Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!

Steeda Tubular Radiator Support (05-10 GT, V6)

AmericanMuscle no longer carries the Steeda Tubular Radiator Support (05-10 GT, V6). Please check out 2005-2009 Mustang Radiators, Hoses and Accessories for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Stronger and Lighter Than the Stock Support
  • Durable Silver Metal-Flake Powdercoated Finish.
  • Made from Tubular Chromoly Steel for Strength.
  • Installs with Factory Hardware.
  • Fits 2005-2010 Mustangs.
Light Weight. Drag racers know reducing weight from your pony results in lower elapsed times. That is why Steeda made this 2005-2010 radiator support from tubular chromoly steel that is half the weight of the stock steel unit and yet is still strong enough for you to run your front swaybar when not at the Drag Strip!

Modern Tubular Design. Steeda Lightweight Radiator Support is not only designed to reduce weight from the front end of your 2005-2010 Mustang, but with it's modern tubular design it is stronger than the stock support. And the Steeda Lightweight Tubular Radiator Support is the only one on the market today that allows you to maintain your front swaybar and reduce costly weight at the same time.

Fit and Finish. Steeda Engineers crafted this Radiator support from super strong and light weight 4130 Chromoly steel that is Tig welded for extra strength. And if that was not enough they then powdercoat the support in a silver metal flake for a durable finish and good looks. This Radiator Support accepts all stock hardware, unlike the competition.

Note: Coupon codes cannot be applied to this product.

Note. Will not fit the Shelby GT500.

Fitment: 2005 2006 2007 2008 2009 2010 Details

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Radiator support bar
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (9) Submit Your Photo

View All 9 Photos

More Products You Might Like

Questions & Answers (2)

2 Top Rated Questions

Well it sounds like it will fit around a 5.0 my question is what would this truly be in the way of that is made different from the GT500???

  • The Steeda Tubular Radiator Support (05-10 GT, V6) is designed to fit the 05-10 Gt, V6 only. With the GT500 there are many upgrades as far as motor and suspension that are done unlike the standard GT and V6 mustang.

Helpful (0)

Will this support fit other common aftermarket radiators? Will it fit with an aftermarket radiator like mishimoto or ford racing?

  • It only has two mounting points where the radiator actually touches. So anything that retains stock mounting points will fit. Judging from the Mishimoto radiator reviews, the stock radiator support works.

Helpful (0)
Post Your Question

People Who Bought This Item Also Bought

Customer Reviews (14) Write a Review

Overall Rating 4.9

out of 5 stars

Installation Time:Afternoon

Installation Cost:0-$100

  • Performance Gain 3.444444 3.4
  • Fit 4.888889 4.9

  • 5/5

    Installation Time: Less than 1 Hour

    November 07, 2016

    Easy install

    Easy install great weight reduction mod as well as a stiffer front end would totally recommend especially if your trying to drop weight from your stang


    Year: 2006 Submodel: GT

    Helpful (5)

  • 5/5

    Installation Time: Less than 1 Hour

    April 29, 2016

    Perfect Fit, Easy Install

    My Procharger intercooler brackets and bolting held my radiator in place while I changed the radiator support out so for me, it was super easy. This gave me a lot more room for my Procharger intercooler piping. This was the answer I was looking for to get the room I needed. The reduced weight and good looks are just a plus.


    Year: 2006 Submodel: GT

    Helpful (5)

  • 5/5

    Installation Time: Afternoon

    June 30, 2014

    Lose ten pounds in an hour!

    The fit and finish of this product-my first Steeda product and first real upgrade to my S197 V6-is near perfect. The welds look great and the powder coat is flawless. Installation couldn't be simpler. Just make sure to have a pair of jack stands as well as the correct socket sizes handy. If you have a lift, this install will probably only take a few minutes. While you won't notice any performance gain by itself, this really cleans up the underside of your ride and makes room for future mods. Further, coupling this with rear seat delete, aluminum driveshaft, lightweight flywheel, or other weight reducing mods is going to provide a measurable increase in gas mileage as well as noticeable performance gains. My only minor nag is that the old brake/power steering lines do not follow the awesome contour of this bar. However, that's an OEM issue and not a Steeda issue. Use the included zip ties and tuck the lines out of harm's way.


