Talk to a Mustang Expert
1-888-332-7930
Mon-Sun 8:30 AM - 11:00 PM EST

Free Shipping On Orders Over $49. Details

CDC Shaker System (05-06 GT)

Market Price $849.99 You Save 11% ($94.99)
Our Price

$755.00

FREE Shipping
  • Item 11037
  • MPN# 110050

Out of Stock Notify Me Choose options to add to cart

Features & Details

  • Muscular Styling
  • Classic Shaker Look
  • Functional for Better Airflow
  • No Tune Required
  • Fits 2005-2006 Mustang GT
Muscular Styling. Give your S197 the classic look of a 60's musclecar and improve engine cooling capacity with a CDC Shaker system. The retro, classic musclecar look of this Shaker system complements the lines of your 'Stang while improving airflow for more power.

Improves Airflow. This CDC Shaker System includes all the duct work necessary to make it fully functional. The Shaker System boosts overall power of the Stang by providing a direct flow of air to the engine block.

Superior Design. This system uses your factory hood which has a factory stamping in the hood inner, which accommodates the shaker system installation process, while maintaining the integrity of the hood. In addition CDC has engineered water management systems within the shaker ductwork.

No Tune Required. This shaker system has been designed to use the factory airbox so a tune isn't necessary, saving you time and money.

Complete Kit. The Shaker System includes an engine dress up cover, cast aluminum scoop, and all necessary hardware, instructions and templates.

Application. This system is designed for the 2005 to 2006 Mustang GT.

Fitment: 2005 2006 Details

What's in the Box
Hardware included:
  • Aluminum Shaker Scoop - Die Cast Aluminum
  • Engine dress up cover
  • Hardware Kit and complete instructions
Installation Info
Tech Specs
Will it fit my Mustang?
  • GT - 05, 06

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
AWSOME LOOK

BOUGHT MY 06 GT WITH THIS INSTALLED , LOOKS SO GREAT.

Helpful (1)

5/5
best mod for appearance

Fit perfect and looks amazing!!! Was a tight fit with the BBK CAI but didnt have to trim. A must buy for classic shaker lovers

Helpful (1)

Overall Rating 4.9 out of 5 stars
Read All 16 Reviews

Customer Photos (61) Submit Your Photo

View All 61 Photos

You Might Also Like

22 Questions / 6 Answers

Ask a Question

hows this due with weather? So if it is raining or snowing out, can i still drive my mustang with this kit on it? also, does any one know how much it would cost a shop to cut the hood?

Tomstang

  • The Mustang Shaker was engineered with multiple water management systems to prevent water from entering the engine, making foul-weather driving concerns obsolete. should only be a labor charge---once laid out and hood taped (no scratches) it should only take a few minutes to cut out

    jeff

Show 2 more answers Helpful (11)

I have an 05 GT with FRPP Hot Rod Cams. And my car shakes alot at idle. And I want a shaker hood scoop to show that off. However, I noticed the clearance from the hood scoop with the hood is very small. I'm worried that the scoop would rub up against the side of the hood a little too much due to the cams. Any suggestions?

Taylor

I'm looking to get this but I have a hood scoop will this cover the holes that are already there and does this come with a pattern to mark where to cut the hole??? Thanks

burkenater

Can this work with any of your cowl hoods?

Kevin

  • Hi, This shaker system is designed to be used with the factory hood.

    Chris J

Helpful (0)

Is the "dress up" cover made of aluminum or plastic? Does the kit come with MUSTANG and /or FORD RACING decals? Does the scoop supply air to the top of the engine, or does it only direct air to the air filter? I love the shaker look, but I'm more interested in keeping the temperature down under the hood.. Would a heat extractor hood make more sense? (assuming the heat extractor hood would fit over a strut tower brace..) I already have an Airaid CAI that sucks like a supernova. THX

DirtyDeeds

  • The cover is made of plastic, it does have the word Mustang on the side of it. The scoop redirects air back to the air filter so it will allow colder air to get to the intake. To keep underhood temps down a heat extractor hood would be the best option but the heat extractors would need to be in a place that they will actually pull hot air out.

    AMSam

Helpful (0)

Would this set up fit a 2005 v6, a buddy of mine said it would.

LeBlanc30

  • Hi, This shaker system is only for 05-06 Mustang GTs we do carry the shaker system for 05-09 V6 Mustangs Item#11047. Here is the link. http://www.americanmuscle.com/cdc-2005-v6-shaker-system.html

    Chris J

Helpful (0)

More Products You Might Like

Customer Reviews (16) Write a Review

Overall Rating 4.9

out of 5 stars

Installation Time:Full Day

Installation Cost:$250-$500

  • Performance Gain 3.9 3.9
  • Fit 4.9 4.9



  • 4/5

    Installation Time: Afternoon

    May 05, 2016

    CDC Shaker System (05-06 GT)

    Great looking item. And that's why you buy this item. The overall fit with my Ford Racing Cold air intake is not the best. The routing of the cold air from the shaker to the airbox is high causing the air box not to seal correctly and actually puts the hood in a bind. When closed the hood actually bows a little bit 1/8" or so. Looks like it would be the same if it was a factory airbox. Air flow from the shaker to the airbox could be much better for more horse power. I would think for the cost of this item it could be made so that the air flow was better. I will have to fabricate a better solution to attach to the Ford Racing airbox.

    TnFService

    Year: 2006 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    April 05, 2015

    AWSOME LOOK

    BOUGHT MY 06 GT WITH THIS INSTALLED , LOOKS SO GREAT.

