$7,000 Summertime Mustang Build Enter Now!
Talk to a Mustang Expert
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

MMD Convertible Styling Bar - Charcoal (05-14 GT, V6, GT500)

Market Price $384.95 You Save 9% ($35.00)
Our Price


FREE Shipping
  • Item 41105
  • MPN# 41105

In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Great Custom Styling
  • Dark Charcoal Grained Texture
  • Durable Urethane Vinyl Exterior
  • Tubular Steel Construction
  • Fits All 2005-2014 Mustang Convertibles

Review & Installation Video

Review & Install Video

Hey, Justin from AmericanMuscle.com and today I’m going to be taking a closer look at this convertible styling bar from MMD for all 2005 and up convertible Mustangs. This very budget friendly styling bar from industry leading MMD is a perfect option for someone who wants just a simple bar without all the bells and whistles of more expensive options. Now what you can expect from this bar is strong tubular steel construction wrapped in a dark charcoal vinyl material, which besides being weather resistant, really matches that OEM interior perfectly. Now besides matching your car’s interior very well this bar also fits perfectly on your ride, even with the top up. Getting the bar installed should only take you a couple of hours, just because you have to slightly disassemble your rear interior. While it’s nothing more than popping out a couple of tabs or moving a couple of 10mm bolts, you will need to drill a 2” hole through this upper trim panel, just so the styling bar can go through it, so make sure to have a 2” hole saw on hand before you get started, and be sure to take your time. I have seen many ‘vert owners on this site pair this styling bar up with MMD’s wind deflector for a very functional and stylish package. So if you’re looking for a great entry level styling bar that serves its purpose of looking good, for a price that’s hard to beat, then you’ll definitely want to check out this bar from MMD.

Custom Styling. A Modern Muscle Design Styling Bar will add great custom styling to your 2005 to 2014 convertible S197 Mustang. The MMD Convertible Styling Bar was designed to complement the lines of the S197 perfectly and fits neatly under the factory rag top in nasty weather.

Superior Quality. Constructed from strong tubular steel the MMD Styling Bar is wrapped in a durable weather resistant dark charcoal urethane vinyl and features the same grain texture as the Ford OE interior for a perfect match.

Application. The Modern Muscle Design Styling Bar fits perfectly on all 2005 to 2014 convertible S197 Mustangs, including the V6, GT, and 11-12 Shelby models.

Technical Note: This Styling Bar does not provide roll over protection, and does not have an integrated third brake light.

Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details

What's in the Box
Hardware included:
  • (2) Two mounting brackets
  • (8) Eight allen head screws
  • (8) Eight hex nuts
Installation Info
Tech Specs
Will it fit my Mustang?
  • GT - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14
  • V6 - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14
  • GT500 - 07, 08, 09, 10, 11, 12, 13, 14

People Who Bought This Item Also Bought

Most Helpful Reviews

looks great

Install was easy, fits under top with no problems, everyone thinks it's factory.

Helpful (1)

This product was easy to install.

I installed the product on my 2013 Mustand in less than an hour using some short cuts I read about on this site. First I took a long time to review the instructions and got all my tools together before ...

Read More
Helpful (2)

Overall Rating 4.6 out of 5 stars
Read All 100+ Reviews

Customer Photos (100+) Submit Your Photo

View All 100+ Photos

You Might Also Like

11 Questions / 9 Answers

Ask a Question

will the MMD styling bar fit with Cervin's speedster covers


  • Cervini's has styling bars on their models with the speedster covers as well. I dont think you'd have an issue.


Helpful (1)

Is this strong enough if the car rolls


  • The MMD Convertible Styling Bar is simply for appearance. It will not assist in the stability of the car in the case of an accident.


Helpful (0)

Would I be able to use this as a harness bar? It's been hard to find one that will work with the convertible top and the 5 point harness that I wish to install requires one


  • We do not recommend using any styling bar as a means to attach harnesses. This can be extremely dangerous. If you are having trouble finding one, I suggest seeing if a shop can custom make one for you.


Helpful (0)

How long does it take to install this and I have the black leather interior and wondering how well the color will match? Thanx!


