(approx) 2 Hours
Light to Moderate mechanical skill required.
- Customer Submitted:
- How to Install MAC Dual Exhaust Conversion Kit on Your 2005-2009 V6
Features, Description, Reviews, Q&A, Specs & Installation
Technical Note: When buying a dual cat-back or axle-back exhaust kit for your 2005 and newer V6 Mustang, you will need to select the "2005+ Mustang 304 Stainless Steel Exhaust Hanger Kit" from the drop down option menu above to properly install your new exhaust.
Fitment: 2005 2006 2007 2008 2009 2010 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
August 16, 2018
Bought this for my 07 V6. Had Midas do the install. As soon as I turned the key and heard that rumble, I was in LOVE! Makes feel like I'm driving a V8. Couldn't be happier. Hard to rate the noise, cause it really depends on 'when'. At idle, there's that nice rumble. On acceleration, the loudness kicks in and then levels out once you reach cruising speed.Helpful (5)
June 19, 2018
Sounds good with long tubes
Not stupid loud with long tube headers very nice deep v8 soundHelpful (6)
December 29, 2017
After researching and comparing products along with the reviews I decided to go with the Mac dual exhaust, and I gotta say im lovin' it! From the moment I turn the ignition on to when im cruising on the highway you hear that nice deep rumble. Installation was fairly easy took 2.5 hrs. close to 3 hrs. Sound quality is great, looks awesome once installed, definitely recommend this product.Helpful (7)
November 15, 2017
They look good but...
Hands down for me these are the best looking axle backs for this car but for the life of me I cannot get the driver side to fit right. The pipes just seem to off by 2” coming from the over-axle to the muffler. And the only way for it to fit is to have the muffler cockeyed and it looks really dumb.Helpful (7)
September 09, 2017
Not perfect fit
When you install it if looks perfect. Then it rattles it's life away under your car. At least it sounds half way decent. Not as loud as the reviews make it sound thoHelpful (7)
May 20, 2017
MAC dual exhaust conversion
Great product for the money. If you don't want a lot of cutting this is it. Fit right on and hooked up nicely. Exhaust note is great, very mellow at idle. Sounds like a v8 when starting and crusing. I am very pleased that i bought this system. 4 inch exhaust tips look great. I'm a happy camper. PaulHelpful (7)
August 26, 2016
This is the best bang for your buck FOR SURE. Does it ever sound great. Nice beefy/bass-y sound on idle, and definitely lets people know you're around if you put the throttle on. Little bit of drone at highway speeds, but no more than I've heard in other nice sounding systems. I used this with the 3DCARBON DUAL EXHAUST REAR VALANCE (05-09 V6) and it had to be adjusted a little bit to fit, but turned out looking great in the end. I was worried about the sound, because sound in videos/clips is so much different in real life, but this system delivers. Easy install too.Helpful (8)
June 22, 2016
Mac Dual Exhaust Kit
Bought this kit a little sceptical about its performance, as there are very few reviews, and man was i wrong. It installed in under an hour in the shop, and it sounds just like a v8 when idling. Absolutely worth the $$$!!!!Helpful (8)
February 07, 2015
Not good for convertibles
I do not recommend this product for convertibles. The drone is really bad and you cannot hear anything if you're going normal speed and acceleration. It sound nice and looks nice from the outside though! I'm probably going to put GT mufflers.Helpful (9)
September 18, 2013
This exhaust sounds great. It sounds deep, somewhat aggressive, and is not in the least way "ricey sounding". I recommend this exhaust to all 05-10 v6 mustang owners. I even noticed a little more power and acceleration with my car and also quicker throttle response. If your looking for the best bang for your buck, its this exhaust.Helpful (8)
Hello, I'm thinking about buying this exhaust and was just wondering if I'd have to buy 1 set of the SR exhaust hangers or 2 sets. Thanks!
You will only need to buy one set of the hanger kit. They come in pairs.
Is there any hp gains? I'm curious to know if anyone has noticed and increase in power?
I just put the exhaust on my 07' today, sounds amazing and i think it gives you a little more HP, i did notice my throttle response was quicker.
Is it possible to do a Muffler delete on the MAC dual exhaust? And would you recommend using the MAC Muffler Delete Axle-Back Exhaust or just normal pipe?
A muffler delete can be accomplished, but we cannot guarantee fitment with a MAC axleback, additional modifications may be required.
I wanted to do this install myself. Would there be instructions included with this exhaust kit?
The MAC Dual Exhaust Conversion Kit will include instructions, but we also have an online set of instructions, linked below: https://lib.americanmuscle.com/files/40044-20123-cust.pdf
Would it be possible to pair this with a X-pipe? If so what would be the best fit with the best sound to help? Or would it be better to leave it with the Y-pipe?
The MAC Dual Exhaust Conversion Kit would not work with an X-pipe and will only work with the Y-pipes.
The MAC Dual Exhaust Conversion Kit (05-10 V6) is simply just to make your 2006 Mustang V6 have dual exhaust. This exhaust system bolts up to your factory Y Pipe. This would not be considered a True Dual Exhaust because it is all connected to one mid pipe. A True Dual setup, such as Pypes True Dual Exhaust (05-10 V6), item # 20018, (http://www.americanmuscle.com/pypes-2005v6-truedual-catback.html) would get rid of your factory Y Pipe and replace it with an X Pipe, which would make your V6 have a True Dual setup. It is not recommended to go with anything that does not state it fits a V6, just for fitment issues. We offer a plethora of options for True Dual Conversions, which you can find at the link below! http://www.americanmuscle.com/v6-dualexhaust-convokits.html
(approx) 2 Hours
Light to Moderate mechanical skill required.
What's in the Box
|Piping Material:||Aluminized Steel||Tip Material :||Polished Stainless Steel|
|Piping Size:||2.5"||Tip Size:||4"|
|Muffler Type:||Chambered||Fitment:||2005-2010 V6 Mustangs|