(approx) 1 Hour
Simple installation for anyone.
- Customer Submitted:
- Mustang Gauge Inserts Installation Guide
Hey what’s up everyone I’m Justin with AmericanMuscle.com, and I’m taking a look at a mod that’s sure to freshen up the interior of any New Edge Mustang in a snap, I’m talking about chrome gauge bezels for your 94-04 Mustang. This is another one of those mods that Ford should have taken notes on. Once installed these trim rings look like they should have been factory equipment on every Mustang. The kit includes 6 individual trim rings that simply snap into place over your factory gauges, making for an easy install. Now you will have to remove your factory cluster, which really isn’t all that hard to do and should take you 30 minutes from start to finish. However as always if you have any problems or questions whatsoever, you can always refer to the detailed instructions located on this page. It is worth mentioning that these bezels are compatible with aftermarket gauge inserts such as reverse glow white face gauges. And if you’re really digging the look of the chrome and you want more, then you might want to check out our polished billet aluminum interior kit as well, for a show stopping interior. These rank pretty high on the old bang for your buck meter, for the money spent you can’t match the interior styling impact these give your New Edge Mustang, be sure to check them out.
Subscribe to our YouTube Channel
Features, Description, Reviews, Specs & Installation
Technical Notes. May require splicing.
Fitment: 1996 1997 1998 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 22, 2020
white face gauges look nice and are of a good quality BUT... on my 98 convertible gt it barely fits around the needle trim. You have to slightly force them around the collar. They seem to rub if they move around and are not glued in place. The worst part is the the speedo/ tach section has a connector which comes out the side and does not fit properly. The photos in the instructions show the connector coming out Of the top. Other reviews have also pointed this out and this prevents the lens from sitting flush because it pinched the connector. The bezel rings do not fit securely at all. Especially because the lens does not separate from the bezel so you have to fight to try to grip the rings to put them in place. the rings will not sit flush and Look like they will fall off with time. This is definitely a do not buy and am should consider not selling these.Helpful (0)
October 09, 2018
The way that the wires are routed could be alot better and wish the dimmer worked off the light switch like the stock one didHelpful (1)
September 24, 2013
better than factory!!!!!!!
everything ive bought from AM has been great! these gauge cover and chrome bezels fit great,easy to install and the finished product is awsome!! if youre still thinking just go for it you wont be sorry. cant wait for my next upgrade.thanks american muscle.Helpful (4)
May 17, 2013
looks great but tricky to install
Need to trim plastic to get chrome rings to snap in. Also wiring install could b easierHelpful (4)
December 22, 2012
White Face Gauges
This product looks amazing, problem is that it is not an easy install as one would think. Also, the chrome ring kit doesn't fit that great...Helpful (5)
April 03, 2011
The Gauges & Rings are a great improvement over stock and I'm glad I did it but there a few things to know before install; The gauge faces were a piece of cake to install the only problem I had was with the wring, it should have solid core filament for as thin as it is it was nearly impossible to strip the wires without tearing them. Also with the chrome rings plan on gluing them in place at least mine did not snap in place and I don't think I would have trusted them to stay in place even if they would have,I went ahead and removed my bezel glass to be sure I would not smear glue on my Bezel it's a must, I did it by using my dremel on low speed with a cut off wheel to cut through were it is glued to the bezel just take your time and don't stay at same area or you will start to melt the plastic lens and destort it, all and all I would do the install again just plan on some minor details that I hope this helps anyone else out.Helpful (7)
April 23, 2010
Adds a touch of flash instead of the bland stock gaugesHelpful (5)
December 26, 2009
Mustang White Face Gauges and Chrome Rings
white face gauges look good day and night rings are a pain to install would recomend chrome ringsHelpful (5)
No questions about this product yet.Ask the First Question
(approx) 1 Hour
Simple installation for anyone.
What's in the BoxHardware included: