Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

Moroso Solid Transmission Mount (87-93 5.0L)

Item 14424
AmericanMuscle no longer carries the Moroso Solid Transmission Mount (87-93 5.0L). Please check out 1979-1993 Foxbody Mustang Transmission Parts for an updated selection.
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P

Features & Details

  • Reduce Vibration and Drive Line Movement
  • 3/16" Steel Construction
  • Intended for Serious Track Use Only
  • Sold Individually
  • Fits 1987 to 1993 5.0L Ford Mustangs
Reduce Vibration. The factory transmission mount uses a rubber bushing that deteriorates over time causing excessive vibration, but a new Solid Steel Transmission Mount will eliminate linkage binding, drive line misalignment, and unwanted transmission movement in race and performance applications.

Quality Construction. Constructed from rugged 3/16" steel with pre-welded studs this Moroso Transmission mount is much stronger than the stock rubber rubber mount and easily installs for a precise alignment and fit. This Transmission Mount also features a yellow chromate finish to prevent rust.

Application. This Moroso Solid Transmission Mount is designed for use on the 1987 to 1993 Ford Mustang with the 5.0L V8 motor. Solid Transmission Mounts are intended for serious track use only.

Technical Note. Solid Transmission Mounts must be used in conjunction with Solid Motor Mounts to prevent breakage of engine block and transmission case due to torsional stress.

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
Hardware included:
  • (2) Two Nuts
Installation Info
Tech Specs
Will it fit my Mustang?

    Customer Photos

      Questions & Answers (6)

      5 Top Rated Questions

      is the mount able to be drilled to fit a 98 gt ?

      • This is not compatible with 1998 models.

      Helpful (0)

      How tall is this solid mount

      • TheMoroso Solid Transmission Mount will be 2.875".

      Helpful (0)

      I have the solid motor mounts is there a difference in the 89 LX convertible where this product will interfere with installation clearances etc.?

      • You will not see any differences in the installation of this Moroso Mustang Solid Transmission Mount for your convertible relative to a coupe. As long as you have an 87-93 with a 5.0 you will be good to go.

      Helpful (0)

      Will this part fit on a TKO-600 installed on a 93 GT?

      • This will not work with a TKO-600, this is designed to work with the stock transmission you would find in your 93GT.

      Helpful (0)

      mixing trans an motor mount can i use this trans mount with the MM solid motor mounts? id imagine so right?

      • You want to ONLY have a solid tranny mount with solid motor mounts. You can break the housing on the tranny otherwise. Happy motoring

      Helpful (0) Show 1 more answer
      Post Your Question
      1 More Question
      ???? Can I use the Moroso Mustang Solid Transmission Mount (87-93 5.0L) on my daily driver???? 3 answers

        Customer Reviews (18) Write a Review

        Overall Rating 4.3

        out of 5 stars

        • 5/5

          June 15, 2019

          Strong and bolt-on

          First of all, if you're worried about how it'll fit, don't be. This went on a pick-up truck with no problems. The Moroso replaced the factory one in exact fit fashion. I received this item about a week ago, and I finally installed it day before yesterday. Right away, I can notice a difference even when simply moving the vehicle, the transmission had some movement before at times. That baby isn't going anywhere now. I will be finishing this upgrade with the Moroso solid motor mounts as well. Great price, all the other solid mounts I saw were much more. I would absolutely recommend this product.


          Year: 1988 Submodel: GT

          Helpful (0)

        • 3/5

          November 09, 2018

          It fits

          Well what can say other than its a solid mount, bolted up with no problems. The welds are not much to look at but hey if your like me you don't care. Knowing your the only one that will see it but the main thing is it gets the job done and is priced well. A solid buy in my book


          Year: 1987 Submodel: GT

          Helpful (4)

        • 5/5

          October 15, 2018

          Solid for sure

          I used this mount on my 351w swap with a c4 tranny.....fits perfect only downside is that to make it work I had to drill one hole a hair bigger but bolted right in after that, considering it was a hit or miss wether it would fit. Quality was was great for 30 bucks well worth it especially if your going solid mounts also


          Year: 1992 Submodel: LX

          Helpful (4)

        • 5/5

          April 25, 2018

          Easy Install

          Great fit, and fits perfectly. Easily installed onto T5.


