Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

Steeda Offset Steering Rack Bushings (85-04 All)

Item 16132
AmericanMuscle no longer carries the Steeda Offset Steering Rack Bushings (85-04 All). Please check out Mustang Suspension Bushings for an updated selection.

Features & Details

  • Reduces Bumpsteer
  • Improves Handling
  • Quicker, Crisper Steering Response
  • For Lowered 'Stangs
  • Set of 4 Polyurethane Bushings
  • Fits 1985-2004 Mustangs
Offset Design. If you have a lowered 1985 to 2004 Mustang, a set of offset polyurethane bushings will raise your steering rack to correct your front suspension geometry and reduce bumpsteer.

Improves Handling. By reducing steering rack deflection, polyurethane bushings deliver quicker, crisper steering response and better control over your Mustang for better overall handling.

Polyurethane Construction. Unlike your worn-out factory rubber bushings which create a "sloppy" feel, polyurethane bushings will tighten up your steering column so your handling feels sharper and more exact.

Application. This set of 4 bushings is designed for all lowered 1985-2004 Mustangs.

Note: Coupon codes cannot be applied to this product.

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (4) Steering Rack Bushings
Installation Info
Tech Specs
Will it fit my Mustang?
  • Bullitt - 01
  • Cobra - 93, 94, 95, 96, 97, 98, 99, 01, 03, 04
  • Cobra R - 93, 95, 00
  • GT - 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04
  • LX - 87, 88, 89, 90, 91, 92, 93
  • Mach 1 - 03, 04
  • Other - 85, 86
  • V6 - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04

    Customer Photos

      Questions & Answers (4)

      4 Top Rated Questions

      Is there a need for the Steeda bumpsteer kit if you have these bushings? The description of the bushing sounds like it reduces but does not eliminate bumpsteer. Will the adjustable Steeda kit (http://www.americanmuscle.com/stbukit94b.html) improve this or eliminate it altogether? Are both a good idea? Thanks.

      • No, and Steeda states not to use this with a bump steer kit. One or the other. :)

      Helpful (3) Show 1 more answer

      Does the Steeda offset rack bushings fit a Maximum motorsports k member ?

      • The Steeda Offset Steering Rack Bushings can be used with a Maximum motorsports k member.

      Helpful (0)

      I am getting a little bit of popping from the front of my car when turning left or right sharply while driving slow. I suspect that it is the str. rack bushings. I have Ford B Springs installed (lowered my car about an inch front and back). Should I purchase the offset steering rack bushings or the standard??

      • These would be the ideal setup for a lowered vehicle to improve handling and reduce Bumpsteer.

      Helpful (0)

      Will these fit on a QA1 k member

      • The Steeda Offset Steering Rack Bushings can be used with a QA1 K Member.

      Helpful (0)
      Post Your Question

        Customer Reviews (22) Write a Review

        Overall Rating 4.8

        out of 5 stars

        Installation Time:Afternoon

        Installation Cost:0-$100

        • Handling Improvement 4.476191 4.5
        • Fit 4.857143 4.9
        • Bang For Your Buck 4.761905 4.8



        • 5/5

          Installation Time: Less than 1 Hour

          April 27, 2019

          Perfect!!!

          After lowering car 1.5 inches this was exactly what I needed to correct some bump steer. Also took out some play I had in rack. Also...super fast shipping from AM!!!

          98LazerSnake

          Year: 1998 Submodel: Cobra

          Helpful (0)

        • 5/5

          Installation Time: Shop Install

          October 04, 2018

          OFFSET RACK BUSHINGS

          REALLY IMPROVED BUMP STEER IN MY 98 GT EASY INSTALL

          KeithB

          Year: 1998 Submodel: GT

          Helpful (1)

        • 5/5

          Installation Time: Afternoon

          May 08, 2018

          Steeda rack bushing lowering

          Product is made well and does a great job as replacements for anyone who lowers the front end of their vehicle. Bushings allow adjustment of the height of the rack on the kmember. Steeda offset rack bushings keep rack in line with tie rods and keeps the inner tie rods from premature wear. Takes an hour to replace with basic hand tools and drive on ramps.

          MichaelD

          Year: 2003 Submodel: Mach 1

          Helpful (3)

        • 5/5

          Installation Time: Afternoon

          April 25, 2018

          Steeda provides just what I need.

          I did not install the bushings myself but the shop said they were very straightforward and look to put all my suspension back where it needs to be.

          ChrisS

          Year: 2004 Submodel: GT

          Helpful (4)

        • 5/5

          Installation Time: Less than 1 Hour

          March 28, 2018

          Awsome

          Great product recommend for any body. Took off those old rubber bushings and put these bad babies. I have excellent turning and no noise. Crisp turns and feels great. 2004 mach 1.

          Kel

          Year: 2004 Submodel: Mach 1

          Helpful (4)

        • 5/5

          Installation Time: Shop Install

          January 02, 2018

          Just Get Them

          If your stang is lowered, get these. They made my steering more responsive and quieter. Glad I got these.

