(approx) 1 Hour
Simple installation for anyone.
This is the TruFiber Carbon Fiber Chin Spoiler for the 2015 Enduro GT and EcoBoost Performance Pack Mustang. It's gonna be for those of you out there with factory Performance Pack Mustangs that are looking for a direct replacement carbon fiber chin spoiler. When it comes to exterior mods like this, you have a choice of going with a chin spoiler or a chin splitter, and they're going to give you different looks. This is TruFiber's Chin Spoiler and it's gonna completely take the place of your factory chin spoiler. I'll go over the install in more detail later on, but you can plan on spending an hour. And this is a simple install with no drilling required, so it'll be a one out of three wrenches in the difficulty meter. So I always say that carbon fiber is for the people out there that wanna go all out on their styling. Carbon fiber gives a totally different type of look than the usual spoiler or splitter does, and carbon fiber can get expensive fast, so it's not for the faint of heart. It makes for a nice, clean, classy style, in my opinion. And a little bit of carbon fiber looks great on the S550. Part of the reason why I personally like carbon fiber so much is because of the appearance. It's not an ABS or poly material that has a tendency to show marks and a lot of imperfections, or even fade from the sun. It doesn't have that TPO textured look to it either, and you don't have to worry about getting it back to black so it's made to look good, it just naturally looks good and has its own style. You don't have to worry about prepping or painting to get a clean style look from it, it authentically has that on its own. This is real carbon fiber and it's a 3K 2x2 twill weave design. So there are different types of carbon fiber and they have different looks. This type is gonna give you that weave design that you can see right here and a very glossy finish that almost looks black from far away. This isn't a dry carbon fiber design, and the spoiler also has a clear coat finish with some UV protection. I will say though, that even though this does have a clear coat with UV protection, if you wanna keep your carbon looking new and glossy, you should keep a coat of wax on it. This type of carbon does tend to fade and it gets sun bleached if you don't take care of it. This is also a chin spoiler, not a splitter, so it's going to look different than a chin splitter would. The style has the same basic lines and styling of the stock chin spoiler, but TruFiber just enhances and extends it a little bit more. So it's a little bit bigger than a stock chin spoiler is. This spoiler is a direct fit replacement and has pre-drilled holes that will be used with stock hardware. So obviously this is gonna make for a very easy install, which is a bonus. This is only gonna fit the GTs and the Ecoboost that came equipped with the factory Performance Package. TruFiber does have a carbon fiber chin splitter, but it can't be combined with a spoiler, since they are designed to work independently, just in case you were thinking about it. As far as price, I mentioned this earlier, but carbon fiber tends to be expensive, especially good carbon fiber. This is a good, clean, stand-out option and it's gonna cost you right about the $700 mark. The carbon fiber chin splitter that I mentioned earlier does cost a little bit less since it's made from less material, but if these options are a bit too expensive for you, then there are others on the site. Installing this is very easy, a one out of three wrenches in the difficulty meter, it should take about an hour from start to finish. You have the option of completely removing your bumper for this install, but you don't necessarily have to. It's up to you and what you're comfortable with. And removing the bumper will add some time to the install. A lifter or jack and jack stands will make things easier here, since you will need to get it on the car for portions of the install. And, of course, we have access to a lift here, so we're going to install this the simple way. You're gonna need to back out and remove your factory hardware, so you can use it to attach the spoiler. This does just attach with the stock hardware, so if you want to, you can always add some double-sided 3M tape to this, for a little extra reassurance, but it's not required, and you certainly don't have to. After that, it's just a matter of re-installing the bumper if you removed it, that is. That's gonna do it for this review of the TruFiber Carbon Fiber Chin Spoiler for the 2015 Enduro Performance Package GT and EcoBoost Mustang. As always, you can check it out more online right here at americamuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
10 More Questions
Performance Package Only