WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
Mon-Sun 8:30 AM - 11:00 PM EST

Free Shipping On Orders Over $49. Details

SpeedForm Squirter Nozzle Relocation Kit (05-17 All)

Market Price $64.99 You Save 15% ($9.99)
Our Price


FREE Shipping
  • Item 11059
  • MPN# 11059

In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Sleek Clean Styling
  • Straight Forward Installation
  • Fits All 2005-2017 Mustangs

Review & Installation Video

Review & Install Video

If you’ve ditched your factory hood for an aftermarket hood and are now left looking for a solution for your windshield washers squirter location, then you’ll want to check out this CDC squirter nozzle relocation kit for all 2005 to 2012 Mustangs. The majority of people checking out this kit probably just picked up a new aftermarket hood, or are planning on picking one up very soon. The fact is, a lot of these aftermarket hoods don’t have any holes to allow for your factory washer nozzles, which makes for a much cleaner look. This kit completely saves you from drilling into that new aftermarket hood. That doesn’t mean you can’t use this kit with your factory hood, because you totally can, however if you do, you’ll be left with two big holes in your factory hood that you’ll either need to have covered or filled. What this kit actually does is relocate the nozzles from the hood, onto the actual windshield wiper arms themselves, that makes for a very sleek and clean finish when installed. Speaking of installation, getting all your hoses ran and everything installed is pretty straightforward. However, you will need to remove this plastic windshield cowl, and then drill two 5/16th“ holes just so you can run those hoses. After that, everything is pretty much a piece of cake, should take you no more than an hour at most. So if you just picked up that brand new aftermarket hood, only to find out there’s no more holes for your squirter nozzles, then this squirter relocation kit from CDC will be the solution to your problem.

Sleek Clean Styling. Now you can relocated your windshield washer squirter nozzles onto your wiper arms to give your hood a sleek clean appearance. This SpeedForm kit also works great with aftermarket aluminum and fiberglass hoods so that there is no need to drill into your new hood.

Application. This SpeedForm Mustang Squirter Nozzle Relocation Kit is designed for use on all 2005 to 2017 Ford Mustang with a stock or aftermarket hood.

Technical Notes. This system relocates the factory nozzles to the wind shield wipers. The holes left in the stock hood will need to be filled, if not covered.

Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Details

What's in the Box
  • (1) Hose Assembly
  • (5) Large Clips
  • (5) Small Clips
  • (2) Squirter Nozzles
  • (2) Alcohol Packets
Installation Info
Tech Specs
Will it fit my Mustang?
  • Boss 302 - 12, 13
  • V6 - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • Bullitt - 08, 09
  • GT - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • GT500 - 07, 08, 09, 10, 11, 12, 13, 14
  • EcoBoost - 15, 16, 17
  • GT350 - 15, 16, 17

People Who Bought This Item Also Bought

Most Helpful Reviews

Looks and works well

Install was not bad, looks and works well. It does spray fluid over the roof I figured if you need to use it, the car is already dirty.

Helpful (1)

Windshield relocation kit

Good system, easy to follow instructions. Easy install. However nozzle holes do not spray high enough windshield needed the top while positioned higher. Top 1/3 of windshield wiper path not getting wet ...

Read More
Helpful (1)

Overall Rating 3.8 out of 5 stars
Read All 50 Reviews

Customer Photos (9) Submit Your Photo

View All 9 Photos

You Might Also Like

3 Questions / 5 Answers

Ask a Question

Will this kit work with the Cervini stalker ll hood?


Helpful (0)
  • Yes, this kit will work with the Cervini Stalker II hood.


I have a 2014 gt with a cervini hood. Will this fit as well? I do not want to drill any holes.


Helpful (0)
  • The Squirter Nozzle Relocation Kit (05-12 All) will not fit the 13-14 mustangs due to a different front end. This kit will only fit the 05-12 mustangs.


Required? Do you have to have squirter nozzles? I never use mine anyways, im just wondering if i can just remove them completely to save some cash.


Helpful (0)
  • This is a personal preference. If your car is a "SHOW " car (seldom if ever on the road), then no. If your car is a daily driver it's a matter of safety. You may not use them now but in certain situations they are a great safety feature. Bugs, mud, bird &#!*...all make the ability to "WASH" your windshield a matter of safety for you and others. In the end, this is your call.


