Win $17,760 For Your Truck! Enter Now!
Talk to an F-150 Expert
Mon - Sun, 8:30 AM EST - 11:00 PM EST

2 More Days for Free Shipping! Get it by Dec 24th available on most items - Details

K&N Series 57 FIPK Cold Air Intake (11-12 6.2L, Excluding Raptor)

Market Price $310.49 You Save 13% ($40.50)
Starting At


FREE Shipping
  • Item T527888
  • MPN# 57-2584

Will this fit your F-150?

Features & Details

  • Estimated Horsepower Gain of 27.18 HP @ 5347 RPM
  • Estimated Torque Gain of 16.97 TQ @ 3578 RPM
  • Improves Airflow for Better Performance
  • 57 Series FIPK Air Intake
  • Free-Flowing High Density Polyethylene Intake Tube
  • Oiled Air Filter Removes Harmful Contaminants
  • Filter is Washable and Reusable
  • NO Computer Tune Required
  • CARB EO Number: D-269-48
  • Simple Bolt-On Installation
  • Fits 2011-2012 6.2L V8 F-150s, Excluding SVT Raptors
More Power. There's nothing wrong with more power and with a pickup truck more power is almost always a good thing. That's why so many truck owners like the K&N Series 57 FIPK cold air intake models. They offer excellent performance boosts by removing the restrictive paper filter and replacing it with a much more capable cotton filter that lets air flow freely and produces greater power levels. The kit creates huge levels of power and can help boost your truck's total power output by as much as 27.18 HP. That's a huge improvement for such a minor enhancement and it's enough added power for you to feel the difference as well.

No Tune Up. You're free to tune up your truck for better performance, but you aren't required to do so with this kit. It works just fine even when your truck isn't tuned. That's the true value of this high quality cold air intake kit. Add it to your truck and you'll have more power to work with, with or without a tuneup.

Full Air Filtering. Your truck will enjoy unfettered air access with this multi-layered filter. The filter is made from a few layers of aluminum mesh coated with epoxy for weather resistance. After the screens there are many different layers of top quality cotton that's been soaking in oil to keep particles at bay. It's this unique many-layered design of loose cotton material that allows air to flow so freely and quickly.

Plastic Mixed with Steel. This K&N Series 57 FIPK cold air intake mixes together polyethylene thick molded plastic with stainless steel and aluminum to create a top notch product. The intake relies on polyethylene for the heat shield as well as the intake tube. These two areas are highly durable and resist heat transfer to help keep the air cooler during standard operation. The cold air intake also relies heavily on stainless steel to hold parts in place using clamps. The aluminum of the filter is especially corrosion resistant and reliable to keep the air protected.

Simple Install. With just an hour of time you can install this intake kit. It bolts into position and does not require special knowledge or tools to get the job done. Simply fit it into position after removing the original equipment and then bolt it down. It's so simple.

Warranty for Life. K&N offers a One Million Mile Limited Warranty to customers, meaning that you should be covered for life without issue.

CARB Certified. CARB is a very strict emissions program that keeps ineficient vehicles off the road. This intake kit comes with Carb EO# D-269-48. allowing it to be legally used in each of the 50 states.

Application. This K&N 57 Series FIPK Cold Air Intake Kit is specifically designed to fit the 2011 to 2012 F-150s equipped with the 6.2L V8 engine and does not require re-tuning the vehicles computer for operation. Not compatible with the SVT Raptor.

Note: Coupon codes cannot be applied to this product.

Fitment: 2011 2012 Details

What's in the Box
  • (4) Hose Clamp #56
  • (1) Hose; 3-1/2”ID X 2”L Reinforced
  • (1) Intake tube (IT)
  • (1) Vent; STRT, 5/8” Barbed 1/4 NPT, Nylon
  • (1) Vent; STRT, 3/8” HOSE, 1/4” NPT, PLAS
  • (1) Gasket; 57-2556, 3-16 Poron
  • (1) Adaptor; #420, Nylon 6/6 GF, Black
  • (2) Washer; 6MM Flat, SS
  • (2) Bolt; M4-0.07 8MM, A/H Cap, SS
  • (4) Bolt; M6 X 1.00 X 16MM, Buttonhead, SS
  • (1) Hose 5/8”ID X 20”L
  • (1) Hose; 3/8” ID X 5”L
  • (1) Vent; STRT 3/8”” Hose- 3/8”Hose
  • (1) Edge Trim (35”)
  • (1) Hose; 3-1/2”ID X 2-1/2”L Hump Reinforced
  • (2) Washer; M6 Split Lock Zinc
  • (2) Washer; 1/4”ID X 5/8”OD -SAE
  • (1) Heat Shield
  • (1) Edge Trim (19”)
  • (1) Adapter; Universal, 6” Filter 3.5” Coupler
  • (1) Hose Clamp #104
  • (1) Air Filter
  • (1) Extension Harness
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Model: 2011-2012 6.2L Filter Placement: Engine Bay
Material: High density polyethylene plastic Finish: Black Finish
Manufacturer: K&N Computer Tune Required: No

Estimated Horsepower & Torque Gains:
Estimated 6.2L HP: 27.18 hp @ 5347 RPM Estimated 6.2L Torque: 16.97 ft/lb @ 3578 RPM
Will it fit my F-150?

Customer Photos (1) Submit Your Photo

View 1 Photo

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (1) Write a Review

Overall Rating 5.0

out of 5 stars

  • 5/5

    August 30, 2016

    Amazing product

    Installed it in my 2011 F-150 limited and gained about 3 more mpg, easy installation nothing difficult. I recommend it!


    Year: 2011 Submodel: 6.2L V8 Limited

    Helpful (0)

Related F-150 Categories