Pypes Catted X-Pipe (05-10 GT)

Pypes Catted X-Pipe (05-10 GT)

About Pypes

Pypes Performance Mustang Exhaust
Pypes Performance Exhaust offers a comprehensive product line for Ford Mustangs that includes Headers, Full Systems, Cat-Back Systems, Axle-Back Systems, X-Pipes, Mufflers and Tips. Their ...... READ MORE

YOU MIGHT ALSO LIKE:

OUR PRICE$439.99
Market Price $488.99You Save 10% ($49.00)
Item # 20041
Ships the same business day

Product Features

  • Balance out exhaust gases for more power
  • Raspy Race Car Growl
  • Pypes modular construction
  • High-flow catalytic converters included
  • 2.5" 409 stainless steel tubing
  • Fits 2005-2010 GT Mustangs

BUY TOGETHER

Pypes Catted X-Pipe (05-10 GT) - Pypes XFM26

Plus

Pypes Polished Shorty Headers (05-10 GT) - Pypes HDR54S

Equals

Total $744.98
Balances Exhaust Gases. The Pypes Catted X-Pipe is excellent when it comes to balancing out the gas pressures in your exhaust system. This Pypes x-pipe creates more power and torque than a traditional H-pipe. Why? Because the exiting exhaust pulses are merged at the "X", resulting in less exhaust back pressure for more power.

Race Car Growl. This free flowing Pypes x-pipe for the 2005 to 2010 GT's not only increases power, but it also adds a raspy, race car growl to the sound of your exhaust with its modern "X" crossover pipe design.

Modular Construction. Pypes unique three piece modular construction makes it quick and easy to add or remove catalytic converters to your exhaust system in just minutes, depending on your driving needs.

Durable Stainless Steel Construction. Pypes uses sturdy 16 gauge 409 stainless steel mandrel bent 2.5" tubing for improved exhaust flow and features welded reinforcement plates for additional strength. The included High flow catalytic converters far out perform the restrictive stock factory cats to provide a significant increase in horsepower and torque.

Application. This Pypes Catted X-pipe is designed as a direct bolt-on for the 2005 to 2010 4.6L GT Mustangs with either aftermarket short tube headers or the stock factory manifolds and a dual catback exhaust installed.
Mid Pipe Specifications
Style Mid Pipe: Standard length "X" Type Headers Required: Shorty
Piping Material: 409 Stainless Steel Piping Size: 2.5"
Catalytic Converter: "Yes" Fitment: 2005-2010 GT Mustangs

Installation Time:

(approx) 2 Hours

Difficulty Level:

Advanced mechanical skills required.

What's in the box?

Hardware included:
  • (4) 2.5" band clamps
  • All required fastners (nuts, bolts, washers)
  • Flange gasket

What's in the box?

Hardware included:
  • (4) 2.5" band clamps
  • All required fastners (nuts, bolts, washers)
  • Flange gasket
checkmark
Fitment:
  • GT 05, 06, 07, 08, 09, 10
  • Bullitt 08, 09

Customer Reviews

4.05
  • 4/5
    Could be better
    March 9, 2010
    Robert
    First off says catted but you have to cut the pipes to fit them. Had to drill out the bolt holes to get the flanges to mount to the manifold properly because of the studs design and if you unclip the one O2 sensor it will reach. Lot of work without a lift but the sound is worthy.
    6 of 6 voted this as helpful.Yes, I recommend this product.
  • 5/5
    easy
    May 14, 2009
    Db Dolly
    This is a great system it went on very easy in my driveway. Stock exhaust came off better then i would have thought(maybe because car has 5000 miles on it)sounds great and can tell it was good for more power thanks for a great x pipe at a great price
    2 of 4 voted this as helpful.Yes, I recommend this product.
  • 3/5
    Welding+
    October 1, 2009
    Mickey
    This mod requires a little patience and a hack saw. I installed it myself, but the exhaust leaked around 1 of the clamps. I quickly noticed that the leak was due to the Pypes engineering. I took the car up to the exhaust shop and had them weld the cats on. After that everything was fine. Pypes really needs to considering offering a complete welded kit, rather than a modular one.
    3 of 6 voted this as helpful.No, I do not recommend this product.