    MIKEMUSIK410

    Year: 2006 Submodel: GT GAITHERSBURG, MD

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    August 16, 2014

    best mod for appearance

    Fit perfect and looks amazing!!! Was a tight fit with the BBK CAI but didnt have to trim. A must buy for classic shaker lovers

    05bossgt

    Year: 2005 Submodel: GT Whiteman AFB missouri

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    March 22, 2014

    Awesome look to my 05 GT convertible!

    Just finished installing this kit and it was a breeze. It looks great and gives me the retro look I like. Small amount of trimming was all I had to do to the shielding cut outs for the PCV hose and upper radiator hose. Not sure about any performance gains but it looks so cool more power is not a priority with this part. If you have the guts to cut a big hole in your hood you can install it in a few hours.

    AlanC

    Year: 2005 Submodel: GT Sacramento CA

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    November 25, 2013

    CDC Shaker / BBK Throttle Body Twin 62mm

    Unit looks great on the car. Not sure about any Performance Gain. I already had the BBK TB and because of that I had to make some small changes to get the Shaker to fit. First problem I noticed with the Shaker is how they mounted the Air tube to the scoop body. It easily broke off. I took the unit apart and added some needed washers. Other then these two items. The only part that was scary was measuring the hole for the hood. After you cut the hole everything else is easy. Good Instructions. Two people helps a lot.

    MustangForever

    Year: 2005 Submodel: GT Socal

    Helpful (1)

  • 5/5

    December 03, 2009

    CDC Shaker System

    A great product, easy to install. Gives my Mustang that 67 look, that I want. adapted well to my cold air intake. great service from American muscle. Wish they sold Crager Wheels.

    Jerry Parsley

    Helpful (10)

  • 5/5

    October 16, 2010

    Luvin' My CDC Shaker System

    Since installing it myself back in May 2010, after having a body shop cut the hole in the hood (something that I couldn't bare to watch), it has been a head turner while driving around that I've been proud to show cast. Since the early '70s muscle cars, my favorite car back then was a Hemi 'Cuda with a shaker hood. When this option was available for today's Mustang, I just had to have it on mine. Minor dislikes, that are fixable, is the thin 3M tape that comes with the kit to hold down the upper trim ring to the hood. The double back 3M tape needs to be thicker. It's not holding down the upper trim ring at the corners. Also the lower trim ring rubs on the engine cover at some spots. Noticeable when the hood is up. Other then that, I love the increase in acceleration, with the more cool air intake, like finally having that one nostril in your nose that's been closed all day that finally opens! I CAN BREATH AGAIN!! It was easy to install, one doesn't need to pay some one else to install it, except paying someone to do the cutting on the hood. You can measure the hole to be cut a 100 times, but you can only cut it once! Let a pro do it, if they screw up then it's all on them now and they can buy you a new hood. The photos by others who have purchased the shaker hood kit help me make up my mine to get it myself. It looks better then the fake stick on hoods that come with the Mustang body kits!

    Hal Ur Pal in SoCal

    Year: 2005 Submodel: GT

    Helpful (9)

  • 5/5

    March 01, 2008

    Shaker1

    excellent product but wish it had more of a direct feed into the intake like the old Mach 1 s

    Vincent

    Helpful (7)

  • 5/5

    Installation Time: Afternoon

    February 16, 2013

    Shaker System

    It was easy to put on, I just hated cutting the Hood on my 05' took about 3 hours since I am not a pro!! But makes the car look Beastly!! Regards,

    RayGT500

    Year: 2005 Submodel: GT Florida

    Helpful (1)

  • 5/5

    Installation Time: Shop Install

    October 29, 2011

    muscle look

    just bought my 2006 used and the selling point was first the look of the shaker sweet look, great addition to any mustang

    06muscle

    Year: 2006 Submodel: GT kearneysville,wv

    Helpful (1)

  • 5/5

    February 12, 2011

    Shaker System

    Love the way it makes it look! And yes it does shake. Had it installed, cutting the hood spooked me just a little.

    Ed

    Helpful (2)

  • 5/5

    April 12, 2010

    Shake Shake Shake

    Great Product...Very nice fit and finish, looks factory!

    Kevo

    Helpful (2)

  • 5/5

    Installation Time: Full Day

    January 22, 2012

    shaker

    I installed this on my own took my time and followed the instructions and had no problems. I recommend taping the hood off really good. Then I measured the marks for cutting then remeasured then remeasured again before making the cuts into the hood. Looks good and adds a old school meanness to the car!

    FifeDog

    Year: 2005 Submodel: GT Roanoke, Va.

    Helpful (1)

  • 5/5

    August 01, 2010

    CDC ShAkEr HoOd

    this is an awesome kit. it fit perfectly the FIRST time and it didn't take long.

    Paul Miller

    Helpful (1)

  • 5/5

    Installation Time: Full Day

    August 23, 2012

    CDC Shaker System

    Instructions were right on. Fit was very good, although I did have to do some trimming on the shrouding, as I was also installing a JLT cold air kit at the same time. Overall it looks good on the engine & makes a huge difference on the overall appearance of the car.

    Redman06

    Year: 2006 Submodel: GT St. Louis, MO

    Helpful (0)

  • 5/5

    Installation Time: Full Day

    March 27, 2017

    05 Mustang GT CDC Shaker

    This retro mod is really nice....easy install. .....just take your time. Measure 10 times and cut once.

    Eastside62

    Year: 2005 Submodel: GT

    Helpful (0)

Related Mustang Categories