  • The MMD Convertible Styling Bar - Charcoal (05-14 GT, V6, GT500) will take about 4 hours with someone who has light to moderate mechanical skill. As far as the color this will be a dark charcoal grained texture.


Helpful (0)

had the style bar installed however it does not sit flat like the ones pictured. the front of the bar sits on the cover nearest the door and goes upward from there. Thought maybe it was install backwards reversed it and still no joy. George W. Rausch


  • I am sorry to hear about the trouble you are having with your styling bar. Please contact us at your earliest convenience so we can try to assist you! http://www.americanmuscle.com/contact.html


Helpful (0)

Rearview visibility issues? Our '14 black 'Stang is my wife's pride and joy. Her only hesitation about this bar is the possibility that it will obstruct her rearview vision. Have there been any comments or complaints about obstructed vision?


  • Zero obstruction. Get a windscreen with it


Show 3 more answers Helpful (0)

More Products You Might Like

Customer Reviews (100+) Write a Review

Overall Rating 4.6

out of 5 stars

Installation Time:Afternoon

Installation Cost:$100-$250

  • Fit 4.171975 4.2
  • Appearance 4.670886 4.7
  • Bang For Your Buck 4.531646 4.5

  • 4/5

    Installation Time: Afternoon

    April 16, 2017

    2013 Mustang V-6

    The bar arrived well packaged and was installed using the supplied instructions and YouTube videos. The install went smoothly, however, I used a 1-1/2" hole saw rather than the 1-1/2" suggested. I gave it four stars because of some manufacturing inconsistency between the left and right side of the bar, not horrible but noticeable. Also, the gap where the bar meets the car needs some type of filler which I'm sure I'll figure out. Even with my picks, the bar puts the Mustang in another dimension and is a worthwhile install.


    Year: 2013 Submodel: V6

    Helpful (1)

  • 1/5

    Installation Time: Afternoon

    March 21, 2017

    Poor fit.

    Was meticulous when installing. Read the reviews and heeded all the tips. Even made own template for drilling of interior panels etc. OK, now for the placement of bar into fittings w/all interior panels reinstalled. Everything is going perfectly, But, UGH! Once bar is slid all the way down, there's a huge gap approximately 1/3 of the way around, on each side, where bar meets the interior panel. Can even see the inner pipe of the bar on drivers side. Super disappointed.


    Year: 2007 Submodel: GT

    Helpful (1)

  • 3/5

    September 29, 2016

    Looks great after some work

    I the template did not line up right when I did the install and the holes were off. Also the bar need some coxing to get it fit into place. However, after getting it installed it looks great.


    Year: 2010 Submodel: GT

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    February 25, 2016

    You get what you pay for

    While it is really easy to install ,The bar has a 1/4 gap on the rear side of both sides of the bar. The frame attachments are straight but the steel bar inside the foam is not. Can bend only so much, still a gap. Might try to make a rubber spacer but should not have too. Not sure if all of these bars are like this or just mine, but if you look close at pictures on A.M. you can see a gap. Also after putting on the frame part, put the plastic part of body from car over it in place and mark hole to drill. You do not need as big of a hole as in directions, you can trim a little at a time with a razor, side 1 big hole side 2 perfect. the holes are not visible either way.


    Year: 2012 Submodel: V6

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    December 22, 2015

    Does not fit flush !

    The install was super simple and took less than an hour. The gap is large between the bar and the car, but nothing black caulking won't solve. The template for cutting the large hole was way off on my 2014 Mustang, AM needs to look at this problem. Otherwise I like the look.


    Year: 2014 Submodel: V6 Huntington Beach, CA

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    May 17, 2014

    Like it, but doesn't fit like a glove..

    I ordered this item and installed it and noticed a small mark on it and that it didn't fit perfect. AM was quick to replace it, but the new one still wasn't a flush fit...but overall I still like the item


    Year: 2012 Submodel: GT Detroit, MI, USA

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    July 30, 2013

    looks great

    Install was easy, fits under top with no problems, everyone thinks it's factory.


