This Mustang Parts Installation Guide Works For
Installation Time: 2 Hours
These X-pipes are designed to be used with BBK’s
Coyote Swap Headers # 1634 (chrome) 16340 (polish ceramic)
With vehicle raised in the air and supported on jackstands, pre-install the BBK Coyote
Swap Headers and the supplied studs into the headers collectors.
Lift X-pipe assembly into place and support with a jack. Connect the front flanges of the X-pipe to the header collectors. Slide X-pipe flanges over the header collector studs.
Install the nuts and washers, provided with the headers, onto the collector studs.
Connect the rear of the X-pipe to the stock flow tubes going to the mufflers.
Position X-pipe for best fit and ground clearance and tighten all nuts and bolts.