Show 2 more answers

More Products You Might Like

Customer Reviews (50) Write a Review

Overall Rating 3.8

out of 5 stars

  • 3/5

    January 11, 2017

    $50 for nozzles is a bit steep

    I couldn't find the end pieces anywhere else. The rest of the kit is just hosing. So I bit the bullet and got the kit. It works, but for what it is $50 is a bit much.


    Year: 2005 Submodel: GT

    Helpful (1)

  • 1/5

    December 30, 2016

    Didnt fit.

    It is a good kit but the lines were not long enough. I had to pull the factory set and attach it to the relocation kit and add additional couplings for it to work. Wish that the kit would come with more hose lines and connectors for thenprice you pay. Not a fan of this one.


    Year: 2011 Submodel: GT

    Helpful (1)

  • 4/5

    November 25, 2016

    Windshield relocation kit

    Good system, easy to follow instructions. Easy install. However nozzle holes do not spray high enough windshield needed the top while positioned higher. Top 1/3 of windshield wiper path not getting wet initially and not getting much water at all


    Year: 2006 Submodel: GT

    Helpful (1)

  • 2/5

    July 05, 2016


    I hit a deer with my 2006 GT and needed a new hood so I picked up this kit to go with it. I installed the kit before the hood arrived. It turned out I didn't need the kit at all as the hood came with it's own squirters (this was not mentioned anywhere when I ordered the hood so I wasted $55). So anyway, I installed the kit as directed and it doesn't really squirt at all. It is attached via double stick tape to the wiper arms and dribbles fluid onto the windshield. Nowhere near as good as stock. They are hidden so I guess that's the tradeoff. If you really want to hide the nozzles this does the trick, but the performance is poor. So poor that I am now thinking about removing the kit and using the squirters that came with the hood. They can't be any worse and they go under the hood so they are hidden as well. I may even get new wiper arms while I'm at it instead of dealing removing the tape.


    Year: 2006 Submodel: GT

    Helpful (1)

  • 3/5

    June 27, 2016

    Works great

    Works great but did not include a long enough hose to connect as the instructions provided ask you to do and cut your factory line. Overall works good, but instructions are not very clear as others mention as well.


    Year: 2012 Submodel: GT500

    Helpful (1)

  • 5/5

    June 05, 2016

    Looks and works well

    Install was not bad, looks and works well. It does spray fluid over the roof I figured if you need to use it, the car is already dirty.


    Year: 2011 Submodel: GT

    Helpful (1)

  • 1/5

    April 06, 2016


    Terrible product. Package did not come with all the 3M pieces needed, the hose was not long enough and the instructions were useless. The instructions came with "pictures" that came in black and white were useless due to how fuzzy the image was. I ended up putting unnecessary holes in the cowl and just pulled the whole thing out and sent it back. WASTE.


    Year: 2012 Submodel: GT

    Helpful (1)

  • 2/5

    March 17, 2016

    Not worth the money for a little hose and tape

    I recommend not to spend the money. Bought 2 rear spray nozzles from a 98 explorer (F87Z-17603AA), a connector and hose for under 20. Fits better than the CDC.


    Year: 2007 Submodel: GT

    Helpful (1)

  • 1/5

    May 16, 2015

    The title says squirter nozzles not barely drips water nozzles.

    The instructions are decent. The tubing was good quality. That is where the good ends and the awful begins. The plastic clips to hold the hoses come off on hot days and i had to upgrade to a better quality double sided adhesive. The item description says no drilling into your new hood which is correct except you have to drill 2 holes into the plastic panel under your wiper arms which is not mentioned. The squirters....they dont squirt. The first time i tried them i thought there must be a kink or leak in one of the hoses. After double checking all connections and trying the factory squirters i can absolutely assure you they are junk. I still have yet to find a remedy for this.


    Year: 2010 Submodel: GT Rhode island

    Helpful (1)

  • 4/5

    April 12, 2012

    Good product, lousy directions

    My pony was hit while innocently parked on my street and a new front bumper and hood were required. I decided to get a aftermarket hood instead of OEM and found that I needed this product to complete my repair. Installation was a little confusing and the directions were no help whatsoever. After figuring everything out I am very happy with the quality and they seem to work just fine. I waited on this review to see if I was happy after a few months of use. They seem to be holding up perfectly, especially through the salt and nastiness of an east-coast winter. The only reason I give 4 stars is the worthless directions.


