Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
Mon - Sun, 8:30 AM EST - 11:00 PM EST
Win 1 of 2 $15,000 Mustang Builds! Enter To Win!

Pypes Off-Road X-Pipe (79-95 5.0L)

Market Price $226.99 You Save 12% ($27.00)
Starting At


FREE Shipping
  • Item 20002
  • MPN# XFM10

Local Install Shops

Quoted installation from $125

View 3 Shops

near 19355 (change)

Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.

Will this fit your Mustang?

In Stock Ships same business day.
Ship to: ASHBURN - 20146
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Balance Out Exhaust Gases for More Power
    • Raspy Race Car Growl
    • Pypes Modular Construction
    • For Off-Road, Track Use
    • 2.5" 409 Stainless Steel Tubing
    • Fits 1979-1995 5.0L Mustangs

    Review & Installation Video

    Review & Install Video

    Balances Exhaust Gases.   The Pypes Off Road X-Pipe is excellent when it comes to balancing out the gas pressures in your exhaust system. This Pypes off road x-pipe creates more power and torque than a traditional H-pipe. Why? Because the exiting exhaust pulses are merged at the "X", resulting in less exhaust back pressure for more power.

    Race Car Growl. This free flowing Pypes x-pipe for the 1979 to 1995 5.0's not only increases power, but it also adds a raspy, race car growl to the sound of your exhaust with its modern "X" crossover pipe design.

    Modular Construction.   Pypes unique three piece modular construction makes it quick and easy to add or remove a catalytic converter to your exhaust system in just minutes depending on your driving needs.

    Durable Stainless Steel Construction.   Pypes uses sturdy 16 gauge 409 stainless steel mandrel bent 2.5" tubing for improved flow and features welded reinforcement plates for additional strength.

    Application. This Pypes Off-Road X-pipe is designed to be a direct bolt-on for the 1979 to 1995 5.0L V8 Mustangs with either aftermarket short tube headers or the stock manifolds and a dual catback exhaust installed. Intended for off-road, track use only, does not include catalytic converters.

    Technical note: This x-pipe is designed for off road / track use, and may not be street legal in your jurisdiction. Check local ordinances.

    Fitment: 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 Details

    What's in the Box
    Hardware included:
    • (2) 2.5" clamps
    Installation Info
    Tech Specs
    Mid Pipe Specifications
    Style Mid Pipe: Standard length "X" Type Headers Required: Shorty
    Piping Material: 409 Stainless Steel Piping Size: 2.5"
    Catalytic Converter: "No" - For off-road use only Fitment: 1979-1995 5.0 V8 Mustangs
    Will it fit my Mustang?

    You Might Also Like

    Customer Photos (7) Submit Your Photo

    View All 7 Photos

    More Products You Might Like

    6 Questions / 5 Answers

    Ask a Question

    will this item work with slp1 pipes


    • You shouldn't have any problem using this X-pipe in combination with the SLP Loudmouths. This Pypes X-pipe is a direct replacement of the stock mid-pipe and will bolt up to stock manifolds or shorty headers and a dual catback for your year/model Mustang. Hope this helps!


    Helpful (1)

    Does it meet California emission standards t legal in California ,if i purchase with purchase of flow master 200 series catalytic converter..item #398835. MPN#2000124. Please let me no???Alex ..


    Can I install this straight onto my headers with no cats on an 82 gt mustang.


    • The Pypes Off-Road X-Pipe would install directly to your stock manifolds or shorty headers yes!


    Helpful (0)

    Will these work with full length headers?


    • Hey Brandon, These pipes are meant for shorty headers or he stock manifolds and would require cutting to fit. For full length headers, or longtubes, you would need item#56136 for a fox body and item# 56125 for a 94-95


    Helpful (0)

    Can I use this x pipes with a 351w engine??


    • As long as the exhaust manifolds will be the same length and diameter as the 5.0L then this Pypes Off-Road X-Pipe (79-95 5.0L) should work just fine.


    Helpful (0)

    Catalyic converters? If these pypes have already been installed onto the car, Can the pypes hi-flow catalyic converters be installed afterwards??


    • Absolutely. The 3-piece modular design of this O/R mid-pipe makes it quick and easy to add or remove catalytic converters in minutes. Hope this helps!


    Helpful (0)

    People Who Bought This Item Also Bought

    Customer Reviews (40) Write a Review

    Overall Rating 4.4

    out of 5 stars

    Installation Time:Afternoon

    Installation Cost:$100-$250

    • Loudness / Volume 4.25 4.3
    • Exhaust Note 4.875 4.9
    • Fit & Finish 4.1875 4.2
    • Bang For Your Buck 4.375 4.4

    • 5/5

      May 11, 2018

      Fits great!

      I have a 1991 Mustang gt convertible and it fits really good. The hardest part about putting this on my car was taking the old exhaust off.


      Year: 1991 Submodel: GT

      Helpful (1)

    • 5/5

      Installation Time: Less than 1 Hour

      December 22, 2017

      Pypes x pipe

      Fit really well, bolted right up, good throaty sound


      Year: 1994 Submodel: GT

      Helpful (1)

    • 5/5

      Installation Time: Less than 1 Hour

      November 30, 2017


      Love the x pipes they have a Awesome sound to them and super easy to install


      Year: 1994 Submodel: GT

      Helpful (1)

    • 5/5

      Installation Time: Afternoon

      July 18, 2017

      Great product

      With a a little finess and patience, they fit great!


      Year: 1992 Submodel: LX

      Helpful (6)

    • 5/5

      Installation Time: Afternoon

      July 03, 2017

      Off road x pipe

      Love it ! This product definitely woke up my 94 gt ! The spund is loader and you hear the cam lope better !


