Installation Time: Full Day
July 04, 2016
Quality stainless, straight through exhaust
I mostly got this for the performance aspect as I turn up the boost, but also to get at least some noise out of the pickup. I knew that the 3.5L ecoboost V6 wasn't going to sound like a V8, The sound at idle and cruise is a bit ricey, but WOT sounds sick. The kit itself is a "one size fits all", fitting a supercrew with 6.5" bed and everything shorter, the long tube must be cut for the shorter trucks which, in my opinion, is better than clamping in an extra section, but I wasn't prepared for that so I had to abandon my first install attempt and get some metal cutoff blades for my angle grinder. The included instructions tell you how much you need to cut off from the end for your wheelbase, besides that, there was some damage on the end of one of the pipes which was easily rounded out and at least one of the accuseal/exhaust hangers was out of round and required some muscle to fit over the pipe. The accuseal/hangers were marked with their location which made things easier. Once on and tightened, I forgot all about the minor hassles.