Increases in Horsepower and Torque.
Replace the restrictive factory air box and paper filter of your Coyote powered 2015-2017 GT Mustang with a Steeda ProFlow Cold Air Intake for impressive rear wheel increases in power and torque with no tune required.No Tune Required.
Unlike other Cold Air Intakes on the market for the Coyote powered Mustangs, the Steeda CAI does not require a computer re-tune when installed with the included "Restrictor Insert". The Restrictor Insert can be removed for off-road use when combined with a custom tune. By utilizing state of the art computer-aided designs, Steeda Cold Air Intakes offer unmatched fit, finish and power!Unique Design.
Steeda engineered their intake to retain the factory cold air ducting from the front grille for optimal air flow. A soft, durable rubber gasket is included to seal the Steeda air box tight against the hood. This prevents hot air from entering the intake for noticeably lower intake temperatures. The ProFlow intake tube features a provision to retain the factory sound tube, but also includes a block off cap for those looking to delete it entirely.CNC Mass Air Housing.
This ProFlow Cold Air Intake features a precision CNC machined mass air housing that provides the cleanest mass air signal available on the market. A clean MAF signal results in smooth, reliable off-throttle to on-throttle response. Includes housing only, MAF sensor is not included.Reusable Nanofiber Air Filter.
Included with this Proflow Cold Air Intake is a high flow reusable nanofiber air filter, that provides excellent filtration of harmful power robbing dust particles. Seeing that the filter is reusable there is no need to buy a new filter every few thousand miles. You can just clean the filter, re-oil it, and reinstall - saving yourself money in the long haul.Made in the USA.
Manufactured in the USA from roto-molded high quality ABS plastic for outstanding durability and heat insulation, this ProFlow Cold Air Intake Tube provides smooth unrestricted airflow. The exterior of the intake tube features a fine satin texture finish that adds an intimidating appearance to your GT's engine bay.Straight Forward Installation.
The Steeda ProFlow Cold Air Intake Kit is designed to install easily with just basic hand tools. No extra modifications or special tools are required for proper installation. All necessary parts and instructions are included.Recommended Upgrade.
Even though a re-tune is not required for operation, AmericanMuscle recommends a Bama Custom Tune with a Mustang Handheld Tuner
to reprogram the vehicles computer (ECU). This will help to get the best performance possible out of this cold air intake.Application.
This Steeda ProFlow Cold Air Intake System is specifically designed to fit the 2015-2017 GT Mustangs equipped with the 5.0L Coyote V8 engine and does not
require re-tuning of the vehicles computer for operation when installed with the included restrictor insert.
Technical Note. This Steeda Cold Air Intake is not legal for use in California or any other states adopting California emission standards. Intended for off-road track use only.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov