Free Shipping On Orders Over $49. Details

Talk to a Challenger Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 In Store Credit Enter Now

SR Performance Cold Air Intake (08-10 5.7L HEMI, 6.1L HEMI)

Item CH1045
AmericanMuscle no longer carries the SR Performance Cold Air Intake (08-10 5.7L HEMI, 6.1L HEMI). Please check out Dodge Challenger Cold Air Intakes for an updated selection.
Call a Challenger Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Improves Airflow for More Power
    • Increases Throttle Response and Performance
    • Polished Aluminum Intake Tube
    • Reusable High Flow Air Filter
    • Simple Bolt-On Installation
    • No Computer Re-Tune Required
    • Not CARB Certified
    • Fits 2008-2010 5.7L and 6.1L V8 Dodge Challenger Models

    Description

    Better Flow for More Power. An excellent way to improve the power and performance of your already powerful 2008-2010 5.7L ot 6.1L Dodge Challenger is by installing a SR Performance Cold Air Intake. By replacing your Challenger's restrictive stock factory intake with a high flow filter assembly you will see and feel a noticeable increase in rear wheel horsepower and torque. This SR Performance Intake not only improves airflow for an increase in power, but it will also add a show winning appearance to the engine bay with its brightly polished aluminum intake tube.

    No Tune Required. SR Performance engineered their Cold Air Intake to improve the performance of your V8 Challenger without the need of reprogramming your computer. By utilizing flow dynamics, this Intake will increase power using the original factory tune. Even though a re-tune is not required for operation, AmericanMuscle recommends a custom tune to reprogram the vehicles computer (ECU) to get the best possible performance from this Cold Air Intake.

    Reusable Air Filter. The included high flow air filter effectively filters out power robbing particles with its multi layer design. The specially treated media creates a sticky surface to capture microscopic contaminants before they can enter your Challenger's engine and do harm. Seeing that the filter is reusable there is no need to buy a new filter every few thousand miles. You can just clean the filter, re-oil it, and reinstall - saving yourself money in the long haul.

    Simple Bolt-on Installation. SR Performance designed their Cold Air Intake kit to be a direct bolt-on replacement. With no special tools or extra modifications required installation can be completed in under an hour. All parts and detailed instructions are included.

    Not CARB Certified. This SR Performance Cold Air Intake is not CARB certified, therefore it is not legal for use in California or other states adopting California emission standards. Not legal for use on pollution controlled motor vehicles; intended for off road use only.

    Application. This SR Performance Polished Cold Air Intake System is specifically designed to fit the 2008-2010 Dodge Challengers equipped with the 5.7L or 6.1L V8 engine.

    SR Performance

    Fitment: Details

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Intake Tube
    • (1) Heat Shield
    • (1) Air Filter
    • 52-inch Rubber Seal
    • (1) 4-inch Flex Coupler
    • (1) 90 Degree Coupler
    • (1) 5/8-inch Breather Hose
    • (1) 3.5-inch Hose Clamp
    • (3) 4-inch Hose Clamps
    • (1) 1/2-inch ID Grommet
    • (1) 4-inch Offset Velocity Stack Adapter
    • (1) 6-inch Hose Clamp
    4.4

    Customer Reviews (100+)

      Reviews of SR Performance Intake products have an average rating of 4.4 out of 5

        Questions & Answers

        10 More Questions

        Will It Fit My Challenger

        • R/T - 09, 10
        • SRT8 - 08, 09, 10