K&N Series 77 High Flow Performance Cold Air Intake (12-14 3.7L F-150)

Hard-Charging CAI with Proven Power Gains. A straightforward and effective upgrade to your 2012-2014 F-150’s intake system, the K&N Series 77 High Flow Performance Cold Air Intake ensures your truck’s 3.7L engine actually gets the amount of cold air it can handle. Guaranteed to grant power gains at all RPM levels, this CAI is dyno proven to be capable of raising horsepower by +11.91 and boosting torque by +10.33 ft-lbs. The silver powder-coat on the aluminum intake tube also makes it a handsome addition to the engine.

Needs No Tune Except Stock. Since it reuses the stock MAF, the K&N Series 77 High Flow Performance Cold Air Intake doesn’t require an aftermarket tune in order to work. You can utilize this component with the OE tune still in use.

High Capacity, Top Effectiveness Filter. The K&N Series 77 High Flow Performance Cold Air Intake is equipped with a cotton gauze filter whose durability is enhanced by two layers of aluminum mesh with epoxy coating. An oiled filter, this element catches a wide range of particulates while allowing maximum air inflow. It can be periodically washed and reused (first washing at 100,000 miles).

Manufactured for Reliable Action. Tough and durable materials are used in the K&N Series 77 High Flow Performance Cold Air Intake, a component that’s made in the USA. The air box is made from light but strong injection-molded polyethylene, with an EPDM foam seal along the upper edge to fit tightly against the underside of the hood, blocking out engine heat. The intake tube is rust-immune aluminum, finished with a silver powder-coat and painted with the eye-catching K&N logo.

MAF Housing for Factory MAF. The K&N Series 77 High Flow Performance Cold Air Intake has a MAF housing that fits the factory MAF exactly. There are also fittings for mounting the crankcase vent hose and EVAP vent hose.

Bolt-On Part with Fast Fitment. Hand tools like wrenches, screwdrivers, and a ratchet set are all you need to successfully install the K&N Series 77 High Flow Performance Cold Air Intake. The component is made for bolt-on application to the current mounting points, and comes with all needed hardware.

Warranted for a Million Miles. The warranty of the K&N Series 77 High Flow Performance Cold Air Intake is one of the longest possible short of a lifetime, with 1 million miles of coverage.

Ready for Use in All 50 States. CARB certified, the K&N Series 77 High Flow Performance Cold Air Intake can be driven anywhere in the United States – it is 50-state street legal. The CARB Executive Order (EO) Number is #D-269-48. The component can be purchased, used, and driven on streets, roads, and highways in California or other locations that use CARB regulations, as well as the rest of America.

Application. This K&N Series 77 High Flow Performance Cold Air Intake is specifically design to fit the 2012-2014 F-150s powered by the 3.7L V6 engine.

Technical Note. The K&N Cold Air Intake is not designed for vehicles equipped with a Body Lift.

Shop All Truck Parts And Accessories

Shop All Cold Air Intakes For Trucks

Fitment:

• 2012 Ford F-150
• 2013 Ford F-150
• 2014 Ford F-150

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov