Weathertech Front & Rear Side Window Deflectors - Dark Smoke (15-16 SuperCab, SuperCrew)

(2 or 4) Side Window Deflectors and (1) Seating Tool included. If there is a WeatherTech® label, it should be positioned towards the rear of the vehicle. They include (2 or 4) deflectors for side windows and (1) adjustment tool. If there is a WeatherTech® label, it should be oriented towards the rear of the vehicle.

Make sure windows are clean and dry. Then, lower windows halfway . Make sure the windows are clean and dry. Then, lower the windows halfway.

Slide forward, into window channel. Ensure edge rests on top of the outer window sill! Slide forward, through the window gutter. Make sure the edge is resting on the top of the sill of the outer door.

Bow the deflector outward. Fold the deflector out.

Insert rear edge leaving a gap at the top. Insert the back edge leaving a space at the top.

Pull down and tuck in working from front to back. Pull down and get to work from the front to the back.

Carefully pull outward on the baffle. Pull the deflector carefully outwards.

Be sure to remove adhesive backing before installation (if supplied). Slide upward into place, then gently pull outward to set the baffle. Be sure to remove the adhesive backing before installation (if any). Slide up and place it in its place. Then, gently pull outward to secure the deflector.

Carefully run seating tool between deflector and window seal to seal the deflector. Roll all windows up in small increments. Make sure to do this CAREFULLY and SLOWLY !! Carefully pass the adjustment tool between the baffle and the window seal to seal the baffle.

Roll all windows up in small increments. Make sure to do this CAREFULLY and SLOWLY !! Repeat steps 1-9 on the passenger side. Raise all the windows slowly. Be sure to do it SLOWLY and CAREFULLY!