4.6L Intake Plenum Cover (05-10 GT)

4.6L Intake Plenum Cover (05-10 GT)
Click to Enlarge

TRANSCRIPT

Hey I’m Justin with AmericanMuscle.com, and I’m checking out a modern Coyote inspired engine dressup item for your 4.6L V8, that would be this intake plenum cover fitting all 2005-2010 Mustangs GTs. Ok so the general design or at least appearance of the stock 4.6L intake manifold, is pretty similar to that of the newer 5.0 intake manifolds, so that makes this cover work so well on those 3 valve motors, and if you’d like to get more ideas on how to dress up your 3 valve motor, in addition to seeing some gen specific builds, you have to subscribe to our YouTube channel, simply click the link below or on the AM logo at any point during this video. Again since this cover does mimic that of the newer 5.0 motors it is going to expose your runners on your intake manifold, while covering up the fuel rails and some other unsightly stuff on the top of your motor. As for the construction, this has been made from a durable and heat resistant composite material, while being finished off in a very sleek silver or gunmetal color. Finally, the 4.6L motor has been embossed on the top of the cover, just for a nice little finishing touch. Another nice thing about this intake manifold cover is that it works seamlessly with the throttle body plenum extension cover, in addition to the fuel rail covers. Now, a lot of customers on our site have done that and have submitted some images to show how well it works. If you want to see more pictures of this manifold cover in addition to those pictures I just talked about, you can simply click the link below to head back to the product page over at AmericanMuscle.com. Getting the manifold cover installed is extremely straightforward and should only take you about 15 minutes from start to finish. You may have to reroute a ground strap or part of your wiring harness but honestly, not a big deal whatsoever and shouldn’t give you any problems. IF you should run into an issue, you can always get in touch with one of our customer service reps, give them a call at 855-422-7439, or shoot them an email at support@AmericanMuscle.com. So if you’re a big fan of the Coyote Mustang’s engine cover and wish your 3 valve could share a little bit of that same styling, well now it can thanks to this intake manifold plenum cover, of course available right here at AmericanMuscle.com
... READ MORE
OUR PRICE$199.99(each)
Market Price $259.99You Save 23% ($60.00)
Item # 13408
(4.6/5)7 Reviews
Ships the same business day
Email

Product Features

  • Coyote inspired "Open Runner" design
  • Embossed "4.6" logo
  • Gunmetal gray finish
  • Heat resistant composite
  • Fits all 2005-2010 GT Mustangs
  • Made in the U.S.A.
Open Runner Design. Now you can give your 4.6L GT's engine bay the same styling queues of the newer Coyote Mustangs with a "Open Runner" style Intake Plenum Cover that features an embossed 4.6L logo on the front.

Heat Resistant Composite. Made in the USA this 4.6L Intake Plenum Cover is molded from a heat resistant composite material for extreme durability and to withstand high engine temperatures.

Application. This Engine Intake Plenum Cover is designed to fit all 2005 to 2010 GT Mustangs equipped with the 3 valve 4.6L engine.

Technical Note. Modification required when using in combination with a Throttle Body Spacer.

Installation Time:

(approx) 15 Minutes

Difficulty Level:

Simple installation for anyone.

What's in the box?

  • (1) Plenum Cover
  • Installation hardware

What's in the box?

  • (1) Plenum Cover
  • Installation hardware
checkmark
Fitment:
  • GT 05, 06, 07, 08, 09, 10
  • Bullitt 08, 09
checkmark
Known Exceptions:
Modification required when using in combination with a Throttle Body Spacer

Customer Reviews