10 More Questions

Can I still use my tower brace? I have a 2008 Bullitt, will this supercharger fit under the stock tower brace? Can I use the cold air intake that came with the Bullitt or do I need to change it with the one in the kit? 2 answers

• yes you can, STEEDA has them on their page. http://www.steeda.com/steeda-mustang-whipple-billet-strut-tower-brace-555-5725/

• I have the 624 HP Ford Racing Supercharger Kit on my 2013 Ford Mustang GT. You will not be able to use your strut bar, nor do I don't think you will be able to find a replacement that will fit over the supercharger and still clear the hood. The kit will come with a new throttle body and air box. The tubes and throttle are oval in shape, making it difficult to install another intake filter... and this is why I decided to stick with the intake that came with the kit. Hope this helps and good luck!

Helpful (1) Thanks for your input! Show 1 more answer

This supercharged kit fit on my Saleen 05 ? 4.6 L / manual transmission 1 answer

• This kit will fit your vehicle.

Helpful (0) Thanks for your input!

Can you sell or put together the stand alone intercooler kit for this SC? I have this SC but without the intercooler. If not, is whipple the next place to go for the upgrade kit? 1 answer

• Unfortunately, we do not carry the intercooler from this kit separately. We would recommend reaching out to Whipple as they would have the kit separately for you.

Helpful (0) Thanks for your input!

My '05 GT has this 550 hp Whipple kit. The docs say it came with a dual fuel pump. I'm looking for a replacement, just in case. The closest I can find is M-9407-GT05, but that's an entire kit. I just want the pump. Do you sell it separately or know the FRPP PN? Thanks. 1 answer

• We currently do not offer the fuel pump from the Whipple W140AX 2.3L Intercooled Supercharger Kit separately. The closest would be the Ford Performance High Performance Dual Fuel Pump Kit, item # 50140, (https://www.americanmuscle.com/ford-fuel-pump-0509gt.html).

Helpful (0) Thanks for your input!

What size SC pulley does this come with? 1 answer

• The Whipple W140AX 2.3L Intercooled Supercharger Kit comes with a 3.8" SC pulley.

Helpful (0) Thanks for your input!

Can it handle more than 11 pounds of boost? 1 answer

• The Whipple W140AX 2.3L Intercooled Supercharger Kit is capable of supporting higher boost levels, however you would need to consult with Whipple to determine the maximum safe boost acheivable with your setup and this blower.

Helpful (0) Thanks for your input!

Have a 2010 GT Manual. Upgrated from stock i have a C L Cold Air Filter, Ford Racing throttle body, and ford racing Intake manifold. On the exhaust i have kooks long tube headers and kooks offload x pipe with magna flow racing mufflers will this supercharger work with the above? I'm sure the intake section might have to be removed. everything else is stock, will i have to get other parts to support the horsepower gains? 1 answer

• The Whipple Intercooled Supercharger Kit will be able to reuse all of your parts with the exception of the cold air intake.

Helpful (0) Thanks for your input!

Can i use with stock cam ? 1 answer

• The Whipple Intercooled Supercharger Kit can be used with stock cams, however a set of cams designed for use with superchargers (blower cams) will provide significant performance increases over your stock cams.

Helpful (0) Thanks for your input!

I plan on upgrading my driveshaft and flywheel/clutch but can the stock trans and rear differential handle the power? TR 3650 manual transmission 1 answer

• Your stock transmission and diff will be able to hold up to the Whipple Intercooled Supercharger Kit.

Helpful (0) Thanks for your input!

Do you need to upgrade the lower end of the motor to use this Whipple supercharger 1 answer

• You will not need to upgrade anything on the lower end as this supercharger is a complete kit.

Helpful (0) Thanks for your input!