Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-877-887-1105
Every day 8:30AM EST - 11:00PM EST
Win Any Wheel & Tire Package! Enter Daily

VMP GEN II 2.3L TVS Supercharger Head Unit Upgrade (07-10 GT500)

AmericanMuscle no longer carries the VMP GEN II 2.3L TVS Supercharger Head Unit Upgrade (07-10 GT500). Please check out 2010-2014 Mustang Supercharger Kits & Accessories for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • VMP GEN II 2.3L TVS Supercharger Head Unit
  • 200+ RWHP Increase Over Stock
  • 50+ RWHP Increase Over VMP GEN I
  • Boost Range 15 - 23 psi
  • Black Wrinkle Finish
  • Bolt-On Replacement
  • Clears Stock Factory Hood
  • Choice of Pulley - 2.40", 2.50", 2.65" or 2.75"
  • Fits 2007 to 2010 Shelby GT500
Unleash the Mighty Serpent. Are you a Shelby owner that is looking to add more tire shredding power to the rear wheels of your GT500? Then you may be interested in VMP's GEN II 2.3L TVS Supercharger Head Unit. Just by swapping out your factory blower with a GEN II Head Unit you will see an increase of over 200+ horse power at the rear wheels. Those GT500 owners upgrading from VMP's first generation TVS will see an increase of 51 horse power at the rear wheels.

New High-flow Technology. VMP's GENII Supercharger was re-designed to fix the short comings of their first generation head unit. VMP capitalizes on Eaton's 2nd GEN Twin Vortices Series (TVS) positive displacement supercharger technology. Eaton's TVS design features a pair of four-lobe rotors that are twisted at 160-degrees to increase thermal efficiency, which allows for larger volume capacity and higher operational speeds. VMP Tuning improves on Eaton's design by integrated the intake plenum elbow into the all new one-piece shell design and by increasing the blowers interior volume for an 18% improvement in airflow when compared to the first generation VMP TVS Blower.

15 to 23 PSI. This VMP GEN II TVS Supercharger will produce up to 15 psi of boost with a 2.75" upper pulley and stock lower crank pulley installed. However it can even handle up to an amazing 23 psi of boost pressure with a 2.4" upper pulley and a 15% overdrive lower crank pulley installed.

Required Upgrade. Installation of this VMP Supercharger Head Unit will require an SCT SF3/X3 or SF4/X4 Hand Held Tuner and a VMP Tuning Supercharger Tune File for operation (sold separately). If you already own a SCT Tuner you can purchase the required tune files (Click Here). If you don't already own a SCT Tuner, you can easily purchase one using the option above that already includes 3 VMP Supercharger Tunes.

Your Choice of Pulley. The VMP GEN II 2.3L TVS Supercharger Head Unit is available with your choice of pulley size. Choose from 2.40", 2.50", 2.65" or 2.75". Please select your application from options listed above.

Application. This VMP GEN II 2.3L TVS Supercharger Head Unit Upgrade is designed as a direct fit performance upgrade for the 2007 to 2010 Shelby GT500 Mustangs equipped with the Supercharged 5.4L DOHC V-8 engine.

2007-2010 Shelby GT500 Boost Numbers (5.4L)
 Pulley Size  w/ factory lower crank pulley  w/ 10% overdrive lower crank pulley  w/ 15% overdrive lower crank pulley
 2.40"  18-19 PSI  22 PSI  23 PSI
 2.50"  17 PSI  21 PSI  22 PSI
 2.65"  16 PSI  19 PSI  20 PSI
 2.75"  15 PSI  17 PSI  18 PSI

Note: Coupon codes cannot be applied to this product.

This product will not ship to addresses in California due to state regulations. Additionally, support will not be provided for tuning for California residents.

Fitment: 2007 2008 2009 2010 Details

CA Residents: Warning: California's Proposition 65

What's in the Box
  • (1) VMP GENII TVS 2300 Supercharger Head Unit
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (1) Submit Your Photo

View 1 Photo

Questions & Answers (7)

5 Top Rated Questions

What else is needed for the install on my GT500? Are any mods needed in the engine bay area? Thanks

  • This VMP GEN II 2.3L TVS Supercharger Head Unit Upgrade is designed as a direct fit performance upgrade for the 2007 to 2010 Shelby GT500 Mustangs equipped with the Supercharged 5.4L DOHC V-8 engine.

Helpful (2)

Will the stock belt work with this super charger head

  • The VMP GEN II 2.3L TVS Supercharger Head Unit Upgrade can use the stock belt, when used in conjunction with a 90mm idler pulley.

Helpful (0)

Do you need a heat exhanger or will the stock system be sufficient for cooling

  • Since this head unit is considered a direct bolt on, you will not need to upgrade the cooling system.

Helpful (0)

So, does this unit come with pulley choice?

  • Yes, you will have the choice of either a 2.40, 2.50, 2.65, or 2.75 pulley from the options above.

Helpful (0)

Does this kit come with a heat exchanger?

  • The VMP GEN II 2.3L TVS Supercharger Head Unit Upgrade will not include a heat exchanger.

Helpful (0)
Post Your Question
2 More Questions
does the VMP gen II 2.3 TVS supercharger come with new throttle body 1 answer
What all is included in this kit? Is it just a swap of the factory blower to this one? Any injectors or anything else included 1 answer

Customer Reviews (2) Write a Review

Overall Rating 4.5

out of 5 stars

Installation Time:Afternoon

  • Performance Gain 5 5
  • Fit 5 5



  • 5/5

    Installation Time: Afternoon

    November 13, 2017

    Best bang for your buck

    If replacing just the head unit not the injectors the driver side fuel rail DOES not need to be removed. It needs to be bolted on before the unit goes on the car as the elbow is in one piece. Recommended to use bigger injectors and fuel pump booster.

    serenity1007

    Year: 2010 Submodel: GT500

    Helpful (8)

  • 4/5

    July 10, 2016

    vmp gen 2

    The fit and finsh was awesome! To install it took me and friend a sat. Just going to take it for a run across county . I will let AM know it did.

    jersey

    Year: 2004 Submodel: Cobra R

    Helpful (4)

Related Mustang Categories