CDC Classic Chin Spoiler - Unpainted (05-09 GT)

CDC Classic Chin Spoiler - Unpainted (05-09 GT)
Click to Enlarge

TRANSCRIPT

Hi I’m Justin with AmericanMuscle.com, and I have with me CDC’s unpainted classic chin spoiler and the pre painted Mustang GT chin spoiler fitting all 05 – 09 Mustang GTs. In terms of styling you can see both spoiler options really add a lot to the front end, which in stock form can sometimes seem a little bit incomplete or unfinished. Both chin spoiler options are not quite as radical as CDC’s aggressive chin spoiler for the S197, which does offer a little more rake and will stick out slightly further. But in the end, both chin spoiler suit the front end well, and it all boils down to personal preference. As for construction, both options are made by CDC using high pressure injection molded urethane, which is going to stand up to just about any kind of abuse you can throw at it. This material is going to allow the spoiler to bend and flex without cracking, which is good just in case you ever accidentally hung up on a curb or something like that. As for the finishes you can see our classic CDC chin spoiler installed on our 2006 behind me, is unpainted which definitely looks good as is, or alternatively you can opt for the pre painted version seen back there on our 07 GT. The pre painted version is painted right here at AmericanMuscle.com headquarters, using the same base and clear coat that Ford uses in their factories, making for a perfect color match, right out of the box. Installing the chin spoiler is very easy and should only take you about an hour from start to finish. Of course you can do the install with the car on the ground but it does help to get the car up in the air slightly, just to give yourself a little more room to work. Another good thing about the install is that it requires no drilling whatsoever, instead using the supplied 3M automotive tape, and the 3M adhesion promoter. This is a very important step because it basically ensures a secure bond between the 3M automotive tape and the chin spoiler itself. Your first step is to rub that 3M adhesion promoter on the inside of the chin spoiler, on the upper portion wherever that 3M tape will go. After you get the 3M tape installed, simply reuse your factory hardware along with the two included push pins to get the job done. The CDC classic and the pre painted Mustang GT chin spoiler offer good quality materials and great fit, and are a great choice for anyone in the market looking for a front chin spoiler for their S197 GT. Be sure to check out both options right here at AmericanMuscle.com
... READ MORE

About CDC

Classic Design Concepts (CDC) Mustang Parts
Classic Design Concepts (CDC) was founded in 1990 in Metro Detroit. Now in their 22nd year; their passion remains to deliver high quality components to passionate Mustang owners. CDC designed and manufactured the original light bar for the Fox body Mustang and continues today by manufacturing in Their Michigan facility for all modern Mustangs convertibles. Today their product line includes a full range of Mustang specific parts that add well-engineered function and good looking style.
... READ MORE
OUR PRICE$199.99
Market Price $239.99You Save 17% ($40.00)
Item # 11027-00
Ships the same business day
CDC Chin Spoiler Splitter Upgrade
PRICE WITH OPTIONS $199.99
Email

Product Features

  • Quickly gives your Mustang a stylish look.
  • Attaches with push pin fasteners.
  • Made of rugged injection molded black urethane.
  • Fits 2005 to 2009 GT Mustangs.

BUY TOGETHER

CDC Classic Chin Spoiler - Unpainted (05-09 GT) - CDC 110020

Plus

CDC Splitter Upgrade (05-09 GT) - CDC 0511-7016-01

Equals

Total $399.98
Painted Mustang Chin Spoiler Great Custom Looks. Chin spoilers are one of the hottest items we sell at AmericanMuscle, so don’t get left behind when you want to make one of the most distinguishing mods on your 2005 to 2009 S197 GT Mustang. This Mustang chin spoiler comes unpainted so you can customize it however you like - it is also available pre-painted in factory colors.

Rugged Construction. Made of tough high pressure, black injection molded urethane, this chin spoiler is made to take the abuse of everyday driving.

Simple Installation. Installation is a snap with just a few plastic push pin fasteners, you’ll be back on the road in no time at all.

Recommended Styling Upgrade. Complete the aggressive styling of the Classic Design Concepts Classic Chin Spoiler with the optional CDC Splitter Upgrade. Sold separately (see drop down options above).

Application. This Mustang Chin Spoiler is designed to be a perfect fit on the 2005 to 2009 Coupe and Convertible GT Mustangs. Does not fit V6 Mustangs.

Technical Note. AmericanMuscle recommends professional installation of all body parts. We also recommended test fitting these products before they are painted.

Installation Time:

(approx) 1 Hour

Difficulty Level:

Simple installation for anyone.

What's in the box?

  • (1) Chin Spoiler
  • (1) CDC Manual
  • (1) 3m Tape Roll
  • (2) Alcohol Packs
  • (1) Adhesion Promoter
    Hardware included:
  • (2) Push Pin Fasteners
Dan here with AmericanMuscle.com, today we're taking a look at the pre-painted, CDC classic chin spoiler for your 05-09 Mustang GT, available in all the OEM factory colors. Along with the spoiler you're going to receive the installation kit which include the 3M 2 sided tape, the alcohol pads to clean it, the adhesion promoter, the push pins, as well as the instructions for easy installation. Beyond that, you’re also going to need a Philips head screwdriver as well as 80-150 grit sandpaper. The first thing you’re going to want to do is sand the underside of the top lip where your 3M tape is going to be applied to the spoiler. Once you’ve finished sanding it you’re going to want to wipe that area down with the supplied alcohol swabs to make sure you clear up any dust and debris that may be on the underside of the spoiler. Once you’ve finished cleaning that with the alcohol pads you’re going to want to take your adhesion promoter and put that along the same area as well. Now, you’re going to apply your 3M tape to the clean section and cut where appropriate. Now that the spoiler is ready, we’re going to move on to prepping the car for installation. We do recommend having someone to help as it will make the installation a lot easier for you. This chin spoiler can be installed on the ground, however it’s a little bit easier with it in the air whether on ramps or jacks. Remove the two lower screws in the wheel well that hold the liner to the bumper, for easier access to the screws in the wheel well, turn your wheels to the side you’re working on. Wipe down the lip under the lower grille, using the supplied alcohol wipes. Next apply the adhesion promoter, this is going to ensure the best bond between the bumper and the 3M tape. Peel the red backing from the tape, attach one end of the chin spoiler into the wheel opening using the two factory screws that we just removed. Then stretch the other end of the chin spoiler into the wheel opening, and press into place along the edge of the lower grille. Next, secure with the two factory screws we removed. Install the push pin retainers through the chin spoiler securing it to the bottom fascia, one on each side. And just like that, with a quick and easy installation in under 30 minutes, you can install the CDC classic chin spoiler on your 05-09 Mustang GT, getting rid of that factory overbite look the stock bumper gives you.
... READ MORE

What's in the box?

  • (1) Chin Spoiler
  • (1) CDC Manual
  • (1) 3m Tape Roll
  • (2) Alcohol Packs
  • (1) Adhesion Promoter
    Hardware included:
  • (2) Push Pin Fasteners
checkmark
Fitment:
  • GT 05, 06, 07, 08, 09
  • Bullitt 08, 09
checkmark
Known Exceptions:
Will not fit the California Special GT

Customer Reviews