      Year: 1994 Submodel: GT

      Helpful (4)

    • 4/5

      Installation Time: Less than 1 Hour

      March 11, 2017

      X pipe

      After three weeks of waiting....I received the correct parts installed everything and it look and sound great.


      Year: 1994 Submodel: GT

      Helpful (4)

    • 4/5

      Installation Time: Afternoon

      November 11, 2016

      fits fine. hangs low as other reviews stated.

      my only complaint would be that it hangs about 3 inches lower than the stock h pipe did and scrapes the ground on driveways. sounds great through magnaflow mufflers.


      Year: 1995 Submodel: GT

      Helpful (6)

    • 2/5

      Installation Time: Less than 1 Hour

      November 08, 2016

      poor fitment and design and pypes knows it

      Bought this a while ago bc of price and decent revIews. Recently put it on and it fits perfect on the pass side but you can almost put a soda can between the pipe and the cross member. It scrapes and runs on everything from slight inclines to speed bumps and also causes fitment issues with the catback. A/M referred me to pypes to call about fitment bc of warranty and they said the xpipes were designed for an automatic and for a manual a small section would have to be cut and welded out of the down section from the header before it bends backwards to the x. They offered no compensation for the extra I'm having to pay for it fit correctly and seemed like they didn't care about the problem either. They even had it noted as an issue and that was the fix. I guess i shoulda bought a bbk or slp. Lesson learned though you do get what you pay for. Next time it will not be pypes I buy.


      Year: 1994 Submodel: GT

      Helpful (6)

    • 5/5

      June 06, 2016

      Great product

      Exactly what I was looking and it was in my price range


      Year: 1989 Submodel: GT

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      May 02, 2016

      Great product

      Love it! Really help open up the power of the 5.0 and was really easy to install


      Year: 1994 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Weekend

      April 24, 2016


      it is a nice xpipe and it has a nice deep ramer to it and it is easy to install


      Year: 1994 Submodel: GT

      Helpful (4)

    • 4/5

      Installation Time: Less than 1 Hour

      April 01, 2016

      Decent but a tad short

      Sounds great has raspy sound not loud enough to get pulled over it Hangs kind of low and notice when installing my old x pipe was about 1/2 inch or so bigger. When installing thing my tail pipe look like there to far in. But nothing alittle modification can't fix. I'd give me 9/10


      Year: 1994 Submodel: Cobra

      Helpful (4)

    • 4/5

      Installation Time: Afternoon

      May 15, 2015

      Looks great

      Great product. Would recommend a lift to install but I did mine in my driveway. Really brought my car alive


      Year: 1995 Submodel: GT Buffalo

      Helpful (5)

    • 5/5

      Installation Time: Afternoon

      September 26, 2012

      nice product

      This x pipe sounds great and definately freed up some horsepower. I would recommend this product.


      Year: 1989 Submodel: GT Lexington, SC, USA

      Helpful (4)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $100-$250

      September 16, 2012

      great pipes

      I have a 1991 mustang lx 5.0 w/ 373 gears t5 tranny short throw / ford motorsports stage 2 racing clutch and matching flywheel ! / 75 mm throttle body and gt 40 intake..... I had high flow cats on a stock H pipe !! i dont need emissions anymore ! i called and ordered/the pipes off road ( x pipe) !!!! not only is it a great price but a great product !~!! i love it !!!!!!nice crisp tone @ 2500 to 6500 !! way cool!!! less noise up front !! quieter at idle, and that race car growl that turns heads ! its a sweet loud ! like N>I>C>E!!!!


      Year: 1991 Submodel: Other massachusetts

      Helpful (1)

    • 5/5

      Installation Time: Less than 1 Hour

      September 27, 2011


      it directly bolted on with no problems. no heating or bending or cutting


      Year: 1992 Submodel: Other burlington, new jersey

      Helpful (4)

    • 3/5

      August 22, 2011

      Pypes off road x-pipe

      It sounds awesome!! but hangs way to low to the ground. It hits the ground everytime I drive the car so I rarely drive it now because I don't want to spend the money fixing it again. I installed it in my garage along with the Pypes headers & it was pretty easy for not having any help, just try to stay out off it when you pass cops cause you will be setting off car alarms from the vibration lol & also have the SLP 1's on it which is where my exhaust stops.


      Year: 1987 Submodel: GT

      Helpful (1)

    • 3/5

      December 13, 2010

      fitment issues

      ive had the x pipe installed for about a year now and ever since i put them on i noticed that they hang really low they are probably 4 inches away from my cross memeber and if i stand away from the car i can see the down pipes from the headers it looks like they need a couple of inches taken off of them but you got to expect that when you pay 180 dollars


      Year: 1980

      Helpful (1)

    • 5/5

      October 06, 2010

      One of my favorite mods yet

      Great product, huge bang for the buck value. The sound is amazing and it feels like I picked up a few HP on the top end with very little to no loss of low end TQ. I'm running a Mac catback with chambered mufflers and full tails, stock headers, stock motor with some bolt ons. This X pipe has a mean, throaty grow at midrange RPM and flat out screams on the top end, but it's actually quieter than an off road H pipe when driven gently. No more waking up the neighbors or attracting unwanted attention on the street. Got rid of 90% of the annoying drone present at 2000 RPM with any of the H-pipes I tried previously (stock catted, high flow catted, and off road). Great product, my only complaint is that I have the older style with a stock-style flange on only one side and it hangs too low coming off the driver's side header, scrapes tall speed bumps sometimes. Hopefully this newer version is better, eventually I may try one to find out.

      Alex L

      Helpful (13)

    • 4/5

      August 10, 2010

      pypes x pipe

      simple and easy install. good quality but hangs a little low. but sounds amazing!!!


      Helpful (1)

    Related Mustang Categories