements of CARB regulations and is consequently 50 state street legal. The executive order has the CARB EO Number #D-269-48. This means it can be owned, installed, and driven in every American state, including California, and other states where the CARB rulings are used as local emissions law.

Application. This K&N Series 77 High Flow Performance Cold Air Intake is specifically design to fit the 2011-2012 F-150s powered by the 6.2L V8 engine. It is not compatible with the 6.2L SVT Raptors.

Note: Coupon codes cannot be applied to this product.

Fitment: 2011 2012 Details

What's in the Box
  • (4) #56 Hose Clamps
  • (1) Reinforced Hose
  • (1) Intake Tube
  • (1) Nylon Vent
  • (1) PLAS Vent
  • (1) 5/8" x 20" Hose
  • (1) 3/8" x 5" Hose
  • (1) 3/8" Hose Vent
  • (2) M4 Bolts
  • (1) 35" Edge Trim
  • (1) Hump Reinforced Hose
  • (2) M6 Buttonhead Bolts
  • (2) M6 Split Lock Washers
  • (2) OD-SAE Washers
  • (1) Heat Shield
  • (1) 19" Edge Trim
  • (1) Filter Couple Adapter
  • (1) #104 Hose Clamp
  • (1) Air Filter
  • (1) Extension Harness
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Engine: 2011-2012 6.2L Filter Placement: Engine Bay
Material: Aluminum Finish: Polished 
Manufacturer: K&N Computer Tune Required: No

Estimated Horsepower & Torque Gains:
Estimated 6.2L HP:  18.74hp @ 5267rpm Estimated 6.2L Torque: 12.61lbft @ 3431rpm
Will it fit my F-150?

Most Helpful Reviews

5/5
Impressive Improvement

This product was very easy to install. I have seen approximately a 3 MPG improvement. Recommended.

Helpful (4)

5/5
Installation/performance/sound

The installation was very easy and all parts fit as expected. The performance was noticeable from the low range all the way through the higher range. The deep growl that this added to the truck is dead ...

Read More
Helpful (2)

Overall Rating 4.7 out of 5 stars
Read All 29 Reviews

Customer Photos

You Might Also Like

1 Questions / 1 Answers

Ask a Question

hello im looking into buying something like this. My two questions are why does it say this will not fit if I have a body lift? My other question is what is the difference from this and the black out series other than the color and price. Just trying to figure out which one I should buy thank you.

danh

  • The K&N Series 77 High Flow Performance Cold Air Intake attaches both to the engine, which is mounted to the frame through the K member, and it attaches to to the body. When installing a body lift, the distance between the mounting points change, and this intake is not flexible enough to accommodate for this. The K&N Backhawk would have several minor differences in design, but the primary differences are the black powdercoat, and black filter.

    Rob D

Helpful (0)

More Products You Might Like

Customer Reviews (29) Write a Review

Overall Rating 4.7

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 4.541667 4.5
  • Fit 4.875 4.9



  • 5/5

    August 28, 2016

    Review from K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L)

    Impressive Improvement

    This product was very easy to install. I have seen approximately a 3 MPG improvement. Recommended.

    REDCandy

    Year: 2013 Submodel: 5.0L V8 XLT

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    January 06, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    Installation/performance/sound

    The installation was very easy and all parts fit as expected. The performance was noticeable from the low range all the way through the higher range. The deep growl that this added to the truck is dead on. This was in stalled on my sons 2012 f150 Harley truck that has the 6.2 lite. He thought he wanted exhaust also but after installing this intake he changed his mind.

    KingTex

    Year: 2012

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    July 09, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    Extremely impressed

    I was getting around 11.2 MPG before I bought this air intake and after the install, I noticed a huge improvement in throttle response and my MPG. I’m getting around 14.4 MPG now and it’s still going up.

    KennethK

    Year: 2014 Submodel: 5.0L V8 XLT

    Helpful (1)

  • 5/5

    June 27, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    Beautiful

    Installation was a breeze. More power but slightly more noise than I anticipated.