          JustinJ

          Year: 2002 Submodel: V6

          Helpful (4)

        • 5/5

          Installation Time: Afternoon

          December 27, 2017

          Great product

          Great product. Helps correct steering geometry when car is lowered

          RichardJ

          Year: 2003 Submodel: Cobra

          Helpful (4)

        • 5/5

          Installation Time: Less than 1 Hour

          June 19, 2017

          Steering rack bushing

          Great product, easy install.Made a very good difference in steering response.

          AlexandreB

          Year: 1994 Submodel: GT

          Helpful (4)

        • 5/5

          Installation Time: Less than 1 Hour

          May 14, 2017

          No longer wandering steering

          My stang is lowered so I picked these up instead of the non offset ones. I doubt these will slip as a rubber mallet was needed to install the sleeve back into the middle. Slot of very hard hits to get it all the way in. No more windy day feel in the steering. Move the wheel at all and the car starts to turn! No slop!. I hope the feeling lasts.

          Drock13

          Year: 2004 Submodel: Mach 1

          Helpful (6)

        • 5/5

          Installation Time: Less than 1 Hour

          April 25, 2017

          2003 COBRA

          GREAT PRODUCT!! WOULD RECOMMEND FOR ANY LOWERED MUSTANGS!!

          2003cobra

          Year: 2003 Submodel: Cobra

          Helpful (4)

        • 5/5

          Installation Time: Afternoon

          May 23, 2014

          A MUST on my 98

          my 98 has been lowered for years and all the bushings were beat. i have installed these and loved the feeling i never imagined i would get back! perfect for lowered cars my car is 2 1/2 in the front and 2 in the rear.

          streetmuscle

          Year: 1998 Submodel: GT PA

          Helpful (5)

        • 5/5

          Installation Time: Less than 1 Hour

          July 05, 2013

          Offset bushings may eliminate bump steer

          I have no way to tell if I was going to get bump steer but it was cheap insurance as I had the car on the hoist. The handling is excellent with the staggered tires and lowering.

          Johns2004GT

          Year: 2004 Submodel: GT Ottawa, Ontario, Canada

          Helpful (6)

        • 5/5

          Installation Time: Afternoon

          June 27, 2013

          why did i waite!

          should have gotten these a long time ago. they do exactly what they are supposed to. they corrected the alignment for the steering wrack and made the steering more responsive.

          MikeAM

          Year: 1996 Submodel: Cobra PA

          Helpful (5)

        • 3/5

          Installation Time: Less than 1 Hour

          April 01, 2013

          Very stiff material.

          These are a lot stiffer than the stock bushings. Therefore there should be minimal movement on the rack increasing handling. Only downside is that they are a little difficult to install, just because they have no give. Just be patient and they will go on.

          Positraction

          Year: 2001 Submodel: GT Crystal Lake, IL, USA

          Helpful (5)

        • 5/5

          Installation Time: Less than 1 Hour

          December 22, 2012

          must have for lowered vehicles

          i had to lower my rack for header clearance and these fixed my alignment and bumpsteer issues

          computerpilot

          Year: 1988 Submodel: GT Midlothian, VA, USA

          Helpful (7)

        • 5/5

          Installation Time: Afternoon

          August 25, 2012

          best buck

          My car was lowered , so I need either use offset bushing or bump stop, well, but for price range , this one lead the way

          jacob1993

          Year: 2002 Submodel: GT

          Helpful (5)

        • 4/5

          Installation Time: Less than 1 Hour

          August 12, 2012

          not too shabby

          My car is lowered on h&r supersports. I began to hate driving my mustang because of the odd way the wheel would jump around in my hands. But these Tightened my front end up rather nicely, I'm not fighting my steering wheel too much anymore. Car still follows the ruts in the road, but hey. Better than it was before these! Great product, fast shipping, nice price. Thanks AM!!!

          genericnickname93

          Year: 1997 Submodel: GT Johnston, RI, USA

          Helpful (8)

        • 4/5

          Installation Time: Less than 1 Hour

          August 05, 2012

          Great buy when lowering your stang

          Bushings seemed to be made of quality materials. They raise your steering rack about a half inch. I installed these along with H&R SS springs and i have not noticed and bumpsteer problems. I noticed slightly better steering response in corners. My assessments were made at Mid-Ohio Sports Car Course

          DSGmach395

          Year: 2003 Submodel: Mach 1 Plymouth, MI, USA

          Helpful (4)

        • 5/5

          Installation Time: Shop Install

          Installation Cost: 0-$100

          April 29, 2012

          improved steering and alignment

          Awesome product got the part super quick. I looked at a lot of reviews about lowering my stang. This is a must have to get proper alignment. Works great I had them installed when I got my alignment. Told the shop to use loctite (red) to keep the bushings from moving under tight cornering. I've had them in for 3 months no problems whatsoever. Definitely feel a difference in handling. The old ones where all worn out. Little things like this keep the big things working how there suppose to. Thanks AM.

          streetr356

          Year: 2000 Submodel: GT Orlando, FL, USA

          Helpful (5)

        • 5/5

          Installation Time: Full Day

          March 25, 2012

          best upgrades ever

          Eibach sprnigs are a must, maxium motorspotrs caster camber plates are the best I've used yet, steeda bump steer and rack bushing kit OMG, let me say its a different car...... for sure worth the money.......

          32vshkr

          Year: 2003 Submodel: Mach 1 anthem az

          Helpful (4)

        Related Mustang Categories