Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter daily!
Win $3,000 in Roush Blackout Mods! Enter Daily!

SR Performance Off-Road H-Pipe (05-10 GT w/ Long Tube Headers)

AmericanMuscle no longer carries the SR Performance Off-Road H-Pipe (05-10 GT w/ Long Tube Headers). Please check out 2010-2014 Mustang X-Pipes for Long Tube Headers for an updated selection.

Features & Details

  • Improves Exhaust Flow for an Increase in Power
  • Classic Muscle Car Rumble
  • Off-Road Shorty H-Pipe Design
  • Deletes Catalytic Converters
  • 2.5-inch Mandrel-Bent Tubing
  • 16-Gauge 409 Stainless Steel Construction
  • Intended for Off-Road or Track Use Only
  • Designed for use with SR Performance Long Tube Headers
  • Fits 2005-2010 GT Mustang Models
More Power And Performance. Add even more horsepower and torque to the rear wheels of your 2005-2010 GT Mustang by eliminating those power robbing catalytic converters with a SR Performance Off-road shorty H-Pipe for power you can feel throughout the RPM band. This Shorty Off-road H pipe when combined with a set of SR Performance Long Tube Headers will greatly improve your 4.6L V8 Mustang's exhaust flow to increase horsepower, torque and overall performance.

Muscle Car Rumble. This free flowing SR Performance Mid Pipe for your 2005-2010 4.6-powered GT not only increases power, but it also adds a deep muscle car rumble to the sound of your exhaust with its classic "H" crossover pipe design.

Deletes Factory Cats. SR Performance designed their Off-Road H-Pipe to eliminate your Mustang's restrictive stock catalytic converters. Because of this, this H-pipe is not CARB certified, therefore it is not legal for use in California or any other state adopting California emission standards. Not legal for use on pollution controlled motor vehicles; intended for off road use only.

Stainless Steel Construction. This SR Performance H-Pipe is constructed from mandrel bent, 2.5-inch diameter, 16 gauge 409 stainless steel tubing for its durability and long lasting corrosion resistance. With smooth, precise mandrel bents, this SR Performance Off-road Mid-Pipe features a "H" crossover design for superior exhaust flow.

Application. This SR Performance Shorty Off-road H-Pipe is specifically designed to fit the 2005-2010 GT Mustang models with SR Performance Long-Tube Headers installed. Intended for off-road use, does not include catalytic converters.

Fitment: 2005 2006 2007 2008 2009 2010 Details

MPN# 404913

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) Off-road shorty H-pipe
  • (2) Down pipes
  • Installation hardware
Installation Info
Will it fit my Mustang?

    Customer Photos

      Questions & Answers (5)

      5 Top Rated Questions

      Will this fit without long tubes? so i can just go ahead and get it welded on and get the long tubes later ?

      • This will not work without long tube headers as there will not be enough pipe to connect to the headers then.

      Helpful (0)

      Does that work with bbk long headers ?

      • With long tube headers, you will need to get the same brand shorty mid-pipe as the header for proper fitment.

      Helpful (0)

      Can this h pipes work with bbk long header ?

      • We recommend the BBK mid-pipes as they are guaranteed to fit. With the SR, we are unable to guarantee fitment.

      Helpful (0)

      How do these connect to the SR Performance Long-tube Headers? Am I supposed to weld them or buy aftermarket clamps?

      • Welding should not be required. The h-pipe will bolt right up to the headers.

      Helpful (0)

      How do you connect the H-Pipe to the Headers since there are no flanges to bolt them together? Am I supposed to weld them together?

      • For headers and mid-pipes, we highly suggest going with matching manufacturers to ensure proper fitment.

      Helpful (0)
      Post Your Question

        Customer Reviews (2) Write a Review

        Overall Rating 3

        out of 5 stars

        Installation Time:Afternoon

        • Loudness / Volume 3.5 3.5
        • Exhaust Note 4 4
        • Fit & Finish 3 3
        • Bang For Your Buck 3 3



        • 1/5

          Installation Time: Afternoon

          February 03, 2019

          You get what you pay for.

          Poor quality. Midpipe arrived and ends were warped which caused for a terrible fit and finish. Welds were scabby. Dont cheap out, go BBK or Pypes or better yet go to your local muffler shop and get custom. Very disappointed.

          NathanK

          Year: 2007 Submodel: GT

          Helpful (2)

        • 5/5

          Installation Time: Afternoon

          December 08, 2018

          Awesome product

          Sounds better and runs better after installing this on my 2007 mustang gt !!!!

          VictorM

          Year: 2007 Submodel: GT

          Helpful (11)

        Related Mustang Categories