Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

Holley Performance Chrome Valve Covers (79-95 V8)

Market Price $57.99 You Save 16% ($9.32)
Our Price


FREE Shipping on orders over $49

  • Item 37236

Will this fit your Vehicle?

In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • Clean Styling
    • Thick-Gauge Steel
    • Bright Chrome Finish
    • Sold as a Set of Two
    • Fits 289, 302, and 351W V8 Mustangs
    Clean Styling. Now you can dress up your mustangs mighty V8 motor for a stunning show winning appearance with a set of Holley Chrome Valve Covers from AmericanMuscle.

    Quality Construction. Constructed from thick-gauge steel these Valve Covers are completed in a bright triple chrome finish for a durable long lasting muscle car shine.

    Application. These Holley Chrome Valve Covers are designed to fit Ford Mustangs equipped with a 289, 302, or 351W (Windsor) V8 engine. So now you can go from boring stock to classic muscle for a show winning look.

    Technical Note. Will only fit the EFI equipped 1987-1995 Mustang’s when used with a 1/4" spacer.

    Fitment: 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 Details

    MPN# 37236

    CA Residents: WARNING: Cancer and Reproductive Harm -

    What's in the Box
    • (2) Valve Covers
    Installation Info
    Tech Specs
    Will it fit my Mustang?

      Customer Photos (5) Submit Your Photo

      View All 5 Photos

        Questions & Answers (12)

        5 Top Rated Questions

        Where can I get the ¼ spacers that you need to install if your stang is equipped with EFI system as described on the specs?

        • To install the Holley Performance Chrome Valve Covers on an EFI equipped motor, we would recommend the BBK Factory Intake Manifold Phenolic Spacer Kit, linked below: We carry a wide variety of intake spacers if you have an aftermarket intake manifold. All of the spacers can be seen below:

        Helpful (3)

        Will this fit my 2.3L V4?

        • Hi, These valve covers will only fit on ford 289,302,and 351 V8s.

        Helpful (1)

        What oil caps? What oil caps or breathers do you use on these?

        • You can use your factory oil caps with these valve covers. If you are looking for a Breather instead, I would recommend our Chrome Oil Fill Breather Item #41032 (

        Helpful (1)

        How can these covers accommodate the vacuum hose from the intake to the cover on a 94' Cobra?

        • These valve covers will not have provisions for the line running from the cover to the intake.

        Helpful (0)

        I found my breather for it, but what kind of filler neck tube do we use? Stock cap doesn’t thread?.

        • These valve covers will use the original SBF style filler necks and breathers, similar to the Scott Drake C5AZ-6A868-A.

        Helpful (0)
        Post Your Question
        7 More Questions
        Do these come with gaskets? And if not will the stock gaskets fit? 1 answer
        I have an '86 302 5.0. Will I need a 1/4 manifold spacer? 1 answer
        What is the diameter of the breather holes please, so I know which breather grommets to also order? 1 answer
        Will these work ok with Aftermarket heads with Roller Rockers? Clearance ok? 1 answer
        I am in need of a valve cover set where there are breather holes on both sides and where they are both located at the front of the motor. in the stock pictures shown you have a photo that makes it look like they are both going to be located in the front of the block but then there is another photo that makes it look like they will be on opposite ends. anyone whom bought these can you please up load a picture so I can see how the holes line up thanks 1 answer
        What is there a hole in each of the valve covers? or is the picture of two right hand side valve covers? 1 answer
        Roller Rockers Will these fit GT40P heads with Cobra roller rockers? 1 answer

          Customer Reviews (16) Write a Review

          Overall Rating 4.2

          out of 5 stars

          Installation Time:Less than 1 Hour

          • Fit 3.857143 3.9
          • Appearance 4.428571 4.4
          • Bang For Your Buck 4.714286 4.7

          • 2/5

            April 19, 2019

            Don't fit cobras

            Product is pretty nice looking. Says it fits a 94 5.0 cobra but the reality is they don't. Intake will not fit without denting the cover downward. They also already have some finish issues on the one I didn't have to dent or anything getting rusty. In the long run I wish I kept my stock lower profile cobra valve covers that were slightly rusty because figuring out a filler neck on these has been impossible as well. I pull the breather off and fill through there... no cap fits driver side with cobra intake because there isn't enough clearance. I had to jam a cap in then put intake on


            Year: 1994 Submodel: Cobra

            Helpful (2)

          • 3/5

            April 14, 2019


            I purchased these after reading that these would fit my EFI 5.0V8. The reality is these didn't fit my application, I have AFR heads and Comp Cams roller rockers and the internal baffles of these valve covers hit on the posi-loks. I am now forced to try and remove or modify the baffles because the valve covers do fit under the upper manifold using a 1/2" phenolic spacer, so all I am saying is just be sure of the advice you read Cheers, Steve.


