K&N Series 77 High Flow Performance Cold Air Intake (11-14 5.0L F-150)

Guaranteed to Improve Performance. Creating a powerful sound under your 2011-2014 F-150’s hood, the K&N Series 77 High Flow Performance Cold Air Intake gives your truck’s 5.0L engine a more impressive presence – along with awesome performance gains. Dyno testing proves that the big dose of air this CAI administers to your pickup engine generates +10 horsepower and +9.8 ft-lbs of torque. The engine runs better across many different measurements – including fuel economy (+1 to +2 mpg) and staying cooler under heavy loads, such as when towing or powering forward over a difficult trail.

Attaches without a Tune. The K&N Series 77 High Flow Performance Cold Air Intake is made to need no aftermarket tune in order to run. The stock tune is fully adequate to correctly run the CAI in balance with the rest of your truck’s engine.

Feature-Rich Filter Element. The K&N Series 77 High Flow Performance Cold Air Intake includes a high-flow air filter that’s capable not only of being cleaned, but of going strong for 100,000 miles before it needs its first cleaning. Fabricated out of red cotton gauze, it includes two epoxy-coated aluminum screens for strength. You can wash, re-oil, and reuse this component many times.

Well-Made Component. Mixing aesthetics and practicality, the polished aluminum intake tube of the K&N Series 77 High Flow Performance Cold Air Intake offers both a liquid sheen of reflective, almost chrome-like metal, and rust-proofing. This particular version of the CAI also features an injection molded air box / heat shield. The intake tube is designed with a constant diameter throughout, enabling fast, smooth passage of cool oxygen-rich air. The part includes stainless steel clamps.

Handily Reuses the Stock MAF. When installing the K&N Series 77 High Flow Performance Cold Air Intake, the OEM MAF fits directly into the MAF housing of this component. The setup also includes attachments for the EVAP and crankcase vent hoses.

Plain and Effective Install Process. It will take you 1.5 hours (90 minutes) at most – and probably a lot less – to attach the K&N Series 77 High Flow Performance Cold Air Intake to your F-150. A no-cut, no-drill bolt-on fitment, the CAI attaches to the stock mounting points using simple hand tools and the included hardware.

Million Mile Limited Warranty. Protecting your investment in this component, a 1 million mile warranty applies to the K&N Series 77 High Flow Performance Cold Air Intake.

Legal in Whole US (CARB Certified). The K&N Series 77 High Flow Performance Cold Air Intake is ready to roll – legally – on any road within the borders of the United States. The component carries a CARB EO Number – #D-269-48 in this case – which makes it 50-state street legal, since it passes the most stringent current emissions benchmark in the USA, CARB regulations. This CAI can be legally purchased and used in the State of California and those ares which imitate its rules.

Application. This K&N Series 77 High Flow Performance Cold Air Intake is specifically design to fit the 2011-2014 F-150s powered by the 5.0L engine.

Technical Note. The K&N Cold Air Intake is not designed for vehicles equipped with a Body Lift.

Shop All Truck Parts And Accessories

Shop All Cold Air Intakes For Trucks

Fitment:

• 2011 Ford F-150
• 2012 Ford F-150
• 2013 Ford F-150
• 2014 Ford F-150

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov