Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

Modern Billet Satin Cup Holder Cover - Tri-Bar / Mustang Lettering (10-14 All)

AmericanMuscle no longer carries the Modern Billet Satin Cup Holder Cover - Tri-Bar / Mustang Lettering (10-14 All).

Features & Details

  • Impressive Interior Styling
  • Engraved Tri-Bar Running Pony Logo and "Mustang" Lettering
  • Durable Billet Aluminum Construction
  • Bright Satin - Matches Factory Satin Finish
  • Easy to Install
  • Officially Licensed by Ford
  • Fits All 2010-2014 Mustangs
Impressive Styling. Complete the unfinished appearance of your 2010-2014 S197 Mustang's boring plastic interior with an officially licensed Mustang Satin Cup Holder Lid Cover. This Modern Billet™ Cup Holder Lid Cover matches your Mustang's existing satin accents perfectly for impressive custom styling.

Officially Licensed by Ford. This Modern Billet™ Cup Holder Lid Cover is officially licensed by Ford and features the Tri-Bar Running Pony along with "Mustang" text in block lettering engraved directly into the cover, this is not a cheap decal that will peel off in a matter of months.

Superior Quality. CNC machined from high quality 6061 T6 billet aluminum, this Modern Billet™ Cup Holder Lid Cover is completed in a classic satin finish for a bright brilliant luster.

Easy Installation. Simply peel the two sided 3M tape from the back of the cover and set in place over the stock cup holder door panel for an easy 1 minute install. Go from plain Jane boring stock to award wining custom style in just 60 seconds.

Application. This officially licensed Modern Billet™ Satin Cup Holder Lid Cover with Tri-Bar Pony is designed to fit all 2010 to 2014 Mustangs, including V6, GT, BOSS and Shelby GT500 models.

Modern Billet

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) Cup Holder Lid Cover
  • (1) Alcohol Prep Pad
Installation Info
Tech Specs
Will it fit my Mustang?

    Customer Photos (8) Submit Your Photo

    View All 8 Photos

      Questions & Answers (1)

      1 Top Rated Question

      I've noticed that the cup holder lid is a two piece, is it possible to remove the top of the lid and then install this? Also how much higher does it look once this is placed over the lid, does it stand too much or is it barely noticeable?

      • The Modern Billet Satin Cup Holder Cover will sit approximately 1/4" higher than the existing lid. We have not attempted installing this with the lid disassembled.

      Helpful (0)
      Post Your Question

        Customer Reviews (31) Write a Review

        Overall Rating 4.2

        out of 5 stars

        Installation Time:Less than 1 Hour

        • Fit 4.344828 4.3
        • Appearance 4.724138 4.7
        • Bang For Your Buck 4.137931 4.1



        • 5/5

          May 11, 2019

          Rich and Attractive

          Received this product quicker than expected. Will not be installing in vehicle for a few weeks but the look of the product is very appealing and looking forward to see how it appears after installing.

          LizL

          Year: 2013 Submodel: GT

          Helpful (0)

        • 2/5

          Installation Time: Less than 1 Hour

          May 07, 2019

          Complainted

          Modern billet satin cup holder cover tri bar Mustang lettering. Black paint lettering remove after only one week I'm desapointed about this product

          Cover

          Year: 2014 Submodel: V6

          Helpful (0)

        • 3/5

          Installation Time: Less than 1 Hour

          March 25, 2019

          Shortfalls

          While the quality and appearance are great, this has two major areas for improvement. First, it should be slightly curved to match the cover that it sticks on, and the center tape should be removed. Second, the paint is awful. The paint on the Mustang portion began coming right off in only a couple of days. If this product were really done right, the paint would not be an issue. Rather, it would be of high quality and include red, white, and blue like a proper Mustang logo.

          Ray

          Year: 2012 Submodel: V6

          Helpful (0)

        • 5/5

          Installation Time: Less than 1 Hour

          March 08, 2019

          Very nice

          Fast service good quality. Peel and stick tape on under side. Simple instruction.

          John

          Year: 2012 Submodel: V6

          Helpful (0)

        • 4/5

          Installation Time: Less than 1 Hour

          March 04, 2019

          Looks great!

          It was a little tricky to get completely stuck down. The cupholder cover has a slight curve to it, and this does not. After some light tweaking and applying heat and pressure, it decided to stay. Really flashes it up in here!

          RussS

          Year: 2012 Submodel: GT

          Helpful (0)

        • 4/5

          Installation Time: Less than 1 Hour

          February 04, 2019

          looks nice

          over-priced. looks good though. bla bla bla bla bla

          kenneths

          Year: 2013 Submodel: V6

          Helpful (0)

        • 5/5

          January 24, 2019

          Billet cup holder cover

          Looks great can't wait to install it. Exactly what I ordered. Good quality product.

