Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

VMP Ultimate Pulley Tool Installation & Removal Kit (07-14 GT500)

AmericanMuscle no longer carries the VMP Ultimate Pulley Tool Installation & Removal Kit (07-14 GT500). Please check out 2015-2019 Mustang Superchargers for an updated selection.

Features & Details

  • Supercharger Pulley Removal and Installation Tool
  • Heavy Duty Construction
  • Unique Clamshell Design
  • Provides Damage Free Removal
  • Accommodates 2.4" to 3" Size Pulleys
  • Complete Kit
  • For Use on 2007-2014 Shelby GT500's
Hassle Free Installation. Swapping out your GT500's upper supercharger pulley in the quest for more power is a great idea. What is not so great is actually removing the old pulley and installing the new one. Most tools on the market are awkward to use and can surprisingly damage the pulley in the process. However, VMP's Ultimate Pulley Tool will make removal and installation hassle free. VMP utilizes a clamshell design that clamps onto the pulley and holds it by the ribs, not the face. This unique clamshell design applies uniform force around the circumference of the pulley for easy damage free removal and installation.

Quality Construction. VMP's Ultimate Pulley Tool is precision CNC-machined from solid billet aluminum for superior strength and long lasting durability. Unlike other inexpensive pulley tools that are difficult to use, VMP includes fine threaded bolts, a D-3 bearing and grease to make removing and installing your GT500's pulley a painless experience.

Application. VMP's Ultimate Pulley Tool Installation & Removal Kit is designed to remove press-fit pulleys from 2007-2014 Shelby GT500s with the TVS or M122 supercharger as well as Roush Mustangs with a M90 or P51 TVS blower.  It can also be used to remove the stock pulley found on Lightning and Roush F150 trucks. Accommodates pulleys 2.4" to 3" in size.

Note: Coupon codes cannot be applied to this product.


This product will not ship to addresses in California due to state regulations. Additionally, support will not be provided for tuning for California residents.

Fitment: Details

MPN# VMPGT500TOOL

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (2) HD Clamshell Set
  • (2) 1/2-13 bolts x 3
  • (2) 3/8-16 bolts x 4
  • (2) 3/8 washers
  • (1) Square bar
  • (1) 3/4-16 bolt with nub
  • (1) 5/8-18 bolt with tapped hole
  • (1) M8 x 40 full thread screw
  • (1) Large 5/8 D-3 bearing
  • (1) Small washers
  • (1) 5/8-18 nut
  • (1) Grease Packet
Tech Specs
Will it fit my Mustang?

    Customer Photos (6) Submit Your Photo

    View All 6 Photos

      Q & A

      No questions about this product yet.

      Ask the First Question

        Customer Reviews (23) Write a Review

        Overall Rating 4.7

        out of 5 stars




        • 5/5

          May 31, 2019

          Easy Peasy

          Tool makes the job effortless. American Muscle shipped the tool fast as well.

          WnaFstPny

          Year: 2014 Submodel: GT

          Helpful (0)

        • 1/5

          May 16, 2019

          Missing parts

          The package was missing parts when I received it. I was not pleased! At first American muscle wanted to charge me for returning the item also.

          Squirrel

          Year: 2008 Submodel: GT500

          Helpful (0)

        • 5/5

          April 20, 2019

          Good tool to have

          The tool is a must have if you are going to be swapping pulleys on your GT500’s blower. Little nerve racking but it does the job. My only gripe Is that the support washers need to be a little more heavy duty. They bent up after the first use. Not a big deal went to the hardware store and problems solved.

          Erikbaseball1

          Year: 2014 Submodel: GT500

          Helpful (0)

        • 4/5

          April 11, 2019

          Works good but not great.

          The product does what it's supposed to but the bolts that go into the 'C' brackets are too long, so you will bottom out the main bolt unless you use spacers. Other than that, it works great. Also, the one that I received was used, not new, but AM credited my account for that, so thanks AM!

          MeanGreen

          Year: 2013 Submodel: GT

          Helpful (0)

        • 5/5

          March 05, 2019

          Almost Ready

          I am anxious for spring to have all the the goodies for my 500 installed.

          AndrewH

          Year: 2009 Submodel: GT500

          Helpful (0)

        • 5/5

          February 23, 2019

          Well made tool

          Product work very well. Was easy to use. It's a great tool to have in your tool box for years to come.

