WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping - Get it by Dec. 24th available on most items - Details

Ford Performance 5.0L 4V DOHC Aluminator XS Crate Engine

Market Price $15,120.00 You Save 5% ($720.00)

$14,400.00

FREE Shipping
  • Item 50537
  • MPN# M-6007-A50XS

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • 500+ Horsepower!
  • 5.0L DOHC Aluminator XS Crate Engine (302 Cubic Inches)
  • 11.0:1 High Compression Ratio
  • Cobra Jet Intake Manifold
  • Twin 65mm "Drive by Wire" Throttle-Body
  • BOSS Fully CNC Ported Aluminum Heads
  • Mahle Hard Anodized Forged Pistons with Graphal Low Friction Coating
  • Manley H-Beam Connecting Rods with ARP2000 Bolts
  • Lightweight Aluminum Block
Power Of The "Coyote". Now you can add the power of the "Coyote" to your very own custom Mustang build with a brand new Ford Racing crate engine. Built with all new parts this Ford Racing 5.0L 4V DOHC "Aluminator XS" crate engine has extreme duty high compression forged pistons with H-beam connecting rods and features a 11.0:1 compression ratio to make over 500 Horsepower, perfect for high performance applications.

Built Ford Tough. This Ford Racing crate engine is built from a lightweight aluminum cylinder block that features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength. Assembled with Mahle hard anodized forged pistons with Graphal low friction coating, Manley H-beam connecting rods with ARP 2000 bolts, this Coyote engine includes a Boss 302 crankshaft damper, large sump 12qt capacity oil pan, Ford Racing oil filter, colder heat range 0 spark plugs, Boss valve springs, 47lb fuel injectors and Ford Racing coil covers.

High Revving Efficient Power. A 65 mm twin bore "drive by wire" throttle body in combination with a Cobra Jet intake manifold provides efficient air delivery and weight savings. The four-valve-per-cylinder fully CNC ported aluminum BOSS heads with roller-finger followers reduce friction while piston-cooling jets, optimized oil drain-back and windage control improving high-rpm performance.

Required Upgrades. The Ford Racing 5.0L 4V Aluminator XS create engine requires an Engine Control Pack and Alternator Kit for proper installation and operation.

2 Year/24,000 Mile Warranty. This crate engine carries Ford Racing's 2 year - 24,000 mile Warranty from the date of purchase for replacement or repair only.

Application. This 5.0L 32V DOHC Coyote Aluminator XS Crate Engine fits 2011-2014 GT Mustangs. It can also be used in a resto-mod or custom car build.Technical Note. Does not include vehicle harness, PCM or alternator.

NOTE: Ships Continental 48 States ONLY. No Canada, APO/FPO, Hawaii, Alaska, Puerto Rico, Guam or Us Virgin Islands.

If shipping to a business, please include the business name. Also, after your order is placed, be prepared to let us know if you will need a Lift-Gate service. You will be contacted via email before your order ships.

What's in the Box
  • (1) Engine
Installation Info

Most Helpful Reviews

5/5
Great!!

This engine is beast in my 02 mustang gt no more 4.6

Helpful (1)

5/5
great

the best engine ever you will be very happy get ready to fly

Helpful (1)

Overall Rating 5 out of 5 stars
Read All 2 Reviews

Customer Photos (1) Submit Your Photo

View 1 Photo

You Might Also Like

18 Questions / 9 Answers

Ask a Question

Could I run nitrous with this if so how much

Vince515

  • Plain and simple: Yes and as much as you wanted. Longer version: While these motors have been putting out some great numbers both NA and Boosted, a lot of the guys are saying 500HP is your safe point and others say 700+ is fine. These motors are great, but you're asking a lot of it by spraying.

    08ScarlettGT

    Good Answer (3) (0)

Show 2 more answers Question Resolved

Will this fit in a 2011 v6 mustang (with mustang of america pack... just in case this matters) and if it would what transmission would you recommend? I Also have a price limit Thanks

AntonZ

  • FORD RACING TREMEC MAGNUM XL T56 6-SPEED TRANSMISSION (05-14 GT)

    Waysidesolid

    Good Answer (0) (1)

Answer This Question I need this answered (0) (0)

what are these internals good to? I want to add boost.

BadSc281

  • The Ford Racing 5.0L 4V DOHC Aluminator XS Crate Engine comes with Mahle Hard Anodized Forged Internals that are ready for boost. Ford Racing has labeled this motor at 500hp+ it would really depend on what your setup will be with this motor. If you would like to talk more details you can give us a call and one of our Mustang Experts may be able to give you more information. I will put the link to our contact information below. http://www.americanmuscle.com/contact.html

    SalC7

    Good Answer (1) (0)

Question Resolved

Can you install this in a 2005 GT as an engine swap? I have been looking into replacing the 3V 4.6L in my 2005 GT. Just wondering if this crate engine can be installed without too much trouble? If so, what all would I need to make it work?

Callaway

  • It can be done, but it's not easy. There are several mechanical mounting issues, and many electrical differences. Our shop has done this a few times, it's not an easy swap in terms of investment.

    08ScarlettGT

    Good Answer (2) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

my question isn't exactly about the ford racing 5.0lt 4v DOHC ALUMINATOR XS create engine but more like i have a 1998 mustang with a 3.8lt V-6 and i am trying to find out what my options are with swapping out my V-6 to a V-8 and i have everything from shocks and suspension, everything under the hood is moved and i have 13 inches in front and about 8 inches on both sides clear, i have an awesome subframe conector built, a complete rear seat delete and 8 point cage and a complete dual header back 3" exhaust system ready to go in and a carbon fiber hood with a 4" cowl hood but im looking for the best engine to install with the easiest setup to swap out my 3.8. has anyone swapped out an older 3.8 and what engine would be best to run with the minimal wireing or where can I get any wireing kits to try to use my existing gauge system?

baggyjoe68

  • The frame for the 1998, have almost all the same bolt holes for either the V6 or the GT. It would most likely be easier to put in a GT motor from a 1998, and all of the holes and routing will be very close. There should be sufficient space for all the components needed, as the GT's were the same engine bay, with just different motor (for the most part).

    AMJEFF

    Good Answer (1) (0)

Question Resolved

could I put a prochager in to this engine and would it fit in a 2003 mustang gt?

topracer24

  • The Ford Performance 5.0L 4V DOHC Aluminator XS Crate Engine is able to work in conjunction with a Procharger on a 2003 Mustang GT.

    KevinD92

    Good Answer (0) (0)

Question Resolved

More Products You Might Like

Customer Reviews (2) Write a Review

Overall Rating 5.0

out of 5 stars

Installation Time:Weekend

  • Performance Gain 5 5
  • Fit 4 4



  • 5/5

    July 21, 2016

    Great!!

    This engine is beast in my 02 mustang gt no more 4.6

    JRose

    Year: 2002 Submodel: GT

    Helpful (1) (0)

  • 5/5

    Installation Time: Weekend

    March 09, 2016

    great

    the best engine ever you will be very happy get ready to fly

    tony8164

    Year: 2014 Submodel: V6

    Helpful (1) (0)

Related Mustang Categories