          Year: 1987 Submodel: GT

          Helpful (6)

        • 5/5

          December 04, 2017

          Easy install

          Installed just like factory. Installed with solid motor mounts and vibration is not bad at all


          Year: 1992 Submodel: GT

          Helpful (7)

        • 5/5

          June 29, 2017


          Works out excellent with solid motor mounts. Shipped quick and got em quick as usual


          Year: 1991 Submodel: LX

          Helpful (7)

        • 4/5

          May 03, 2017

          Solid trans mount

          Fit good only down side for me is it came unfinished. For the price it should at least price painted. But not a big deal. Easy install and I can't tell that my car rides any different.


          Year: 1988 Submodel: GT

          Helpful (7)

        • 1/5

          April 05, 2017

          bad t-5 mount

          anything over 400 hp will break the case, because of using a solid mount


          Year: 1991 Submodel: Other

          Helpful (6)

        • 4/5

          August 28, 2015

          good buy.

          Very easy install. I had to widen the holes a little to mount it to my T5 trans properly but it was no big deal. Feels a lot better then my old worn out rubber mount. Satisfied customer.


          Year: 1992

          Helpful (9)

        • 5/5

          May 29, 2015


          Fit my 1980 like a glove. Ford used the same chassis for over 30 years. Summit and moroso also catalog this part as 1979 - 98 mustangs. Only Solid mount in I could find and American Muscle carried it! Had to have it for my solid engine mounts!


          Year: 1980 Submodel: Cobra OHIO

          Helpful (7)

        • 5/5

          July 23, 2014

          great product

          Great easy to install huge difference. ..thus with solid motor mounts was a huge difference was told not to go solid mounts all around but I'm glad I did


          Year: 1989 Submodel: Other Rochester, NY, USA

          Helpful (8)

        • 4/5

          May 12, 2014

          The King of Transmission Mounts

          The simple one-piece design of this transmission mount is what got my attention. The steel is very thick but formed in an attractive, lightweight package. I'll drill a few holes and have mine powdercoated for a custom look. Great deal.


          Year: 1988 Submodel: GT Dallas, TX, USA

          Helpful (6)

        • 5/5

          April 23, 2014

          great upgrade

          I bought a solid mount to replace my broken rubber one. It goes well with the solid motor mounts I paired them with. You do feel more vibration, but to me the vibrations make me feel more connected to my mustang. I roll 4.56 gears in my Fox and the added assurance that my motor and tranny stay in place lets me concentrate on jamming the gears!


          Year: 1989 Submodel: GT Houston, TX, USA

          Helpful (8)

        • 4/5

          August 27, 2013

          great product easy to install!

          Super easy to install....great fit for worn out mounts...strongly recommend!


          Year: 1989 Submodel: GT Rupert, ID 83350, USA

          Helpful (8)

        • 5/5

          April 19, 2013

          It is what it is!

          Great product exactly what is in the picture, bolts right into your transmission! My car had a nasty vibration driving on the freeway, and this product had eliminated it. Would highly recommend!


          Year: 1991 Submodel: GT San Diego, CA, USA

          Helpful (6)

        • 4/5

          January 18, 2013


          It really holds the tranny in its place you can feel The power put to the ground!


          Year: 1988 Submodel: Other Palo Alto, CA, USA

          Helpful (9)

        • 4/5

          September 05, 2012

          Fits perfect!

          Replaces stock mount with this one, WILL PROBABLY NEVER BREAK!


          Year: 1989 Submodel: GT

          Helpful (7)

        • 5/5

          February 22, 2012

          Great Quality

          Super fast shipping, and the mount even comes with self locking nuts. Gives you a piece of mind later on down the road.


          Year: 1989 Submodel: Other Delaware

          Helpful (7)

        Related Mustang Categories