            Year: 1994 Submodel: GT

            Helpful (0)

          • 4/5

            February 15, 2019

            Chrome Valve Covers

            Although nice, would be better if they said Holley, or Ford Racing or anything on them for this engine... 94 5L or 302


            Year: 1994 Submodel: GT

            Helpful (1)

          • 5/5

            January 13, 2019

            Nice for the money

            For the money, they're a good choice. Nice shine. Haven't installed yet but I'm sure they'll be fine.


            Year: 1995 Submodel: GT

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            September 27, 2018

            They fit

            Lines up good, decent clearance on roller R. (Studs) nice shiny crome, two breater holes on opposite ends.


            Year: 1994 Submodel: GT

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            January 20, 2018

            Valve Covers

            I have nothing to say about them they look perfect and they make my engine look wayyyy better I definately will be ordering from here again, i am very pleased


            Year: 1995 Submodel: GT

            Helpful (3)

          • 3/5

            Installation Time: Less than 1 Hour

            July 11, 2017

            thought it was oem

            the product is very nice and impresses espically for the price, only problem is I thought it was oem so when I went for the install I noticed very quickly my stock intake manifold wouldn't fit so I'm really bummed, at a crossroad to re sell or figure out a way to make them work


            Year: 1995 Submodel: GT

            Helpful (8)

          • 5/5

            October 03, 2016

            Fit perfect!!!

            Bought these for a valve cover leak and they are much taller then stock and don't hit the alternator like the last one I bought on eBay did. I used a low profile oil fill cap on the driverside and a tall breather for the passenger side.


            Year: 1994 Submodel: GT

            Helpful (7)

          • 5/5

            Installation Time: Less than 1 Hour

            March 17, 2016

            for the money best thing out there

            I needed a cover that would fit over top of aftermarket rockers, and under the EGR mount on my 95gt, with a 1/2in spacer on the intake these were the only covers that would work for a decent price!


            Year: 1995 Submodel: GT

            Helpful (8)

          • 5/5

            Installation Time: Less than 1 Hour

            August 27, 2015

            Not bad at all!

            They were a little warped on the edges but with nice gaskets there are no leaks. Always get compliments when I pop the good!


            Year: 1993 Whippany nj

            Helpful (5)

          • 5/5

            Installation Time: Less than 1 Hour

            May 14, 2015

            chrome valve covers

            These are the best bang for your buck when purchasing valve covers to dress up the engine bay. The fit is perfect and appearance is flawless. Nice brilliant chrome. I'd recommend this product to anyone looking to shine up your engine.


            Year: 1994 Submodel: GT Wisconsin

            Helpful (6)

          • 5/5

            Installation Time: Afternoon

            October 11, 2014

            Great fit, and PERFECT FINISH!

            These chrome valve covers were put on my Sons 1994 Mustang GT while we were swapping heads and intake to Cobra/GT40 parts. When we opened the box, neither one of us could believe the shine, and "deepness" of the chrome! We were very surprised and pleased with the looks. Installation was a breeze, because the intake was off, the holes all lined up well, and the stock gaskets sealed after heating and re-tightening the bolts. I would recommend these valve covers to anyone who wants to make their small block Ford engine look better.


            Year: 1994 Submodel: GT State College, Pa

            Helpful (6)

          • 4/5

            August 29, 2014

            Crome valve covers

            Looks good only thing I don't like is 2 oil cap holes. Over all a good look had to slightly modify the inner cap to fit 1.7 rockers but happy!


            Year: 1983 Submodel: GT Buchanan Tx

            Helpful (5)

          • 4/5

            Installation Time: Less than 1 Hour

            March 21, 2014

            Great for the price

            The covers were well worth what I paid. They went on pretty easily and look great. Good for anyone on a budget.


            Year: 1988 Submodel: Cobra

            Helpful (8)

          • 3/5

            October 31, 2012

            Good For Money

            For 50$ they look good with my polished intake manifold. Every once in awhile it loosens up a little bit, but all in all it's good if your on a college budget.


            Year: 1988 Submodel: Other Illinois, USA

            Helpful (5)

          • 4/5

            February 27, 2010

            Chrome Covers

            For the money you can not beat them. A big upgrade from factory. Had to rework acouple vacum fittings to use with my gt40 intake, easy fix happy i bought them.

            Robert Bartlett

            Helpful (10)

          Related Mustang Categories