Perfect For Drag Racers.
Drag racers know that a differential or axle failure can cause the entire axle/brake/wheel assembly to slide completely out of the housing. This is because the stock factory c-clip only retains the axles at the portion above the spline. Because of this possibility many serious drag racers install a Moser C-Clip Eliminator Kit.How It Works.
The Moser C-Clip Eliminator Kit (a.k.a. safety hub) bolts to the stock axle housing through the existing backing plate holes to keep the axles and bearings securely in place even during an axle failure.Application.
These Moser 9300 C-Clip Eliminators are designed for 1979-1993 Mustangs with a 7.5" or 8.8" rear-end and either Moser C-Clip axles or OEM axles with a 1.400" bearing seat.
Technical Notes: Not compatible with ABS. Modifications required when using OEM disc brakes. Modification of Eliminators or Drive Studs may be necessary when using 5/8" studs.
1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Details >>