Win $17,760 For Your Truck! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Weathertech Rear Bump Step - Black (97-18 All)

Market Price $69.99 You Save 16% ($11.04)
Starting At

$58.95 (each)

FREE Shipping
  • Item T526650
  • MPN# 81BS1

Will this fit your F-150?

Features, Video & Details

  • Rear Bump Step
  • Protects Rear Bumper from Collisions and Reverse-Gear Errors
  • Theft Deterrent Pin Works with BumpStep, Bike Carrier, Etc.
  • Can Also Be Used as a Rear Step with 300-Lb Weight Capacity
  • Injection Molded Resin
  • Black Color
  • Quick and Easy Installation
  • Made in the USA
  • 3 Year Limited Warranty
  • Fits All 1997-2018 F-150s

Review & Installation Video

Review & Install Video

Weathertech's Rear Bump Step provides you with a safe, simple way to get in and out of your '97 or newer F150's truck bed without climbing up or over your bumper and slipping or falling. This removal step also provides some bumper protection in parking lots and against anyone who might tap your rear end in traffic. The install on this is extremely simple. All you're doing is connecting this to your tow hitch. So, I'm giving this a very soft one out of three wrenches on our difficulty meter. Expected to take you about 15 minutes. This bump step is nice, because it's relatively lightweight. It's made out of a durable injection molded resin instead of steel. So you don't have to worry about lugging this thing around or letting it rust if you keep it installed outside. Even though it's made out of plastic, it can hold up to 300 pounds. I think this is a good load rating, because it'll support you and whatever you're trying to hoist into your truck bed like wood beams or anything else you might be hauling around. The top of this step has a molded tread pattern. So there is less risk of you slipping off like you might if you were standing on your bumper. And looking underneath the step you'll see there is some angular fins behind the rear portion of the step. This will allow flex and will absorb impacts if you're ever unfortunate enough to have a run-in with another car, or if you back into anything in a parking lot while reversing. This step is easily removable since it installs directly into your 2-inch trailer receiver. However, if you decide to leave the bump step installed, you won't have to worry about someone trying to steal it since they come with a theft deterrent pin similar to the one that comes with a bike carrier. It just adds some piece of mind. Weathertech's Bump Step is the most affordable truck bed step in this category at just under $60. There are other options if you want a step that is a bit longer, or if it is made out of steel, but those who are gonna start at about $100. Almost double the price for the same functionality. I mentioned before this is gonna be a simple installation. I'm giving this a one out three wrenches on our difficulty meter, and expected to take you about 15 minutes or less. We're not gonna be needing any tools once you get the step out of the box. First, take your bump step and slide the 2-inch square portion into the 2-inch receiver with the grooved tread pattern facing up. Align the step to the deepest hole position allowed by the receiver. Then, insert the hitch pin into the hole and secure the step. After it's secured, you're good to go. That wraps up my review and install of Weathertechs's Rear Bump Step. Check this out and more at americantrucks.com.

Benefits. The Rear Bump Step by WeatherTech is a dual-purpose addition to your standard 2-inch rear hitch receiver. This sturdy bump step keeps your rear bumper safe from people running into it and from impacts caused when reversing. It also doubles as a handy, rugged step that supports up to 300 lbs, to give you easier access to your truck bed.

Quality Construction. The Rear Bump Step is manufactured out of extremely tough injected-molded resin by WeatherTech, and features a molded tread on the upper surface for traction. Installation is quick and easy, with no drilling involved. This product is made in the USA and comes with a 3 year limited warranty.

Application. This Weathertech Rear Bump Step is designed to fit all 1997 to 2018 F-150s equipped with a standard 2-inch hitch receiver.

Note: Coupon codes cannot be applied to this product.

Fitment: 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details

What's in the Box
  • (1) BumpStep
Installation Info
Will it fit my F-150?

People Who Bought This Item Also Bought

Customer Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (1) Write a Review

Overall Rating 5.0

out of 5 stars




  • 5/5

    July 12, 2016

    Badass!!

    It's hidden but worth the price because it's like a step rail for the bumper. Little and quick to put in.

    Tiller3688

    Year: 2014 Submodel: 5.0L V8 FX4

    Helpful (1)

Related F-150 Categories