    Year: 2014 Submodel: GT Plant City, FL, USA

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    July 22, 2013

    disappointed in my styling bar

    Very easy to install,it only took 90 minutes to install,but only after 2 weeks the finishing seal below is off and hanging.The joint was badly glued and in addition it is too short and impossible to re-install. The bar doesn't fit perfectly on one side,there's a quarter inch gap between the bottom of the bar and the panel. Dispite all these problems,I love the look it gives.


    Year: 2013 Submodel: GT L'Ancienne-Lorette,QC,Canada

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    June 25, 2013

    Fit great -- Appearance average

    The install and fit were easier than expected. The appearance of the product was less than desirable. The underlying material used to contour the bar was not uniform -- looks as if someone applied the material to the steel bar by hand and eye and then covered it with the vinyl. It has a lumpy look close up.


    Year: 2012 Submodel: V6 Ocala, FL, USA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    January 10, 2013

    This product was easy to install.

    I installed the product on my 2013 Mustand in less than an hour using some short cuts I read about on this site. First I took a long time to review the instructions and got all my tools together before starting. The seat bottom popped out in less than a minute, seat back took a few minutes to pop out after taking out the two bolts. Panels pulled apart quickly, (take your time and go slowly, not forcing anything). Took out the seat belt bolts and placed styling bar holders in place with one of the removed screws. Holes drilled quickly (I used a punch before drilling). Retaining bolts went in quickly. Now, I placed paint on the top of the bar holder and placed the panel on top to get a mark for drilling. I also used a 1 and 5/8 hole saw for a smaller hole and it worked well. Did have a friend help me with placement of styling Bar . All went well and it looks great.


    Year: 2013 Submodel: V6 Perry Hall, MD, USA

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    February 25, 2012

    Looks great and very easy install....dont use template

    Took in 1hr and 20 min start to finish and that was with a vac of whole back area. Dont take out top of seat and just pull side panels out enough to get drill behind. Once bracket is installed put panels back on then put daps of paint on top of bracket. Then put top trim pc on and push down. thn remove trim pc and look at bottom and you will have exact area to cut. Very easy!!!


    Year: 2011 Submodel: GT Paramus NJ

    Helpful (2)

  • 5/5

    October 28, 2010

    styling bar

    should have done this last year,looks great,easy install,


    Helpful (3)

  • 5/5

    September 06, 2010

    style bar

    Product as advertised. Looks great, adds a nice touch giving a more aggressive look. Installation is easy.


    Helpful (3)

  • 5/5

    July 27, 2010

    Style Bar

    I am very pleased with the style bar. Easy to install


    Helpful (3)

  • 5/5

    June 16, 2010

    good service

    his very good product ,service and shipping delay very good thank you ,see you soon .

    marc dupuis

    Helpful (3)

  • 5/5

    May 16, 2010

    Stock Racing Convertible Mustang Bar

    Fast Shipping and great product, Easy installation by Dealership (2HRS). Great quality and great look. Very satisfied. Great investment. My 09 Mustang looks awesome. Thanks.


    Year: 2009

    Helpful (3)

  • 5/5

    March 19, 2010


    Great item for anyone with convertable. Just the style and look I was needing.


    Helpful (3)

  • 5/5

    May 12, 2010

    Stack Racing Convertible Mustang Styling Bar

    Fast shipping, perfect color match, easy to install per instructions... Took about 1 hour, could be done faster now that I know how trim is attached..... Great quality for price, I would recommend to anyone...


    Helpful (11)

  • 5/5

    March 07, 2010


    I love the look of this bar on our mustang! Great price and WOW this should be added to every convertable. Install time was about 45 min and very easy. Thanks for a great product!

    Pete & Bettie

    Helpful (7)

  • 5/5

    June 16, 2010

    Stack Racing Bar

    I pre-ordered this for Father's day, thinking it would take a little bit of time to arrive, it came within 2 days. WOW. The installation instructions guided me to a very easy install. I ordered the non wired one, who needs a 4th brake light anyway. I do wish I could use it to have a dome light in the back, though. Only issue I had was with the template to cut the trim panels, it didn't line up for me so I didn't use the template.

    Jason Purcell

    Helpful (7)

Related Mustang Categories