WIN a 2015 Mustang by Foose Enter Now
1-888-332-7930 M-F 9-9,Sat 9-5:30,Sun 12-4 ET

Free Shipping on Everything. Seriously. Details

C&L Cold Air Intake w/ 73mm MAF (01-04 V6)

2 Reviews
Our Price

$199.99

  • Item #98412
  • MPN# 117A

  • Market Price $227.99
  • You Save 12% ($28.00)
In Stock Ships same business day.
Free Shipping on Everything
Features
  • Maximize airflow for more horsepower
  • 73mm MAF housing - flows 700 cfm
  • Flow bench engineered and tested
  • Durable cast aluminum construction
  • High flow reusable air filter
  • Easy installation
  • No Tune Required
  • Fits 2001-2004 V6 Mustangs
  • Made in the USA
Description
Maximum Airflow. A C&L Performance Cold Air Intake kit will replace your V6's restrictive stock factory MAF, air box, and paper filter element with a high flow filter assembly to maximize airflow for a noticeable increase in horsepower, torque and performance.

Pre-calibrate 73mm MAF Housing. This C&L Performance cold air intake kit includes a brand new cast aluminum 73mm MAF housing that is already calibrated for use with the stock factory fuel injectors, MAF sensor not included.

Made in the USA. Proudly made in the USA from the highest quality materials available, this C&L Performance Cold Air Intake has been extensively flow bench tested and engineered to out perform the competition.

No Tune Required. Unlike other Cold Air Intakes on the market, the C&L CAI does not require a computer re-tune. The engineers at C&L really did their homework to improve your pony's power using the stock factory tune.

Rechargeable High Flow Filter. Included with your C&L Cold Air Kit is a high-flow, reusable, rechargeable filter. That means no more spending money on OEM paper filters that waste money and horsepower. Just clean your C&L filter, re-oil it, and put it back on to save money and enjoy better performance in one shot.

Easy Installation. C&L Performance Cold Air Intake kits are designed to install with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation.

Application. This C&L Performance Cold Air Intake System is specifically designed for use on 2001 to 2004 Mustangs equipped with either the 3.8L or 3.9L V6 engine.Technical Note. This kit reuses the factory air inlet tube.

Mustang Fitment: 2001 2002 2003 2004 Details

What's in the Box
  • (1) Air filter
  • (1) Heat shield
  • (1) 73mm MAF Housing
  • (1) Reducer
  • (1) Torx bit
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Model: 2001-2004 V6 Filter Placement: Engine Bay
Material: Cast Aluminum Finish: Natural
Manufacture: C&L Computer Tune Required: No
Will it fit my Mustang?
  • V6 - 01, 02, 03, 04

Most Helpful Reviews Read All Reviews

Overall Rating 4/5 Write a Review
4/5
Good product with some flaws

When installing the product, it is very straight foward. The maf housing is made of very durable metal with pre-drilled holes for a bracket (did not recieve any type of bracket though which was dissapointing),

Read More
Helpful (2) (0)

4/5
Cannot install properly without a mounting bracket

The install was straight forward until the mounting of the filter. The collar is heavy metal that fits into the stock intake. Without a mounting bracket to fit the pre drilled holes. The filter is supported

Read More
Helpful (1) (0)

Customer Photos

You Might Also Like

Q & A Ask a Question

is this filter a straight forward install or is this one of the filters where you have to run it through the fender well?

08gtcsN04v6 Year: 2004 Model: V6

Be the First to Answer This Question
Good Question (0) (0)

Reviews (2) Write a Review

  • 5 Stars 0 0%
  • 4 Stars 1.0 100%
  • 3 Stars 0 0%
  • 2 Stars 0 0%
  • 1 Stars 0 0%
4.0

out of 5 stars

1 Customer Recommends this Product

Installation Time:Less than 1 Hour

  • Performance Gain: 4 4/5
  • Fit: 2.5 2.5/5
  • Bang For Your Buck: 3.5 3.5/5
Filter By Sort By
  • 4/5 Yes, I recommend this product

    November 08, 2012

    Good product with some flaws

    When installing the product, it is very straight foward. The maf housing is made of very durable metal with pre-drilled holes for a bracket (did not recieve any type of bracket though which was dissapointing), and when installing the sensor in the housing it was a tight fit. Everything lined up perfectly. The heat sheild seemed a little flimsy and useless. I ended up not using it. I do wish the product would have came with a pre-fabricated bracket and screw for the already pre-drilled holes in the maf housing. I ended up having to build my own bracket and had to run to the hardware store to pick up screws which would fit the housing. All in all it is a good product. When idling the car runs smoother, and I have noticed when accelerating the car goes through the rpm's smoother as well.

    ravemustang

    Year: 2004 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 1 Granbury, TX, USA

    Helpful (2) (0)

  • 4/5 No, I do not recommend this product

    August 11, 2014

    Cannot install properly without a mounting bracket

    The install was straight forward until the mounting of the filter. The collar is heavy metal that fits into the stock intake. Without a mounting bracket to fit the pre drilled holes. The filter is supported by the plastic shield. This is not good as the filter lays on the shield, will bounce around and will not gain maximum performance from the filter. I currently have the unit supported by #10 solid electrical wire (looks bad but works). I'm hoping that I can either find a mounting bracket (1st) or I will return the product.

    mklecka

    Year: 2003 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 1 Naperville

    Helpful (1) (0)

More Products You Might Like

Related Categories