    GilbertS

    Year: 2014 Submodel: 3.7L V6 STX

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    April 13, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    Very nice looking intake

    Very nice and shiny air intake when you open the hood it definitely sticks out, it works really well and sounds good when you step on the throttle, you can hear the difference, I have dual flow master exhaust and it made it quite a bit louder on my 13 F150, 5.0 engine, the only bad thing and I don't mind it but it rumble's in the back cab more but that way you don't have to listen to the rear seat drivers lol, All in all I would recommend it to to anyone that wants a great working air intake and you will notice a difference in power to very nice thanks,

    oldman

    Year: 2013 Submodel: 5.0L V8 XLT

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    April 04, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L)

    Very nice looking intake

    Took about 25 mins is all to install but I've worked on trucks most of my life, anyone can install, My truck seems to have a little extra power just hard to tell right now, I'm getting a tune next then it should make more power very nice cold air intake for the money nice and shiny lol thanks

    oldman

    Year: 2013 Submodel: 5.0L V8 XLT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    April 02, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L)

    Easy to install, good sound to it.

    Obviously this less restricted intake alone will not give you a major increase in performance. but with extra bolt ons like a 85mm throttle and a quick tune and you can feel the difference. this thing sounds amazing in the 2500 rpm-and up bracket. I would highly recommend buying this.

    KyleB

    Year: 2013 Submodel: 5.0L V8 XLT

    Helpful (1)

  • 4/5

    March 21, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    Great Sound!

    With no mechanical ability at all, the installation was simple and straightforward. I'm not sure how many HP it actually provides, but the throttle response is much quicker and the sound is amazing from a simple intake. I would definitely recommend.

    JoshH

    Year: 2009 Submodel: 4.6L V8 XLT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    March 10, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    Easy Install, Performance Booster

    It only took me a friend 35 minutes to remove the factory air filter and intake housing and install the KandN Series 77Cold Air Intake.

    Paul

    Year: 2012

    Helpful (1)

  • 3/5

    Installation Time: Less than 1 Hour

    December 28, 2016

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    Cold Air Intake

    Sounds great, but it does not save on gas. I have had it for about a month and I have not seen any savings. I was getting about 15 mpg (in city driving), and actually I am now getting about 14.7 mpg.

    Joe

    Year: 2012

    Helpful (1)

  • 5/5

    September 27, 2016

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    K N Performance

    I am very pleased that this product was easy to install and works wonderfully. I have been using KandN filters for several years and have never been disappointed.

    Duff

    Year: 2013 Submodel: 5.0L V8 XLT

    Helpful (1)

  • 5/5

    July 20, 2016

    Review from K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L)

    More power!!!

    This was easy to install, about 1.5 hours. Directions are easy to follow, very few tools required. Best part of all... More power and sounds great!!

    4Xfanatic

    Year: 2011 Submodel: 5.0L V8 FX4

    Helpful (1)

  • 5/5

    July 12, 2016

    Review from K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L)

    Great product

    Great fit and has mad a difference on how my truck runs while puling my travel trailer

    Richyrich327

    Year: 2013 Submodel: 5.0L V8 STX

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    December 24, 2015

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V)

    one of the cleanest intakes ive ever had!

    installing this intake was a breeze taking roughly about an hour to get done! the oiler filter has a very good amount of protection. you can feel the power gains from this intake!

    AlexM

    Perth Amboy, NJ

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 18, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L)

    Great sound

    Increase performance, mpg, if you are looking for more power this intake is what you need. Just be aware that with more power comes more sound.

    Kenneth

    Year: 2013

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    November 13, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L)

    solid

    Easy to install, good fit, overall good product. Would recommend.

    Kyle

    Year: 2011 Submodel: 5.0L V8 XLT

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    November 01, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L)

    kn cold air

    fit very good,looks good and a noticeable power gain and better throttle response

    maniacmustang

    Year: 2011 Submodel: 5.0L V8 XL

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    October 21, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    Nice

    Very nice fits awesome great upgrade. Will pay its self off in long ..great buy

    GarrettH

    Year: 2013

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    October 17, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (09-10 4.6L 3V; 11-12 6.2L; 12-13 3.7L; 11-14 5.0L; 10-14 6.2L Raptor)

    Good looks

    Very nice looking under the hood. Only thing fits a little close to the hood. Sounds like a lot of air.

    DBednar

    Year: 2013 Submodel: 5.0L V8 XLT

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    September 19, 2017

    Review from K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L)

    Nice product

    It produces a nice sound and a bit more response in acceleration, I don't think I experienced as much difference as the others because I have a 6 in lift on my truck. Only downside is that I lost .2 mpg

    TheodoroG

    Year: 2014

    Helpful (0)

Related F-150 Categories