Win a Full Raxiom Overhaul Ends 2/28   Enter To Win
1-888-332-7930 M-F 9-9 EST, Sat 9-5:30 EST

Free Shipping on Everything. Seriously. Details

White Face Reverse Glow Gauge Insert (94-98 V6)

46 Reviews
Our Price


  • Item #52010
  • Market Price $49.99
  • You Save 20% ($10.00)
In Stock Ships same business day.
Free Shipping on Everything
Product Videos Customer Photos
  • Custom race inspired style.
  • White face by day.
  • Reverse glow at night.
  • Installs over stock factory gauges.
  • Includes overlay & inverter/switch.
  • Fits 94-98 Mustang V6.

Race Ready Style. Upgrade your 1994 to 1998 Mustang V6's interior and give it a modern, race-inspired look with a set of White Face Reverse Glow Gauge Inserts. These white face reverse glow inserts give your Pony's interior a crisp, retro look by day. By night, their reverse glow makes reading them easy whether it's a grudge match or a late-night cruise.

Easy to Read. By day the gauge face is white with crisp clean markings, but by night the numbers glow bright blue, making these gauges distinctive and easy to read.

Installs Over Stock Gauges. Installation of these inserts is easy and doesn't require needle removal, so it won't disturb your gauges sensitive calibration.

Application. These white face reverse glow gauges are designed to fit 1994 to 1998 Mustang V6s with the stock factory gauge cluster.

Mustang Fitment: 1994 1995 1996 1997 1998 Details

What's in the Box
Hardware included:
  • 12V power inverter/switch
  • Dimmer knob
Installation Info
  • V6 - 94, 95, 96, 97, 98

Most Helpful Reviews View All

Overall Rating 4.5/5 Write a Review
reverse glow guages

They totally change the look of the interior! And an easy install!! Defiantly gives that raceing look Great product AM and a little tip for future buyers trim down the oil pressure and fuel guages for

Read More
Helpful (9) (0)

glow gagues

day or night, sweet look. the three sections made it so much easier to install around needles. instructions were right on. the dimmer switch is a nice touch.

Helpful (8) (1)


Hey I’m Justin with, and I’m here with a couple of different ways to trick out the interior of any Mustang, thanks to these white face reverse glow gauge inserts and matching white face View Full Transcript

Customer Photos (26) View All

You Might Also Like

Q & A (1 Questions, 3 Answers) Ask a Question

Do these light up themselves or do the lights from the gauges underneath light them?

Racer12 Year: 1997 Model: V6

Question Resolved
Good Question (0) (0)
  • They light up themselves via a separate dimmer switch which you can mount under the instrument panel. This switch is wired to the headlight switch. The existing lights do not shine through except for the needles and the numbers for miles and trip counter.

    Helpful (2) (0)

    Best Answer

    Brandon89 Year: 1998 Model: V6

Show 2 more answers

Reviews (46) Write a Review

  • 5 Stars .61 61%
  • 4 Stars .35 35%
  • 3 Stars .02 2%
  • 2 Stars 0 0%
  • 1 Stars .02 2%

out of 5 stars

43 Customers Recommend this Product

Installation Time:Afternoon

  • Fit: 4.133333 4.1/5
  • Appearance: 4.866667 4.9/5
  • Bang For Your Buck: 4.866667 4.9/5
Filter By Sort By
  • 5/5

    reverse glow guages

    September 17, 2010

    They totally change the look of the interior! And an easy install!! Defiantly gives that raceing look Great product AM and a little tip for future buyers trim down the oil pressure and fuel guages for a perfect fit and easy flow of the needles also tap into rear defrost for a ground (black wire) I found this way the easiest in my opinion


    Driving Style: Daily Driver

    Helpful (9) (0)

  • 1/5

    Not Happy At All

    February 22, 2010

    Installed on a 95. The instructions that came with it where wrong, luckily I had the Ford tech manual to look up what wires I needed as the wires on the instructions where diffrent colors. The hole for the oil pressure was to small to fit over the gauge and had to be inlarged, where the power wire is for the main gauges had to be trimed because it would show with the gauge cover installed. The only thing that I can say positive about this unit was that it looks GREAT at night! But be prepaired to take the whole gauge cluster apart a few times to get it right.

    Matthew Matherly

    Year: 1995

    Helpful (10) (2)

  • 5/5

    glow gagues

    January 05, 2010

    day or night, sweet look. the three sections made it so much easier to install around needles. instructions were right on. the dimmer switch is a nice touch.


    Helpful (8) (1)

  • 5/5

    Looks Great

    July 16, 2010

    Overall these are an excellent buy easy to install. some tips for 98 v6 3.8L coupe owners: The power wire on the headlights is not gray it is red with yellow stripes. I grounded my gauges by splicing into the rear defrost switch, the ground wire on that harness is black. Using a 3way splicing junction where you just push the wires into the junction is the easiest way to not have to solder or run extensive amounts of wire.

    Sam G

    Year: 1998 Model: V6

    Helpful (7) (1)

  • 5/5

    Great Addition

    July 20, 2009

    These are awesome! They really change the look inside your car in daylight and at night. It one of the things i get the most compliments on in my stang. Watch on install as the inserts can cause interference with the sweep of the needle.

    Scott C.

    Helpful (8) (2)

  • 5/5


    August 13, 2010

    White by the day and stunning black and blue at night. These gauges make the inside of your stang stand out! Way better than the old stock gauges, installation took an hour tops! Instaed of sodering the ground to the 5 in. Plate, find a screw on the plate, loosen it, tighten the wire to it, and there ya go!

    Alex Ramirez

    Helpful (5) (1)

  • 4/5

    Nice new look!

    July 16, 2012

    Installation was overall a couple of hours. Overall, the pod was easy to remove and disassemble. I didn't use any adhesive and I think I should have. I'd go with the two-sided tape mentioned in one review and pay particular attention to the area around the holes to ensure that the needles don't bind. careful of the guid pins on the instrument panel bezel. the two on the left side of mine were broken when I pulled out the bezel (may have been previous damage - I have never been in there before). Yes, the needles bind a bit. I tried trimming a bit, but wanted to be very careful not to over cut so I didn't actually do very much. Finding power was a bit of a pain and connecting to the wires was a bother due to tight spaces. there's probably an easier way, but this is an area I have done much work in. I love the look, but it took awhile to see them at night since it stays light very late here right now. I found the onld gauges dim in some areas. this is fully bright aross the display. I did install the dimmer on the dash above the rear defrost switch.


    Year: 1998 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 3 Edmonton, AB, Canada

    Helpful (2) (0)

  • 5/5

    great look!

    January 09, 2010

    Great product but the wires that needed to be soldered werent the ones that the instructions said it was. It said to solder the grey and black wires but my car didnt have those colors. Took a good while to do, but looks insane when finished.


    Helpful (3) (1)

  • 4/5

    White Face Glow Gauges

    August 06, 2010

    These are great addition to my Stang. The gauges were unbelievably simple to put on with the instructions provided. Though one thing made a downfall, the recalibration of the needles for oil pressure, battery voltage, Gas, etc...

    Eduardo Martinez

    Helpful (1) (2)

  • 5/5

    Awesome Product

    March 27, 2010

    Great looking gauges, really easy to install, yeah the colors of the main wire are wrong but it's easy to know which one you need to solder. I didn't have to trim anything to fit over the needles. GREAT PRODUCT AM!

    Justin Eastwood

    Helpful (0) (2)

More Products You Might Like

Related Categories