    Year: 2011 Submodel: V6 Northern VA

    Helpful (3)

  • 4/5

    May 11, 2013

    Good product, spray not so great

    I would say that this product did complete the task of moving the spray nozzles in order to install me new hood. The issue with this kit is that the new nozzle spray is not as good as I would have expected. Another thing they should fix is the color of the hose clips, I painted mine black and it looks much better. All in all it is a decent product.


    Year: 2008 Submodel: GT Ottawa, ON, Canada

    Helpful (2)

  • 3/5

    August 14, 2012

    Cleans up hood image...pain in the butt instructions

    With a little intellect you can figure it out...the instructions are very vague...and the pictures are horrible especially when they are trying to tell you where the clips go...i contemplated using zip ties because the 3m tape would not stick...even with adhesion promoter...i dont know if i put them on in the wrong spot because the image was very difficult to tell. but with a little superglue i got it to stick. I believe these instructions were made by the manufacturer...AM could you please for the sake of your customers... PLEASE redo these instructions with better detailed images... Other than that the squirters put fluid on the glass... but again not sure if they are installed in the correct area and working properl


    Year: 2009 Submodel: V6 Broome county, NY, usa

    Helpful (2)

  • 5/5

    April 01, 2012

    Works like a charm

    I have a Cervini C Series hood and hate the squirters that come with it and have been looking for a better option for a year now. Stumbled on these and absolutely love them. Install was pretty straight forward although the directions could be a little clearer. I will mention that they really only work correctly with regular wiper blades. RainX style wipers are fatter than OE style and restrict the flow of washer fluid a bit. The only real argument, which has already been stated is the clips are grey in color?!?! I don't know about you but I have NEVER seen a ca with grey wiper arms


    Year: 2005 Submodel: GT

    Helpful (2)

  • 5/5

    January 30, 2012

    CDC Squirter Nozzle Relocation Kit (05-12 All)

    Very discreet relocation of squirter nozzles. Pretty easy installation. Tubing and nozzles don't show at all on my vehicle, good washer fluid coverage and pressure across majority of windshield. Very satisfied with this purchase.


    Year: 2005 Submodel: V6 Nashville, TN

    Helpful (2)

  • 5/5

    January 27, 2012

    Hiding the Squirt

    Bought this kit, for my 07 GT/CS because I have a new hood getting painted (Steeda 2" cowl) and I wanted the squirters hidden. Took about 20 minutes to do everything hides well and if you do it write you'll end up with extra stick on clamps to use in the future.


    Year: 2007 Submodel: Other Florida

    Helpful (2)

  • 5/5

    February 24, 2010

    Awesome Kit!

    I have this on my 2005 and it is awesome! I had to ditch my original ones when I swapped hoods.

    Candy ;)

    Year: 2005

    Helpful (2)

  • 3/5

    August 17, 2012

    Well designed kit let down by hardware

    The install went smoothly except for the removal of the wiper arms. If your car is as stubborn as mine you will need a bolt puller to remove them. All of the tubing lengths were right on. Instructions are fairly good for most parts of install. I cleaned and prepared as directed but the clips are now starting to fall off after two weeks. It's not hard to find alternate ways to hold the hose to the arms but slightly disappointing. Wiper performance appears to be fairly good. Withholding full judgement until after Canadian winter and associated dirt, ice, and salt.


    Year: 2007 Submodel: GT Calgary, Alberta, Canada

    Helpful (1)

  • 2/5

    November 14, 2011




    Year: 2009 Submodel: GT FL

    Helpful (1)

  • 5/5

    October 08, 2011

    Perfect way to hide washer nozzles

    easy install and work great! Took me about a half hour to complete. I didn't want to cut the carbonfiber hood, so this was the perfect solution!


    Year: 2010 Submodel: GT Hammond, IN

    Helpful (0)

  • 5/5

    August 16, 2011

    Great product

    Well designed works well. Now if I can only plug the holes in the hood :-)

    Denis Vandale

    Year: 2005 Submodel: GT

    Helpful (0)

Related Mustang Categories