          BruceA

          Year: 2014 Submodel: GT

          Helpful (0)

        • 5/5

          Installation Time: Less than 1 Hour

          July 20, 2018

          GIVES THE CONSOLE LID A POP!

          In order for a perfect fitment, remove the backing tape and replace it with a 3M tape that's half the thickness. When applying, just allow enough room for the door to open and close properly. If you apply it exactly as designed, the door won't open properly. Very happy with mine!

          StangMan

          Year: 2010 Submodel: V6

          Helpful (3)

        • 5/5

          Installation Time: Less than 1 Hour

          May 11, 2018

          Sharp

          Brings out the focal point of the console Sharp. I can hardly wait to get my next purchase I am s excited with the product American muscle offer I would hope to see some speaker's though,

          AdolphusT

          Year: 2012 Submodel: V6

          Helpful (3)

        • 4/5

          Installation Time: Less than 1 Hour

          September 22, 2017

          Easy Mod

          Looks nice and fits great. Paint the pony bars red white and blue, and it looks perfect.

          NightstalkerV8

          Year: 2017 Submodel: GT

          Helpful (3)

        • 5/5

          Installation Time: Less than 1 Hour

          September 01, 2017

          Modern Billet Satin Cup Holder

          Looks fantastic, easy install, just be careful you give enough space to open the cup holder.

          Joshua

          Year: 2011 Submodel: GT

          Helpful (4)

        • 5/5

          Installation Time: Less than 1 Hour

          August 16, 2017

          Matches dash

          I replaced the chrome cover with this one. The chrome scratches easily, over a period of time looks rough. Removing the old one was done by using fishing wire and a heat gun on low heat. Just like the chrome plate, I had to remove the double sided tape located in the center of the plate/cover. This allows it to sit flat.

          DrisStang

          Year: 2011 Submodel: V6

          Helpful (4)

        • 5/5

          Installation Time: Less than 1 Hour

          July 05, 2017

          Stylish Cover

          I bought the Mustang satin cover for the cup holder. Easy fit in seconds and really adds to the interior look. Love it!

          TRoyer14

          Year: 2014 Submodel: V6

          Helpful (3)

        • 4/5

          Installation Time: Less than 1 Hour

          April 09, 2017

          Use epoxy. Remove the black lettering

          First - I really like the cover after I dealt with its two major design flaws. Just save yourself some time and glue this thing on. The thickness of the 3M tape will wind up causing issues with opening and closing because there's just not that much clearance. Pull it off. I used epoxy which gives you time to place it perfectly and it's not going anywhere. Also - the black powder coating or whatever is used to fill in the lettering and logo will start flaking off. It's not a question of if but when - given that your arm rubs on it constantly. I used a pin and toothpick to remove all of it and it now has a great looking recessed look to it. I'll attach a pic.

          SG

          Year: 2012 Submodel: GT

          Helpful (6)

        • 5/5

          Installation Time: Less than 1 Hour

          January 10, 2017

          Cup Holder no more

          I really like the look but now I can't use my cupholder! The Cover is too thick to lift and drop as the original one does. BUT.... I still love the look!

          Skeetor

          Year: 2014 Submodel: V6

          Helpful (6)

        • 2/5

          Installation Time: Less than 1 Hour

          December 09, 2016

          Black paint smeared over finish

          Black paint from emblem and letters smeared over the finish though the billet is a high quality finish,

          nichenick

          Year: 2010 Submodel: V6

          Helpful (4)

        • 4/5

          September 09, 2016

          Good Looking

          Really looks great, but after a week the back side of it started to come up...............

          BeenThere

          Year: 2012 Submodel: GT

          Helpful (4)

        • 4/5

          July 08, 2016

          Modern Billet Satin Cup Holder

          This mew cover is another great added touch to my upgrades for inside the car. It looks great and was very easy to install. Just took me all of 5 mins. to install..

          MustangGuy

          Year: 2010 Submodel: V6

          Helpful (4)

        • 5/5

          Installation Time: Less than 1 Hour

          July 01, 2016

          Very Nice

          I'm glad I got this item Makes my stang stand out

          DJnadersw

          Year: 2012 Submodel: V6

          Helpful (3)

        • 5/5

          Installation Time: Less than 1 Hour

          June 27, 2016

          Console cover plare

          Pebble finish doesn't show fingerprints and most of all SCRATCHES like the polished chrome one that I replaced with this one . You forearm comes in contact with it.

          Bruce

          Year: 2013 Submodel: GT

          Helpful (5)