          RichardW

          Year: 2014 Submodel: GT500

          Helpful (0)

        • 5/5

          January 28, 2019

          Couldn't be easier!

          Made pulley swap super fast and simple. No damage to pulley that was removed or installed. Great customer service to boot!.

          MichaelE

          Year: 2008 Submodel: GT500

          Helpful (0)

        • 5/5

          October 24, 2018

          Easy

          Works great. But to really fly through the changing of the pulley...get you an impactgun. Thanks AM.

          soloe

          Year: 2014 Submodel: GT500

          Helpful (6)

        • 4/5

          July 16, 2018

          A must have!!

          Bought this pulley tool to in stall the metco 2.6 pulley on my 2010 shelby. It made the install go very smooth. Safely and easily removed stock pulley with no damage, and installed new pulley with no issues. A must have if your doing a pulley mod.

          Joseph

          Year: 2010 Submodel: GT500

          Helpful (7)

        • 5/5

          May 26, 2018

          Vmp ultimate pulley tool works great.

          I was worried about this pulley tool damaging things and only used hand tools instead of my impact due to this. The job was still easy and next time I need a pulley change I will have no fear and will use my impact. High quality tool and very well designed. I would recommend this to anyone. My only complaint at all would be that the fine threads in the block needed cleaned up before use as they did not appear to be deep enough to get the bolt to thread in even when lubed liberally. A few minuetes with a tap and lube and problem solved.

          DrLong1

          Year: 2014 Submodel: GT500

          Helpful (7)

        • 5/5

          May 08, 2018

          Great Pully Tool

          Worked perfectly on my 2008 GT500. Removed OEM 3" installed a 2.6" super charger pulley and installed an auxiliary idler pulley. Drained coolant to remove upper hoses for a little more room. Put new coolant in. I have 29,450 miles. Took 2hrs. I recommend this product.

          DouglasS

          Year: 2008 Submodel: GT500

          Helpful (7)

        • 5/5

          March 21, 2018

          Good

          Worked great was a little confusing at first but YouTube got me going thanks

          Dino

          Year: 2010 Submodel: GT500

          Helpful (7)

        • 5/5

          March 09, 2018

          Top notch tool

          I used the VMP pulley tool to pull off the stock 3.0 pulley and install the a 2.6 pulley. It was quick and easy! Very good tool!

          JimmyC

          Year: 2007 Submodel: GT500

          Helpful (7)

        • 5/5

          March 05, 2018

          Works as it should.

          The one in the pictures looks nicer lol, but it worked flawlessly. Stock pulley removal and aftermarket pulley install was smooth as butter when following provided instructions.

          Erich

          Year: 2008 Submodel: GT500

          Helpful (7)

        • 5/5

          December 12, 2017

          Great Tool

          Buy the best! No damage to the factory pulley and the instillation of the 2.6 Metco pullet was a breeze.

          ShawnA

          Year: 2011 Submodel: GT500

          Helpful (8)

        • 5/5

          November 08, 2017

          Could just not be without it

          This product is a "must have" when you need to remove or change the pulley on yor Gt 500.

          BjoernR

          Year: 2010 Submodel: GT500

          Helpful (8)

        • 5/5

          October 16, 2017

          Must Have!

          Do not even waste your time not buying this tool if you are doing a pulley swap. I tried to go the cheap way and not get it. After failed attempts and cheap pullers I purchased this tool and got it off within 15 minutes. Hands down a must have!

          MattE

          Year: 2007 Submodel: GT500

          Helpful (9)

        • 5/5

          June 04, 2017

          Pulley swap tool

          Worked very well. No damage done to stock pulley. 2.6 metco went on relatively easy. Having 2 people for install helps, especially when putting belt back on.

          ChristopherH

          Year: 2012 Submodel: GT500

          Helpful (8)

        • 5/5

          April 09, 2017

          Vmp puller

          Great quality tool.easy to use to pull and install.great buy..thanks

          Alberto

          Year: 2009 Submodel: GT500

          Helpful (9)

        • 5/5

          April 06, 2017

          Worth every penny

          This tool is the only way to take off and install your pulley, don't waste your time trying to figure out a way to save a few bucks it's not worth it trust me.

          RichK

          Year: 2007 Submodel: GT500

          Helpful (6)

        Related Mustang Categories