    Year: 2007 Submodel: Other Dallas, TX, USA

    Helpful (6)

  • 5/5

    Installation Time: Less than 1 Hour

    February 07, 2014

    Awesome Product!

    This Steeda part is well made and fits perfectly. Install was a piece of cake, less than an hour. There's a significant weight difference you can tell when comparing to the stock piece, not to mention all the extra clearance. I chose this one over the other brands due to it being made of chromoly rather than mild steel. I would recommend this part to anyone looking to shave some weight off at the most beneficial area, all the way up front.


    Year: 2005 Submodel: GT Cape Coral, FL

    Helpful (5)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: 0-$100

    July 04, 2013

    Good product

    The product fits good looks good. I would recomend this to other people.


    Year: 2005 Submodel: V6 Greensboro, NC, USA

    Helpful (5)

  • 5/5

    Installation Time: Less than 1 Hour

    April 01, 2012

    A piece to the puzzle

    You won't notice the difference but this is a piece to the puzzle when you want to do some weight savings. Not to mention it gives you a lot of extra room under the car which is always nice!


    Year: 2009 Submodel: V6 White Plains, NY

    Helpful (4)

  • 4/5

    Installation Time: Afternoon

    January 25, 2012

    Simple to Install

    This product was a straight forward install. When comparing the new and old bar, you can see how big of a difference they are. One note: when installing the steeda bar, it's helpful to have a second hand to hold up the bar. I used a floor jack to hold the bar in place while I got the bolts on.


    Year: 2010 Submodel: V6 Plano, TX

    Helpful (6)

  • 5/5

    Installation Time: Afternoon

    December 08, 2011

    Diet plan for your Mustang

    Another excellent part offered by Steeda and American Muscle. Support looks great, bolts right in and shaves 10 pounds off the nose. My GT is in storage for the winter, but will be able to see how much the weight loss helps at the track and on the street once spring gets here. The only thing I didn't like about the support is the bright silver powder coat. I stripped the support and painted it lo gloss black so it doesn't stand out so much.


    Year: 2007 Submodel: GT Mansfield, PA

    Helpful (5)

  • 4/5

    Installation Time: Afternoon

    December 07, 2011

    Excellent fit and finish, I recommend the Steeda Light Weight Radiator Support without hesitation.

    There are a number of light weight radiator supports available for the S197 Mustang. However, the Steeda support is the only one currently available that gives you the option to continue to use your OEM or aftermarket sway bar. The weight savings over the OEM support is significant and the fact that the Steeda support takes up less space therefore making more room available is truly an added bonus. Quality of the welding and powder coating were both excellent. Installation was straight forward following the comprehensive instructions included. I recommend the Steeda Light Weight Radiator Support without hesitation.


    Year: 2008 Submodel: GT King City, Ontario, Canada

    Helpful (5)

  • 5/5

    October 14, 2010

    Better grasp

    Bought this for my B-day & took it out & i could feel the front end was a tad lighter & the car seemed to even accelerate a little better as well...very plz'd with this product. Good job to Steeda & AM for reducing weight


    Helpful (6)

  • 5/5

    August 06, 2010

    Great Product

    Ordered from AM and as usual got it within 2 business days! I can't say I noticed any difference vs the stock piece after installing this item, but that's a big positive! This thing weighs half of what the stock piece weighs and offers the same stiffness. I had to use both hands to take the stock piece out but could lift the Steeda support up with one. Everything lined up correctly and it took less than an hour to install. If you care about trying to lose some weight this is a must - it takes off the weight from the very front of the car!

    James Y

    Helpful (14)

  • 5/5

    May 24, 2010


    This brace is so much lighter, stiffer, and nicer than stock. I installed it in about 35min. Just needed a hand putting it in cause the radiator slid down a little but other than that, i can tell a good difference in acceleration cause the front end is lighter now! Good Product AM!!!


    Helpful (4)

  • 5/5

    December 29, 2009

    easy install

    Definetly lighter than stock and easy bolt on


    Helpful (5)

  • 5/5

    May 07, 2009


    Very solid piece. The stock radiator support weighs 19lbs and this steeda weighs 8lbs. And it still retains your swaybar for street driving!! Bumps in the road feel more solid...very very pleased with this product..


    Helpful (11)

Related Mustang Categories